CER0369A 5.4 GHz BPF Rev 0 – Origin Date: July 7, 2006 – Revision Date: November 28, 2006 Features • High Rejection • Low ripple • Small Size Description Surface mount, silver (Ag) coated barium ceramic filter. Weight: 0.5 grams typical Material: Filter is composed of a ceramic block plated with Ag. Filter complies with RoHS standards. Electrical Specifications Parameter Response Passband Iloss Passband Ripple Passband Return Loss @ Port 1 Passband Return Loss @ Port 2 Attenuation Frequency MHz Typical @ 25ºC Specification @ 25ºC Spec over -40ºC to +85ºC 4900 - 5850 4900 - 5850 4900 - 5850 4900 - 5850 4200 8000 -0.9 0.3 -12.5 -12.5 -27.0 -25.0 -1.1 0.6 -10.0 -10.0 -23.0 -18.0 -1.5 0.8 -10.0 -10.0 -23.0 -18.0 Power into any port 1 Watt max Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB •“This product is covered by one or more of the following U.S. and foreign patents including: US 4,692,726;US 4,742,562; US 4,800,348;US 4,829,274;US 5,146,193;EP 0573597;DE 0573597;FR 0573597;JP 508149/92;KR 142171;US 5,162,760;US 5,218,329;US 5,250,916;US 5,327,109;US 5,488,335;CA 2114029;FR 9306297;GB 2273393;JP 3205337;KR 115113;CN 93106228.4;US 5,512,866;EP 0706719;DE 0706719;FR 0706719;GB 0706719;CN 95190359.4;US 5,602,518;US 5,721,520;US 5,745,018;EP 0910875;DE 0910875;DK 0910875;FR 0910875;GB 0910875;IE 0910875;JP 505182/98;KR 10-323013;US 5,994,978;US 6,462,629;CN 00810420.4;US 6,559,735;US 6,650,202;US 6,834,429.Other US and foreign patents pending. •CTS Corporation 2006 reserves all copyrights in the layout, design and configuration of the patterns on this product.” Document No. 008-0256-0 Page 1 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH CER0369A 5.4 GHz BPF Rev 0 – Origin Date: July 7, 2006 – Revision Date: November 28, 2006 Mechanical Drawing Dim Nominal (mm) Tolerance (mm) +/- or max 6.8 max 1.35 3.86 0.25 0.13 0.66 0.66 0.66 0.66 3.8 2.8 2.6 0.76 0.13 0.13 0.13 0.13 max max max 0.13 A B C D E F G H I J K L M N Electrical response 4200 4700 5200 5700 6200 PCB Layout 6700 7200 7700 8200 0 -10 -20 -30 -40 -50 -60 Packaging and Marking DIMENISION UNITS SPECIFICATION REEL DIAMETER mm 330 REELWEIGHT kg 1.5 REEL QUANTITY ea. 1000 Customer Feed Direction Product Marking CTS 369 YWW Document No. 008-0256-0 Wo Ao Bo Ko Po Inches/mm Inches/mm Inches/mm Inches/mm Inches/mm 0.630"/16 0.161"/4.1 0.280"/7.1 0.102"/2.6 0.315"/8.0 Page 2 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH