5 6 8 7 This drawing is the property of Tusonix, Inc., and may not be used, reproduced, published or H disclosed to others without expressed authorization by Tusonix Inc. 4 2 3 DATA SHEET DRAWING 1 Electrical testing per Tusonix standard test plans and MIL-Std-202 H test methods. G G F F .010 [0.25] E GLASS MENISCUS NOT TO EXCEED SURFACE NOTES 1. MATERIAL: SHELL: C1215 FM STEEL (NO LEAD). LEAD: ALLOY 52% Ni, 48% Fe GLASS SEAL: CORNING 9010 OR EQUIVALENT ELECTRICAL GRADE COMPRESSION GLASS. (GLASS TO BE DARK BLUE IN COLOR. SHADE TO BE CONSISTENT WITHIN LOT AS WELL AS FROM LOT TO LOT) 2. ALL DIMENSIONS SHOWN AFTER PLATING. 3. FINISH - GOLD PLATE PER TUSONIX P.P.S. 0014 - TYPE III (99.9% MIN.), CLASS F 100 MICROINCHES THICKNESS OVER 2OO MICROINCHES NICKEL UNDER PLATE. 4. MAX. GLASS SEAL LEAKAGE 1 X 10-8 CC/SEC. OF HELIUM AT 1 ATM. 5. SURFACES FREE OF ALL MARKS AND BURRS. 6. END OF LEAD TO BE STRAIT CUT AND FREE OF BURRS. 7. CTS/TUSONIX RESERVED NON RoHS COMPLIANT PART NUMBER 4311-000. CTS/TUSONIX RESERVED RoHS COMPLIANT PART NUMBER 4311-000LF, CUSTOMER MUST SPECIFY RoHS OR NON-RoHS COMPLIANT PART WHEN ORDERING. D C E D C 8. RoHS COMPLIAT PART NUMBER MARKED WITH A GREEN DOT FOR IDENTIFICATION. Cx (pF) B +100% -0% TBD DC WORKING VOLTAGE TBD 10 MHz TBD I DC I.R. MIN @ 100 VDC 5A TBD DIMENSIONS: ENGLISH UNITS - INCHES METRIC UNITS - [ mm ] 10 GHz 1 GHz TBD 100 MHz TBD DWV 250 VDC REVISION RECORD REV DATE CHG BY CHANGE A 07-17-14 R.C. ORIGINAL RELEASE REV DATE REV CHG BY CHANGE DATE TUCSON, ARIZONA .01 CHG BY CHANGE A 3 Place 8 7 6 5 SOLDER MOUNT EMI FILTER B --TOLERANCES-- Dwn R.C. 05-07-14 Ckd R.C. 05-07-14 Unless Otherwise TO Scale: NOT Material SCALE Specified SEE NOTES 2 Place ORIENTATION TBD Title 4 Sheet 1 of 1 A .005 3 A SK8379-000 2 1