CER0273A 1007.1 MHz BPF Rev 0 – Origin Date: April 7, 2006 – Revision Date: April 7, 2006, 2005 Features • Low Loss • Low Ripple Description Surface mount, silver (Ag) coated ceramic filter for use in broadband applications. Weight: 1.33 grams typical. Material: Filter is composed of a ceramic block plated with Ag. Filter complies with RoHS standards. Electrical Specifications Parameter TX to Antenna Response Passband Iloss Passband Ripple Passband Return Loss @TX Passband Return Loss @ Ant Attenuation Frequency MHz Typical @ 25ºC Specification @ 25ºC Spec over -40ºC to +85ºC 994 - 1020 994 - 1020 994 - 1020 994 - 1020 862 1152 -0.8 -0.1 -14.0 -14.0 -56.0 -23.0 -1.0 -0.4 -10.0 -10.0 -15.0 -10.0 -1.1 -0.4 -10.0 -10.0 -15.0 -10.0 Power into any port 3 Watt max Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB •“This product is covered by one or more of the following U.S. and foreign patents including: US 4,692,726;US 4,742,562; US 4,800,348;US 4,829,274;US 5,146,193;EP 0573597;DE 0573597;FR 0573597;JP 508149/92;KR 142171;US 5,162,760;US 5,218,329;US 5,250,916;US 5,327,109;US 5,488,335;CA 2114029;FR 9306297;GB 2273393;JP 3205337;KR 115113;CN 93106228.4;US 5,512,866;EP 0706719;DE 0706719;FR 0706719;GB 0706719;CN 95190359.4;US 5,602,518;US 5,721,520;US 5,745,018;EP 0910875;DE 0910875;DK 0910875;FR 0910875;GB 0910875;IE 0910875;JP 505182/98;KR 10 -323013;US 5,994,978;US 6,462,629;CN 00810420.4;US 6,559,735;US 6 ,650,202;US 6,834,429.Other US and foreign patents pending. •CTS Corporation 2006 reserves all copyrights in the layout, desi gn and configuration of the patterns on this product.” Document No. 008-0256-0 Page 1 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH CER0273A 1007.1 MHz BPF Rev 0 – Origin Date: April 7, 2006 – Revision Date: April 7, 2006, 2005 Mechanical Drawing Dim Nominal (mm) A B C D E F G H J K 7.05 10.92 1.50 1.02 1.02 0.94 0.94 3.93 1.56 1.55 Tolerance (mm) +/- or max Max Max 0.13 0.13 0.13 0.13 0.13 Max 0.13 0.13 PCB Layout Electrical response Packaging and Marking DIMENSION REEL DIAMETER REEL WEIGHT REEL QUANTITY UNITS mm kg ea. SPECIFICATION 330 1.7 500 Customer Feed Direction Wo Ao Bo Ko Po Inches/mm Inches/mm Inches/mm Inches/mm Inches/mm 0.163"/4.15 0.630"/16 0.945"/24 Document No. 008-0256-0 0.443"/11.25 0.289"/7.35 Page 2 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH