AA™3900 Thermal Sliding Door - Architectural Detail Manual

OCTOBER, 2010
AATM3900 THERMAL SLIDING DOOR
FEATURES
Features
•
•
•
•
High performance ratings for structural, air infiltration, thermal efficiency and
water resistance.
Tested to applicable North American Standards:
AAMA / NWDA / CSA 101 / I.S.2 / A440
Mitered panel and frame corners.
Available as OX, XO, OXO and OXXO configurations.
•
•
•
OOX and XOO configurations possible with optional vertical mullion.
Accommodates 1" and 1-5/16" infills.
Handle options in a variety of styles and finishes.
Heavy duty stainless steel casters.
•
•
•
•
•
Stainless steel track insert for sliding panels.
Stainless steel 1-point and 2-point hookbolt locks and keepers.
Optional applied interior insect screens.
Polyamide thermal break allows two-color option.
Permanodic® anodized finishes in 7 choices.
• Painted finishes in standard and custom choices.
Product Applications
•
•
The AATM3900 is a high performance, thermal sliding door for use in condominiums,
lofts, hotels and apartments.
The AATM3900 is intended to be installed in "punched" openings or as a liner frame
within other Kawneer framing or curtain wall systems.
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC-97911-22
For specific product applications,
Consult your Kawneer representative.
kawneer.com
1
kawneer.com
© Kawneer Company, Inc., 2010
BLANK PAGE
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AATM3900 THERMAL SLIDING DOOR
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
OCTOBER, 2010
EC-97911-22
OCTOBER, 2010
AATM3900 THERMAL SLIDING DOOR
EC-97911-22
3
INDEX
TYPICAL ELEVATIONS............................................................................ 4
STANDARD DETAILS........................................................................... 5, 6
INTERIOR INSECT SCREEN............................................................... 7, 8
HARDWARE............................................................................................. 9
THERMAL CHARTS.......................................................................... 10-14
GUIDE SPECIFICATIONS..................................................................... 1-6
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED
ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT
CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR
GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR.
Metric (SI) conversion figures are included throughout these details for reference.
Numbers in parentheses ( ) are millimeters unless otherwise noted.
The following metric (SI) units are found in these details:
m –meter
cm – centimeter
mm –millimeter
s –second
Pa –pascal
MPa –megapascal
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Architects – Most extrusion and sliding door types illustrated in this catalog are standard products for Kawneer.
These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details
are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility.
Please contact your Kawneer representative or Kawneer's Architectural Services Team for further assistance.
Kawneer reserves the right to change configurations without prior notice when deemed necessary
for product improvement.
kawneer.com
1
7
3
5
2
10
Opp.
4
3
6
7
3
1
6
5
7
Opp.
Opp.
Opp.
4
2
3
1
7
6
Opp.
Opp.
8
2
2
7
6
5
Opp.
Opp.
Opp.
4
4
XO UNIT
3
4
OOX UNIT
1
6
2
OX UNIT
1
3
6
9
2
4
OXO UNIT
3
7
4
OXXO UNIT
kawneer.com
© Kawneer Company, Inc., 2010
TYPICAL ELEVATIONS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AATM3900 THERMAL SLIDING DOOR
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
OCTOBER, 2010
EC-97911-22
Elevations are number keyed to details.
1
7
© Kawneer Company, Inc., 2010
kawneer.com
3/8"
(9.5)
3/8"
(9.5)
2
SILL
(SLIDING PANEL)
4-1/4"
(107.9)
2-1/4"
(57.2)
2-5/16"
(58.7)
2-1/4"
(57.2)
FRAME HEIGHT
OPENING DIM.
4-1/4"
(107.9)
FRAME HEIGHT
OPENING DIM.
3/8"
(9.5)
1-1/4"
(31.7)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
3/8"
(9.5)
4-3/4"
(120.6)
FRAME HEIGHT
OPENING DIM.
