KFF6133A 1575.4 MHz GPS BPF Features • Low Loss • Low Delay • Excellent Return Loss Description Surface mount, silver (Ag) coated ceramic filter. Developed for use in GPS L1 commercial and military applications. Weight: 7.4 grams typical Material: Filter is composed of a ceramic block plated with Ag. Filter complies with RoHS standards. Electrical Specifications Parameter Passband Insertion Loss Passband Return Loss Attenuation Frequency (MHz) Typical @ 25ºC 1574.4-1576-4 0.8 dB 1574.4-1576.4 18.0 dB 1525.4 18.5 dB 1625.4 18.5 dB Spec. @ 25ºC 1.0 dB max 15.0 dB min 17.0 dB min 17.0 dB min Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB Document No. 008-0256-0 Page 1 of 2 Rev. X4VH ٠ CTS Electronic Components ٠ www.ctscorp.com ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ KFF6133A 1575.4 MHz GPS BPF Mechanical Drawing Electrical response Dim Nominal (mm) Tolerance (mm) +/- or max A B C D E F G I J 33.580 7.061 7.85 10.807 10.807 2.616 0.609 2.032 0.609 max max max 0.127 0.127 0.127 0.127 0.127 0.127 PCB Layout Packaging and Marking 10 28 Slot Foam Tray (560 max. per box) Document No. 008-0256-0 Page 2 of 2 Rev. X4VH ٠ CTS Electronic Components ٠ www.ctscorp.com ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