POLY-FUSE® Resettable PTCs Surface Mount > 1206L Series 1206L Series Description The 1206L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. t3P)4DPNQMJBOUMFBEGSFF and halogen-free t'BTUSFTQPOTFUPGBVMU currents t$PNQBDUEFTJHOTBWFT board space Agency Approvals AGENCY t-PXSFTJTUBODF t-PXQSPmMF t$PNQBUJCMFXJUIIJHI temperature solders Applications AGENCY FILE NUMBER t64#QFSJQIFSBMT t%JTLESJWFT t$%30.T t1MVHBOEQMBZQSPUFDUJPO for motherboards and peripherals E183209 R50119118 t.PCJMFQIPOFTCBUUFSZ and port protection t%JTLESJWFT t1%"TEJHJUBMDBNFSBT t(BNFDPOTPMFQPSU protection Electrical Characteristics I trip (A) V max (Vdc) I max (A) Pd typ. (W) Part Number Marking I hold (A) 1206L012 A 0.125 0.29 30 100 1206L016 B 0.16 0.37 30 100 C 0.20 0.42 24 D 0.25 0.50 E 0.35 0.75 J 0.35 0.75 16 100 0.6 F 0.50 1.00 6 100 0.6 1206L020 1206L025 1206L035 1 1 1 1206L035/16 1206L050 1 Maximum Time To Trip Resistance Agency Approvals Current (A) Time (Sec.) R min (Ω) R 1max (Ω) 0.6 1.00 0.20 1.500 6.00 X X 0.6 1.00 0.30 1.200 4.50 X X 100 0.6 8.00 0.10 0.650 2.60 X X 16 100 0.6 8.00 0.08 0.550 2.30 X X 6 100 0.6 8.00 0.10 0.300 1.20 X X 8.00 0.10 0.300 1.20 X X 8.00 0.10 0.150 0.70 X X 1206L050/15 M 0.50 1.00 15 100 0.6 8.00 0.10 0.150 0.75 X X 1206L075/13.2 G1 0.75 1.50 13.2 100 0.6 8.00 0.20 0.090 0.35 X X G 0.75 1.50 8 100 0.6 8.00 0.20 0.090 0.29 X X H 1.10 2.20 8 100 0.8 8.00 0.10 0.040 0.21 X X K 1.50 3.00 8 100 0.8 8.00 0.30 0.040 0.12 X X 1206L075TH 1206L110TH 1206L150TH 1 1 1 1206L175 V 1.75 3.50 6 100 0.8 8.00 0.50 0.020 0.09 X X 1206L200 L 2.00 3.50 6 100 0.8 8.00 1.50 0.018 0.08 X X P d = Power dissipated from device when in the tripped state at 20°C still air. I hold = Hold current: maximum current device will pass without tripping in 20°C still air. I trip = Trip current: minimum current at which the device will trip in 20°C still air. R min = Minimum resistance of device in initial (un-soldered) state. V max = Maximum voltage device can withstand without damage at rated current (I max) R typ = Typical resistance of device in initial (un-soldered) state. I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) R 1max = Maximum resistance of device at 20°C measured one hour after tripping or reflow soldering of 260°C for 20 sec. Caution:0QFSBUJPOCFZPOEUIFTQFDJmFESBUJOHNBZSFTVMUJOEBNBHFBOEQPTTJCMFBSDJOHBOEnBNF 1 Some older references to these devices may include “–C“ in the Part Number. The “–C“ should be omitted when placing new orders for the device. © 2012 Littelfuse, Inc Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1206L.html for current information. 27 1206L Series Revised: June 6, 2012 1206L Series Features POLY-FUSE® Resettable PTCs Surface Mount > 1206L Series Temperature Rerating Ambient Operation Temperature -40°C -20°C 0°C 20°C 1206L012 0.18 0.16 0.14 0.125 1206L016 0.22 0.20 0.18 0.16 1206L020 0.28 0.25 0.23 0.20 1206L025 0.37 0.33 0.29 0.25 1206L035 0.50 0.45 0.40 0.35 1206L035/16 0.50 0.45 0.40 40°C 50°C 60°C 70°C 85°C 0.10 0.09 0.08 0.07 0.05 0.14 0.12 0.10 0.09 0.08 0.17 0.15 0.14 0.12 0.09 0.22 0.20 0.17 0.15 0.12 0.30 0.27 0.24 0.21 0.15 0.35 0.30 0.27 0.24 0.21 0.15 Hold Current (A) Part Number 1206L050 0.71 0.64 0.57 