Model 122 OCXO – Ultra High Stability HCMOS / SINE WAVE Features RoHS Status 8MHz to 100MHz frequency range High stability – to 0.2 ppb over -10C to +60C Low aging rate – to 0.2 ppb/day, 0.03 ppm/year Low allan variance – up to 3E-12 at 1s Sine wave or HCMOS output Applications Rubidium Standard Replacement GPS Disciplined Frequency Standards Instrumentation Communication Systems Description The Model 122 series combines the advantage of the double-oven and internal heated resonator (IHR) technologies providing less than 1W power consumption at as high as 0.2ppb temperature stability and 0.2ppb/day aging (for 10MHz frequency) in a 20 x 20 mm package. The Model 122 oscillators are excellent to use in high-end clock systems, instrumentation, and other applications where ultra high stability and miniature size are required. Electrical Specifications Parameter Frequency Range Initial Frequency Tolerance Frequency Stability Operating Temperature Range Symbol Condition F Min 8 ∆F/F ∆F/F Supply Voltage VCC Power Consumption P 100 MHz Note ppm 0.2 ppb See “How to Order” Vs. Supply voltage 0.2 ppb VCC ±5% Vs. Aging / Day Vs. Aging / Year 0.2 30 ppb +70 C See “How to Order” dBc/Hz For 10MHz Oscillator -30 -103 -135 -158 -167 -169 -170 4.75 3.14 warm-up state steady state, 25C after 30 days 3E-12 1Hz 10Hz 100Hz 1kHz 10kHz 100kHz After 30 min following 24 hours off Retrace Unit Vs. Operating temperature C: -10C to +60C 1s SSB Phase Noise Max ±0.1 T Allan Variance Typ 20 ppb 5.0 3.3 5.25 3.47 V 1.0 4.5 1.2 W North Americas: +1-800-757-6686 • International: +1-508-435-6831 • Asia: +65-655-17551 • www.ctscorp.com • RevB0214 Specifications are subject to change without notice 1 Model 122 OCXO – Ultra High Stability HCMOS / SINE WAVE Electrical Specifications Parameter HCMOS / TTL Output Levels Symbol Condition Min HCMOS/TTL VH Typ 3.8 45 L +8 RL 50 Control Voltage Operational frequency ≤ 25MHz Operational frequency > 25MHz VC VCC = 5.0V VCC = 3.3V V 10 ns 55 % +10 dBm -40 0 0 Reference Output VREF VCC = 5.0V VCC = 3.3V Warm Up Time τ to ∆F/F = 1E-8, +25C 4.2 2.8 0.5 4.0 2.7 4.2 2.8 10MHz output frequency 10MHz output frequency Order Code S Ω none from FNOM Pull Range 10MHz output frequency Order Code H 0.4 -30 Harmonics Sub-Harmonics Note V Rise / Fall time Duty Cycle Unit 10kOhms / 15pF VL Sine Wave Output Levels Max dBc dBc Frequency multiplier used V Tuning slope positive ppm 4.5 2.9 V 5 min Ref. to frequency after 30 min North Americas: +1-800-757-6686 • International: +1-508-435-6831 • Asia: +65-655-17551 • www.ctscorp.com • RevB0214 Specifications are subject to change without notice 2 Model 122 OCXO – Ultra High Stability HCMOS / SINE WAVE Environmental and Mechanical Conditions Parameter Condition -60°C to +90°C Storage Temperature Hermetically sealed Humidity Per MIL-STD-202, 30G, half sine pulse, 11ms Per MIL-STD-202, 5G swept sine to 500Hz Mechanical Shock Vibration Hand solder only Soldering Conditions Epoxy ink or laser engraved Markings - Model 122 Package 122 How to Order Stability Temperature Range Supply Voltage Aging Output T D E C H Dimensions (mm) 20 x 20 Code Specification T 5x10-10 U 2x10-10 Code Specification A 0°C to 50°C B 0°C to 70°C C -10°C to 60°C D -20°C to 70°C E -30°C to 70°C Code Code Per day Per year J G 0.5ppb 0.2ppb 0.05ppm 0.03ppm Specification Code - Frequency, MHz 10 Specification D 5V ± 5% H HCMOS E 3.3V ± 5% S Sine wave North Americas: +1-800-757-6686 • International: +1-508-435-6831 • Asia: +65-655-17551 • www.ctscorp.com • RevB0214 Specifications are subject to change without notice 3 Model 122 OCXO – Ultra High Stability HCMOS / SINE WAVE Package Model 122 Pin # 1 2 3 4 5 Connection GND Output VCC Electrical Tuning VREF North Americas: +1-800-757-6686 • International: +1-508-435-6831 • Asia: +65-655-17551 • www.ctscorp.com • RevB0214 Specifications are subject to change without notice 4