2-5/16"
(58.7)
1-1/4"
(31.7)
FRAME HEIGHT
OPENING DIM.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
OCTOBER, 2010
AATM3900 THERMAL SLIDING DOOR
EC-97911-22
STANDARD DETAILS
SCALE 3" = 1'-0"
4-3/4"
(120.6)
1
HEAD
(SLIDING PANEL)
3
HEAD
(FIXED PANEL)
4
SILL
(FIXED PANEL)
5
1-1/4"
(31.7)
3/8"
(9.5)
4-1/4"
(107.9)
FRAME WIDTH
5
JAMB
(SLIDING PANEL)
4-1/2"
(114.3)
6
INTERLOCKS
8-5/8"
(219.1)
8
MEETING STILES
2-1/4"
(57.2)
FRAME WIDTH
OPENING DIM.
OPENING DIM.
3/8"
(9.5)
7
JAMB
(FIXED PANEL)
7-3/4"
(196.9)
9
LOCK STILE
4-1/2"
(114.3)
10
FIXED MULLION
kawneer.com
© Kawneer Company, Inc., 2010
STANDARD DETAILS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AATM3900 THERMAL SLIDING DOOR
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4-3/4"
(120.6)
6
OCTOBER, 2010
EC-97911-22
SCALE 3" = 1'-0"
2-5/16"
(58.7)
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
OCTOBER, 2010
kawneer.com
AATM3900 THERMAL SLIDING DOOR
EC-97911-22
INTERIOR INSECT SCREENS
SCALE 3" = 1'-0"
HEAD
INSECT SCREEN
INTERLOCK
INSECT SCREEN
SILL
INSECT SCREEN
INSECT SCREEN
LOCK JAMB
7
LOCK STILE
MULLION
INSECT SCREEN
MEETING STILES
kawneer.com
© Kawneer Company, Inc., 2010
INTERIOR INSECT SCREENS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AATM3900 THERMAL SLIDING DOOR
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
8
OCTOBER, 2010
EC-97911-22
SCALE 3" = 1'-0"
INSECT SCREEN
AATM3900 THERMAL SLIDING DOOR
OCTOBER, 2010
EC-97911-22
HARDWARE
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
STANDARD EXTERIOR PULLS
FINGER PULL
(BLANK)
OPTIONAL EXTERIOR PULLS
"D" PULL
WITH CYLINDER
FINGER PULL
WITH CYLINDER
STANDARD INTERIOR PULLS
"D" PULL
WITH LEVER
"D" PULL (BLANK)
OXXO INACTIVE PANEL
OPTIONAL INTERIOR PULLS
INTERIOR PULL
WITH THUMBTURN
"D" PULL
(BLANK)
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
LOCKING OPTIONS
HARDWARE FINISHES
SATIN BLACK - Powder Coat Paint
BONE WHITE - Powder Coat Paint
SILVER GRAY - Powder Coat Paint
SATIN NICKEL - Plated
BRIGHT BRASS - Plated, PVD Coated
kawneer.com
1 POINT LOCK
2 POINT LOCK
STANDARD CASTER
9
AATM3900 THERMAL SLIDING DOOR
10
OCTOBER, 2010
THERMAL CHARTS
EC-97911-22
Project Specific U-Factor
Example Calculation
(Based on OXO Sliding Door Unit)
3'-0"
4-1/2"
3'-0"
7-3/4"
3'-0"
2-1/4"
2-1/4"
2-1/4"
7'-0"
6' 5-1/2"
5-1/2"
7' 4-1/2"
5-1/2"
2-1/4"
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
10' 4-3/4"
Vision Area
Total Daylight (Vision) Area = 2(3' x 7') + 1(3' x 6.45') = 61.35 ft2
Projected Total Area = 7.375' x 10.39' = 76.63 ft2
Percent of Vision Glass
= (Total Daylight Area ÷ Projected Total Area)100
= (61.35 ÷ 76.63) 100 = 80%
kawneer.com
© Kawneer Company, Inc., 2010
Example Glass U-Factor
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
= 0.48 Btu/(ft2·h·°F)
AATM3900 THERMAL SLIDING DOOR
OCTOBER, 2010
EC-97911-22
11
THERMAL CHARTS
System U-Factor vs Percent of Vision Area
0.90
(5.00)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.85
0.80
0.45
0.35
2
(2.00)
0.30
85
80%
75
70
Based on a OXO Unit of 80% vision glass and center of glass