0.50 0.42 0.39 0.35 0.31 0.25 1206L050/15 0.71 0.64 0.57 0.50 0.42 0.39 0.35 0.31 0.25 1206L075/13.2 1.14 1.04 0.88 0.75 0.65 0.59 0.54 0.49 0.41 1206L075TH 1.14 1.01 0.88 0.75 0.65 0.59 0.54 0.49 0.41 1206L110TH 1.52 1.37 1.25 1.10 0.92 0.82 0.75 0.64 0.52 1206L150TH 2.18 1.94 1.72 1.50 1.28 1.17 1.06 0.96 0.77 1206L175 2.50 2.25 2.00 1.75 1.55 1.45 1.35 1.25 1.10 1206L200 2.60 2.44 2.35 2.00 1.78 1.67 1.50 1.45 1.10 Average Time Current Curves Temperature Rerating Curve 0.12A 0.16A 0.20A 0.25A 0.35A, 0.35A/15V 0.50A, 0.50A/15V 0.75A 0.75A/13.2V 1.1A 1.5A 1.75A 2.0A 170% Percentage of Rated Current 150% 1206L 100 130% 110% 90% 70% 50% Time in Seconds 30% 10 10% -40 -30 -20 -10 0 10 20 30 40 Temperature (°C) 50 60 70 80 1 0.1 0.01 0.1 1 10 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected CZBOVNCFSPSWBSJBCMFTBOEUIFTFDVSWFTQSPWJEFEBTHVJEBODFPOMZ$VTUPNFSNVTU verify the performance in their application. 28 1206L Series Revised: June 6, 2012 © 2012 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1206L.html for current information. POLY-FUSE® Resettable PTCs Surface Mount > 1206L Series Soldering Parameters Reflow Peak Temp/ Duration Time 260°C / 10 Sec Time above liquids (TAL) 220°C 60 Sec ~ 100 Sec Preheat 120°C~ 180°C 50 Sec ~ 150 Sec Storage Condition ¡$_¡$3) Soldering 260 Cooling 220 Temperature (°C) Condition t3FDPNNFOEFESFnPXNFUIPET*3WBQPSQIBTFPWFOIPUBJS PWFO/2 environment for lead–free Preheating 180 120 t%FWJDFTDBOCFDMFBOFEVTJOHTUBOEBSEJOEVTUSZNFUIPETBOE solvents. 0 50 to 150 Note:*GSFnPXUFNQFSBUVSFTFYDFFEUIFSFDPNNFOEFEQSPmMF devices may not meet the performance requirements. 60 to 100 1206L Series t3FDPNNFOEFENBYJNVNQBTUFUIJDLOFTTJTNNJODI 120 Time(s) Environmental Specifications Physical Specifications Terminal Material Solder-Plated Copper (Solder Material: Matte Tin (Sn)) Operating/Storage Temperature -40°C to +85°C Lead Solderability .FFUT&*"4QFDJmDBUJPO34& ANSI/J-STD-002 Category 3. Maximum Device Surface Temperature in Tripped State 125°C Passive Aging ¡$IPVST UZQJDBMSFTJTUBODFDIBOHF Humidity Aging ¡$3)IPVST UZQJDBMSFTJTUBODFDIBOHF Thermal Shock .*-o45%o.FUIPE( +85°C/-40°C 20 times UZQJDBMSFTJTUBODFDIBOHF Solvent Resistance .*-o45%o.FUIPE No change Vibration .*-o45%o$.FUIPE Condition A No change Moisture Sensivity Level -FWFM+o45%o$ © 2012 Littelfuse, Inc Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1206L.html for current information. 29 1206L Series Revised: June 6, 2012 POLY-FUSE® Resettable PTCs Surface Mount > 1206L Series Dimensions MARKING CODE VARIES WITH AMPERAGE RATING (SEE ELECTRICAL CHARACTERISTICS CHART) SHOWN IS 1.0 AMP RATING C A Top View Bottom View N Side View B N 1.80 mm (.071) Pad Layout D E 1.00 mm (.040) A Part Number B Inches Min 1.80 mm (.071) mm Max Min Max Inches Min Max C mm Inches D mm Inches Min Max Min Max Min Max 1206L012 0.03 0.06 0.65 1.45 1206L016 0.03 0.06 0.65 1.45 1206L020 0.02 0.04 0.5 1 1206L025 0.02 0.04 0.5 1 1206L035 0.02 0.03 0.45 0.75 1206L035/16 0.02 0.03 0.45 0.75 1206L050 1206L050/15 0.12 0.13 3 3.4 0.06 0.07 1.5 1.8 0.02 0.03 0.45 0.75 0.02 0.03 0.45 0.75 1206L075/13.2 0.03 0.05 0.75 1.25 1206L075TH 0.02 0.03 0.45 0.75 1206L110TH 0.01 0.02 0.30 0.60 1206L150TH 0.02 