XCBC0822A 380-960 vs 1710-2690 MHz Cross-Band Combiner Features High-power handling in small size Low Insertion Loss and Ripple Wide passband response. Low Pass and High Pass in one Applications Wireless Infrastructure applications Usable in systems with 2 bands of up to 6 W/band or 4 bands of up to 3 W/band. Part Dimensions: 10.2 × 5.1 × 1.8 mm • 0.2 g Description Surface mount wide band diplexer valued for combining <1GHz bands with >1.7GHz bands to share an antenna or common signal path. Electrical Specifications Parameter Nominal Impedance Average Input Power per port Peak Input Power per port Average Combined Output Power Peak Combined Output Power Frequency Typical Spec. Spec. over (MHz) - at 25⁰C 50 ohms - at 25⁰C - -40⁰C to +85⁰C 6.0 Watt max 60 Watt max 12.0 Watt max 120 Watt max 380 - 960 380 - 960 1710 - 2180 2180 - 2690 0.3 dB 18 dB 21 dB 20 dB 0.5 dB max 16 dB min 20 dB min 17 dB min 0.5 dB max 16 dB min 20 dB min 17 dB min 1710 - 2690 1710 - 2180 2180 - 2690 698 - 960 380 - 698 0.3 dB 18 dB 15 dB 21 dB 20 dB 0.5 dB max 16 dB min 13 dB min 20 dB min 17 dB min 0.5 dB max 16 dB min 13 dB min 20 dB min 17 dB min Low-band to Antenna Response Passband Insertion Loss (5 MHz avg) Passband Return Loss Attenuation: High-band to Antenna Response Passband Insertion Loss (5 MHz avg) Passband Return Loss: Attenuation: Note: CTS tests each unit to the critical specifications above. Subsequent audits may deviate due to repeatability among different test systems which shall not exceed these allowances. 2016-03-10 Rev. D Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Attenuation 1.0 dB Page 1 of 2 ©2016 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. PRELIMINARY - XCBC0822A 380-960 vs 1710-2690 MHz Cross-Band Combiner Mechanical Drawing DL ANT UL Electrical Response 2016-03-10 Rev. D Pin Assignments And PCB Layout Page 2 of 2 ©2016 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.