U-Factor of 0.48, system U-Factor is equal to 0.57 Btu/(h·ft2·°F)
© Kawneer Company, Inc., 2010
(2.50)
0.40
Vision Area / Total Area (%)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
(3.00)
65
(1.50)
System U-factor
0.50
0.20
kawneer.com
(3.50)
0.57
0.55
( mW·°C )
0.60
0.25
90
(4.00)
0.65
Btu
h·ft2·°F
(2.73)
(2.61)
(2.50)
(2.39)
(2.27)
(2.16)
(2.05)
(1.93)
(1.82)
(1.71)
(1.59)
(1.48)
(1.37)
(1.25)
(1.14)
0.70
)
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
E IGN
PL S
M E
A D
EX OR
F
T
O
(N
COG
U-factor
(4.50)
0.75
AATM3900 THERMAL SLIDING DOOR
OCTOBER, 2010
THERMAL CHARTS
EC-97911-22
System U-Factors for Vision Area
0.90
(5.00)
0.85
0.80
(4.50)
0.75
0.70
0.50
0.45
2
0.55
(2.73)
(2.61)
(2.50)
(2.39)
(2.27)
(2.16)
(2.05)
(1.93)
(1.82)
(1.71)
(1.59)
(1.48)
(1.37)
(1.25)
(1.14)
(3.00)
(2.50)
0.40
0.35
(2.00)
0.30
0.25
(1.50)
0.20
85
80
75
70
65
Vision Area / Total Area (%)
kawneer.com
© Kawneer Company, Inc., 2010
90
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
(3.50)
( mW·°C )
0.60
COG
U-Factor
System U-Factor
(4.00)
0.65
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Note:
Values in parentheses are metric.
COG = Center Of Glass.
Charts are generated per AAMA 507.
Btu
h·ft2·°F
12
AATM3900 THERMAL SLIDING DOOR
OCTOBER, 2010
EC-97911-22
13
THERMAL CHARTS
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
0.80
0.75
COG
SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
System SHGC
0.70
0.75
0.00
90
85
80
75
70
65
Vision Area / Total Area (%)
0.80
0.75
COG
VT
0.70
0.75
0.65
0.70
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.15
0.10
0.10
0.05
0.05
0.00
90
kawneer.com
85
80
75
Vision Area / Total Area (%)
70
65
System VT
0.60
0.65
© Kawneer Company, Inc., 2010
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System Visible Transmittance (VT) vs Percent of Vision Area
AATM3900 THERMAL SLIDING DOOR
OCTOBER, 2010
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
EC-97911-22
Thermal Transmittance 1 (BTU/hr • ft • °F)
Overall U-Factor 4
0.48
0.59
0.46
0.58
0.44
0.56
0.42
0.55
0.40
0.54
0.38
0.52
0.36
0.51
0.34
0.50
0.32
0.48
0.30
0.47
0.28
0.45
0.26
0.44
0.24
0.43
0.22
0.41
0.20
0.40
SHGC Matrix 2
Visible Transmittance 2
Glass SHGC 3
Overall Glass U-Factor 4
Glass VT 3
Overall VT 4
0.75
0.58
0.75
0.56
0.70
0.54
0.70
0.52
0.65
0.51
0.65
0.49
0.60
0.47
0.60
0.45
0.55
0.43
0.55
0.41
0.50
0.39
0.50
0.37
0.45
0.36
0.45
0.34
0.40
0.32
0.40
0.30
0.35
0.28
0.35
0.26
0.30
0.24
0.30
0.22
0.25
0.21
0.25
0.19
0.20
0.17
0.20
0.15
0.15
0.13
0.15
0.11
0.10
0.10
0.10
0.07
0.05
0.06
0.05
0.04
NOTE: For glass values that are not listed, linear interpolation is permitted.
1. U-Factors are determined in accordance with NFRC 100.
2. SHGC and VT values are determined in accordance with NFRC 200.
3. Glass properties are based on center of glass values and are obtained from your glass supplier.
4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of
2000mm wide by 2000mm high (78-3/4" by 78-3/4").
kawneer.com
© Kawneer Company, Inc., 2010
Glass U-Factor 3
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
14