E87010-A0260-T002-A5-MCC Model 95+ Handle Assembly 100A Fusible Disconnect Fixed Mounted Instruction Sheet March, 2013 Item Quantity Description 1 1 Operator Mechanism 2 1 Driver Plate Hazardous voltage. Will cause death, serious injury, or property damage. 3 1 Swing Plate Turn off power before working on this equipment. 4 1 Mounting Plate 5 1 Side Bracket 6 2 Captive Screw 7 8 10-32 x 3/8” Screw 8 2 Retaining Ring 9 4 10-32 x 1/2” Screw 10 1 Lever Assembly 7 5 3 Installation These two parts are shipped pre-assembled. 7 9 Exploded view for clarity. 9 1 2 7 7 4 7 6 1 10 8 7 These six parts are shipped pre-assembled. Exploded view for clarity. IMPORTANT THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES, THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE. THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF OR MODIFY ANY PRIOR OR EXISTING AGREEMENT, COMMITMENT OR RELATIONSHIP. THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES OR MODIFY THE EXISTING WARRANTY. Siemens Industry, Inc. 5300 Triangle Parkway, Norcross, GA 30092 For replacement parts information or an application guide, visit our website at www.usa.siemens.com/mcc or contact your local Siemens sales office. ©2013 Siemens Industry, Inc. All Rights Reserved Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective companies. Specifications are subject to change without notice. A5E32113887