Model 137 Stratum 3, DIL OCXO (SMT or TH) FEATURES • • • • • Compliant to Stratum 3 of GR-1244-CORE Surface Mount or Thru hole DIL Package 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging DESCRIPTION The CTS Model 137 is a low cost, small size, high performance OCXO. The high quality CTS Quartz Crystal used in this OCXO offers high stability and low jitter/phase noise, making it the ideal choice for any telecommunications system. Applications • Telecom Switching • Wireless Communication • Timing over Packet RoHS Status ELECTRICAL SPECIFICATIONS Parameter Conditions & Remarks Min Typical Max Unit -40 - +85 °C 3.135 4.75 - 3.3 5.0 1.8 3.465 5.25 2.5 steady state @ 25°C - 0.75 1.0 W Output to Ground 5 10 15 pf Frequency FNOM 10 10, 12.8, 16.384, 19.44, 20, 25, 26 26 MHz Calibration ∆F/FNOM; TA=25°C; at time of shipment - ± 0.2 ± 0.5 ppm vs Operating Temperature -40°C to +85°C - ±0.1 ppm vs Supply Voltage ± 5% - ±5 ppb Per day, at time of shipment - - ±5 ppb Aging first year - - ± 500 ppb - - ±3.5 ppm 24-Hour Holdover Stability 10 years Inclusive of operating temp and 24 hours aging drift (Stability option R) Under all operating conditions for 10 years - - 0.37 ppm - - ± 4.6 ppm Operating Conditions Operating Temperature Range (optional) TOP Supply Voltage See How to Order table (Vcc) during warm up Power Consumption Load Vdc W Frequency Stability Std Frequencies: Total Free-Run Accuracy 137-series Page 1 - 7 Rev B North America: +1-800-982-5737 • International: +1-508-435-6831 • Asia: +65-655-17551 • [email protected] Specifications are subject to change without notice Model 137 Stratum 3, DIL OCXO (SMT or TH) ELECTRICAL SPECIFICATIONS (Continued) Parameter Conditions & Remarks Min Typical Max Unit - - ± 40 ppb Frequency Stability continued Drift (24 hours) Constant temperature per GR-1244-CORE Wander Generation Warm-Up Time MTIE and TDEV per Stratum 3 requirements of Telcordia GR-1244-CORE TA=25°C; to within 10ppb of freq. @ 30 min - - 5 minutes ± 8.0 ± 10 - ppm Electronic Frequency Control - EFC (option) Frequency Tuning (Vc) Fmin @ Vc = 0.1 Vcc Fmax @ Vc = 0.9 Vcc (at time of shipment) Output Parameters Output Signal, Square Wave HCMOS Amplitude Rise / Fall Times 10% to 90% @ 10pf load Duty Cycle @ 50 % of output signal Phase Noise (20MHz) VOL - - 10%VCC VOH 90% VCC - - - 3 5 Vdc ns 45 50 55 % 10 Hz - -105 - dBc/Hz 100 Hz - -135 - dBc/Hz 1 kHz - -150 - dBc/Hz - -154 - dBc/Hz - - -70 dBc 10 kHz Spurious Mechanical and Environmental MSL Maximum reflow temperature, 245°C for 10 seconds, 240°C for 20 seconds, per IPC/JEDEC J-STD-020D Note: Not intended for inverted reflow. Level 1 RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU Shock : 500 G’s, 1msec, 5 shocks in each of 6 directions Sinusoidal Vibration : 10 Hz to 55 Hz with a double amplitude of 1.5 mm, 10 g’s peak from 55 Hz to 2000Hz, for 30 minutes in each of three perpendicular directions Random Vibration : 5.35 G’s RMS. 20 to 500 Hz, per MIL-STD-202F, Method 214, 15 minutes each axis. Seal : Hermetic Marking Permanency : MIL-STD-202F, Method 215J. Packaging : Tape and Reel for Surface Mount Package; Bulk Pack in Foam for Thru-Hole Package Storage Temperature Range: -45°C to +95°C Soldering 137-series Page 2 - 7 Rev B North America: +1-800-982-5737 • International: +1-508-435-6831 • Asia: +65-655-17551 • [email protected] Specifications are subject to change without notice Model 137 Stratum 3, DIL OCXO (SMT or TH) How to Order Model 137 Stability N Code Stability N R T ±250 ppb ±100 ppb ±50 ppb Temp Range B Supply Voltage E EFC N Package Style T Frequency Code M Code Specification Code Specification D 5V ± 5% T Thru hole E 3.3V ± 5% S SMT Code V N Specification EFC None Temp range Code Frequency (MHz) A B C D G 0 to 50°C 0 to 70°C -10 to 60°C -20 to 70°C -40 to 85°C 10M000 10.000 12M800 12.800 16M384 16.384 19M440 19.440 20M000 20.000 25M000 25.000 Standard Frequencies Code 26M000 26.000 Custom XXMXXX Part Number Example: 137RBENT10M000 Model 137 Stability Matrix Temp Range A (0 to 50°C) B (0 to 70°C) C (-10 to 60°C) D (-20 to 70°C) G (-40 to 85°C) 137-series Stability R N T (±250 ppb) (±100 ppb) (±50 ppb) * * * * * * * * * * * * * Page 3 - 7 Rev B North America: +1-800-982-5737 • International: +1-508-435-6831 • Asia: +65-655-17551 • [email protected] Specifications are subject to change without notice Model 137 Stratum 3, DIL OCXO (SMT or TH) MECHANICAL SPECIFICATIONS Figure 1 - PACKAGE DRAWING – Surface Mount Pad termination finish: Gold flash < 10 µ inch, over Ni plated Cu CTS** 137XXXXX XXMXXX YYWW XXXXXX 137-series Page 4 - 7 Rev B North America: +1-800-982-5737 • International: +1-508-435-6831 • Asia: +65-655-17551 • [email protected] Specifications are subject to change without notice Model 137 Stratum 3, DIL OCXO (SMT or TH) Figure 2 - PACKAGE DRAWING – Through Hole Lead Termination Finish : Solder Coated, 96.5% / 3.5% Sn/Ag CTS** 137XXXXX XXMXXX YYWW XXXXXX 137-series Page 5 - 7 Rev B North America: +1-800-982-5737 • International: +1-508-435-6831 • Asia: +65-655-17551 • [email protected] Specifications are subject to change without notice Model 137 Stratum 3, DIL OCXO (SMT or TH) Packing: Tape and Reel 137-series Page 6 - 7 Rev B North America: +1-800-982-5737 • International: +1-508-435-6831 • Asia: +65-655-17551 • [email protected] Specifications are subject to change without notice Model 137 Stratum 3, DIL OCXO (SMT or TH) 137-series Page 7 - 7 Rev B North America: +1-800-982-5737 • International: +1-508-435-6831 • Asia: +65-655-17551 • [email protected] Specifications are subject to change without notice