0.04 0.50 1206L175 0.03 0.08 0.80 1.8 0.03 0.07 0.80 1.6 30 Revised: June 6, 2012 Max Inches Min Max mm Min Max Min Min Max 0.01 0.03 0.25 0.75 0.002 0.018 0.05 0.45 1 1206L200 1206L Series E mm © 2012 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1206L.html for current information. POLY-FUSE® Resettable PTCs Surface Mount > 1206L Series Part Ordering Number System 1206 L xxx /xx TH Y R PACKAGING STYLE R: Tape & Reel QUANTITY CODE: W=3000 Y=4000 P=2000 SERIES LOW PROFILE DEVICE INDICATOR (Required, for L075, L110 and L150 device orders only. Refer to “C” in Dimensions section.) SPECIAL VOLTAGE RATING ITEM (Applicable only to 1206L035/16 and 1206L050/15. Refer to Electrical Characteristics Table for additional information) I HOLD HOLD CURRENT CODE (Refer to Electrical Characteristics Table) Packaging Options Part Number Ordering Number Halogen Free I hold (A) I hold Code Packaging Option Quantity Quantity/Pack Code 1206L012 1206L012WR Yes 0.125 012 Tape and Reel 3000 WR 1206L016 1206L016WR Yes 0.16 016 Tape and Reel 3000 WR 1206L020 1206L020YR Yes 0.20 020 Tape and Reel 4000 YR 1206L025 1206L025YR Yes 0.25 025 Tape and Reel 4000 YR 1206L035 1206L035YR Yes 0.35 035 Tape and Reel 4000 YR 1206L035/16 1206L035/16YR Yes 0.35 035 Tape and Reel 4000 YR 1206L050 1206L050YR Yes 0.50 050 Tape and Reel 4000 YR 1206L050/15 1206L050/15YR Yes 0.50 050 Tape and Reel 4000 YR 1206L075/13.2 1206L075/13.2WR Yes 0.75 075 Tape and Reel 3000 WR 1206L075TH 1206L075THYR Yes 0.75 075 Tape and Reel 4000 YR 1206L110TH 1206L110THYR Yes 1.10 110 Tape and Reel 4000 YR 1206L150TH 1206L150THWR Yes 1.50 150 Tape and Reel 3000 WR 1206L175 1206L175PR Yes 1.75 175 Tape and Reel 2000 PR 1206L200 1206L200PR Yes 2.00 200 Tape and Reel 2000 PR © 2012 Littelfuse, Inc Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1206L.html for current information. 31 1206L Series Revised: June 6, 2012 1206L Series L: LITTELFUSE SURFACE MOUNT PPTC DEVICE SIZE CODE (0.12 x 0.06 inch) POLY-FUSE® Resettable PTCs Surface Mount > 1206L Series Tape and Reel Specifications TAPE SPECIFICATIONS: EIA-481-1 (mm) Packaging Code “YR”: 1206L020 1206L025 1206L035 1206L035/16 1206L050 1206L050/15 1206L075TH Packaging Code “WR”: 1206L012 1206L016 1206L110TH Packaging Code “PR”: 1206L150TH 1206L160 1206L175 1206L200 W 8.15+0.15-0.30 8.00+/- 0.30 8.15+0.15-0.30 H REEL DIMENSIONS: EIA-481-1 (mm) 16.0+/- 0.2 F 3.50+/- 0.05 3.50+/- 0.05 3.50+/- 0.05 W 9+/- 0.5 E1 1.75+/- 0.10 1.75+/- 0.10 1.75+/- 0.10 D Ø 60.2+/−0.5 D0 1.55+/- 0.05 1.55+/- 0.05 1.55+/- 0.05 F Ø 13.0+/- 0.5 D1 1.00 (MIN) 1.00 (MIN) 1.00 (MIN) C Ø 178+/- 1.0 P0 4.00+/- 0.10 4.00+/- 0.10 4.00+/- 0.10 H1 11+/- 0.5 P1 4.00+/- 0.10 4.00+/- 0.10 4.00+/- 0.10 W1 2.5+0.5 P2 2.00+/- 0.05 2.00+/- 0.05 2.00+/- 0.05 W2 3.0+0.5 A0 1.95+/- 0.10 1.95+/- 0.10 1.95+/- 0.10 W3 4.0+0.5 B0 3.65+/- 0.10 3.65+/- 0.10 3.65+/- 0.10 W4 5.0+0.5 T 0.25+/- 0.10 0.25+/- 0.10 0.25+/- 0.10 K0 0.87+/- 0.10 1.30+/- 0.10 1.70+/- 0.10 Leader min. 390 390 390 Trailer min. 160 160 160 H P1 P2 D0 E1 P0 W4 W3 D F W T W2 W F D2 C W1 A0 K0 H1 B0 32 1206L Series Revised: June 6, 2012 © 2012 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/1206L.html for current information.