CER0426B 4965 MHz BPF Rev 1 – Origin Date: July 24, 2006 – Revision Date: January 12, 2007 Features • Low Loss • Low Ripple Description Surface mount, silver (Ag) coated ceramic filter for use in broadband applications. Weight: 1.1 grams typical Material: Filter is composed of a ceramic block plated with Ag Filter complies with RoHS standards. Electrical Specifications Parameter Passband Iloss Passband Ripple Passband Return Loss @ TX Passband Return Loss @ Ant Attenuation Frequency MHz Typical @ 25ºC Specification @ 25ºC Spec over -40ºC to +85ºC 4940 - 4990 4940 - 4990 4940 - 4990 4940 - 4990 5250 -1.0 0.3 -12.5 -12.5 -33.0 -1.2 0.6 -10.0 -10.0 -30.0 -1.6 0.8 -10.0 -10.0 -30.0 Power into any port 1 Watt max Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB •“This product is covered by one or more of the following U.S. and foreign patents including: US 4,692,726;US 4,742,562; US 4,800,348;US 4,829,274;US 5,146,193;EP 0573597;DE 0573597;FR 0573597;JP 508149/92;KR 142171;US 5,162,760;US 5,218,329;US 5,250,916;US 5,327,109;US 5,488,335;CA 2114029;FR 9306297;GB 2273393;JP 3205337;KR 115113;CN 93106228.4;US 5,512,866;EP 0706719;DE 0706719;FR 0706719;GB 0706719;CN 95190359.4;US 5,602,518;US 5,721,520;US 5,745,018;EP 0910875;DE 0910875;DK 0910875;FR 0910875;GB 0910875;IE 0910875;JP 505182/98;KR 10-323013;US 5,994,978;US 6,462,629;CN 00810420.4;US 6,559,735;US 6,650,202;US 6,834,429.Other US and foreign patents pending. •CTS Corporation 2006 reserves all copyrights in the layout, design and configuration of the patterns on this product.” Document No. 008-0256-0 Page 1 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH CER0426B 4965 MHz BPF Rev 1 – Origin Date: July 24, 2006 – Revision Date: January 12, 2007 Mechanical Drawing Dim A B C D E F G H I J K L N M Electrical response Nominal (mm) Tolerance (mm) +/- or max 11.75 Max 3.01 5.4 0.13 0.13 1.02 0.38 0.38 1.02 5.3 3.9 1.03 4.65 0.13 0.13 0.13 0.13 Max Max 0.13 Max PCB Layout 4400 4600 4800 5000 5200 5400 0 40 -10 30 -20 20 -30 10 -40 0 -50 -10 -60 -20 -70 -30 -80 -40 Packaging and Marking DIMENSION REEL DIAMETER REEL WEIGHT REEL QUANTITY UNITS SPECIFICATION mm kg ea. 330 1.7 1000 Customer Feed Direction Product Marking CTS 26B YWW Document No. 008-0256-0 Wo Ao Bo Ko Po Inches/mm Inches/mm Inches/mm Inches/mm Inches/mm .945"/24 .226"/5.73 .474/12.05 .189"/4.8 .472"/12 Page 2 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH