CER0602A Revision B - Origin Date: May 2, 2008 – Revision Date: July 26, 2011 Features • Small Size • Low Ripple • High Rejection Description Surface mount, silver (Ag) coated barium ceramic filter. Developed for use in Broadband Wireless applications. Weight: 0.75 grams typical. Material: Filter is composed of a ceramic block plated with Ag. Filter complies with RoHS standards. Electrical Specifications Parameter Response Passband Iloss Passband Ripple Passband Return Loss @ Port 1 Passband Return Loss @ Port 2 Attneuation Frequency MHz Typical @ 25ºC Specification @ 25ºC Spec over -40ºC to +85ºC 824 - 849 824 - 849 824 - 849 824 - 849 0.1 - 2300 2390 2483 2570 -2.10 0.90 -14.50 -14.50 -22.00 -12.50 -12.50 -24.00 1 Watt max -2.40 1.10 -12.00 -12.00 -19.00 -10.00 -10.00 -22.00 -2.60 1.20 -12.00 -12.00 -19.00 -10.00 -10.00 -22.00 Power into any port Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB •“This product is covered by one or more of the following U.S. and foreign patents including: US 4,692,726;US 4,742,562; US 4,800,348;US 4,829,274;US 5,146,193;EP 0573597;DE 0573597;FR 0573597;JP 508149/92;KR 142171;US 5,162,760;US 5,218,329;US 5,250,916;US 5,327,109;US 5,488,335;CA 2114029;FR 9306297;GB 2273393;JP 3205337;KR 115113;CN 93106228.4;US 5,512,866;EP 0706719;DE 0706719;FR 0706719;GB 0706719;CN 95190359.4;US 5,602,518;US 5,721,520;US 5,745,018;EP 0910875;DE 0910875;DK 0910875;FR 0910875;GB 0910875;IE 0910875;JP 505182/98;KR 10-323013;US 5,994,978;US 6,462,629;CN 00810420.4;US 6,559,735;US 6,650,202;US 6,834,429.Other US and foreign patents pending. •CTS Corporation 2006 reserves all copyrights in the layout, design and configuration of the patterns on this product.” Document No. 008-0256-0 Page 1 of 2 - CTS Electronic Components - www.ctscorp.com - 4800 Alameda Blvd NE - Albuquerque, NM 87113 - Rev. X1 CER0602A Revision B - Origin Date: April, 2008 – Revision Date: July 26, 2011 Mechanical Drawing Dim Nominal (mm) A B C D E F G H I J Electrical response 16.41 8.50 1.00 0.50 0.50 3.80 9.40 4.60 1.00 1.00 Tolerance (mm) +/- or max Max Max 0.13 0.13 0.13 0.13 0.13 Max 0.13 Max PCB Layout Packaging and Marking DIMENSION REEL DIAMETER REEL WEIGHT REEL QUANTITY UNITS SPECIFICATION 330 mm 400 kg 500 ea. Customer Feed Direction CTS 603 YWW Document No. 008-0256-0 Wo Ao Bo Ko Po Inches/mm Inches/mm Inches/mm Inches/mm Inches/mm 1.26"/32 0.394"/9.80 0.657"/16.7 0.203"/5.15 0.630"/16.0 Page 2 of 2 - CTS Electronic Components - www.ctscorp.com – 4800 Alameda Blvd NE - Albuquerque, NM 87113 - Rev. X1