Data Sheet

®
Electrocomponents
Series 223H Data Sheet
Tactile Switch
4.7 x 3.5mm Compact
Tactile Switch
Features
Optimized Mechanical Features
• Surface mount gull-wing and J bend terminal
configurations
• Compatible with IR reflow and manual soldering
Optimized Contact System
• Excellent tactile feedback
Materials
• Silver coated terminals for better solderability
• High temperature materials (UL94V-0)
• RoHS compliant
Electrical and Mechanical Specifications
Switch Contact Resistance
100 milliohms maximum
Storage Temperature
- 40°C to +85°C
Insulation Resistance
100 Megohms minimum between
terminals
Push Strength
3 Kgf maximum
Maximum Rating
50 mA -12 VDC
Actuation Life
160 gf: 200,000 cycles
220 gf: 100,000 cycles
Dielectric Strength
250 VAC for 1 minute between adjacent
terminals
Operating Force
160 or 220gf
Travel
0.3, 0.25 mm
Allowable Solder Time
IR Reflow: Up to 5 seconds at 260°C.
Manual soldering: Up to 3 seconds at 350°C
Packaging
Standard : Tape and reel packaging with
330mm diameter reel and 12mm wide plastic tape
Operating Temperature
- 40°C to +85°C
1-4
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
11/5/15
www.ctscorp.com
CTS SERIES 223HM... - Surface Mount Gull Wing, Without Ground Terminal
2
1
2.7
2.6
2
1
23
0.75 +0.1
-0
Holes
4.4
4
4
3
3.5
6.8
4.7
6.4
0.7
2
1
2.75
L
CIRCUIT DIAGRAM
3
4
1.65
optional boss
optional boss
PCB LAYOUT
0.5
0.2
0.6
0.6
0.2
1.4
0.2
3.5
optional boss
3.7
DIMENSION : mm
STANDARD TOLERANCE :
.X (1 PLACE) : ±0.2
1.7
2.75
CTS SERIES 223HM...G - Surface Mount Gull Wing, With Ground Terminal
2
1
2.6
5
1.75
2
3
4
1
2
4
3.5
2.5
4.4
3
6.8
1.7
6.4
2.6
1
2- 0.75 +0.1
-0 Holes
2.75
4
3
L
CIRCUIT DIAGRAM
0.7
3.5
1.65
optional boss
PCB LAYOUT
0.5
0.2
0.6
optional boss
0.6
0.2
1.4
0.2
2.7
optional boss
1.7
2.1
0.4
3.7
DIMENSION : mm
STANDARD TOLERANCE :
.X (1 PLACE) : ±0.2
0.4
2.75
2 -4
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
11/ 5/15
www.ctscorp.com
CTS SERIES 223HJ... - Surface Mount J Bend, Without Ground Terminal
1
2
0.7
2.6
2
1
2-
Holes
4.0
4
3
4
3
0.75 +0.1
-0
3.5
L
6.0
4.7
5.5
2.7
2
1
2.75
CIRCUIT DIAGRAM
3
3.5
1.65
PCB LAYOUT
0.5
optional boss
0.2
1.4
0.2
0.6
4
optional boss
0.6
3.7
DIMENSION : mm
STANDARD TOLERANCE :
.X (1 PLACE) : ±0.2
optional boss
1.7
2.75
CTS SERIES 223HJ...G - Surface Mount J Bend, With Ground Terminal
1
2
5
2.6
1
2
6.0
4
3
4
3
3.5
4.0
1.7
5
2.5
2
1
2.6
4.7
5.5
1.75
2- 0.75 +0.1
-0 Holes
2.75
L
CIRCUIT DIAGRAM
4
3
3.5
0.7
optional boss
PCB LAYOUT
0.5
0.2
0.6
0.2
1.65
1.4
2.7
optional boss
0.6
2.1
0.4
3.7
DIMENSION : mm
STANDARD TOLERANCE :
.X (1 PLACE) : ±0.2
optional boss
1.7
0.4
2.75
3 -4
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
11/5/15
www.ctscorp.com
Ordering Information
223H – M
Termination
M: SURFACE MOUNT GULL WING
J : SURFACE MOUNT J BEND
Actuating Direction
S: SIDE
S
A
A
R
B
G
Ground Terminal
G : WITH GROUND TERMINAL
BLANK: NO GROUND TERMINAL
Actuator Force
&
Travel
A: 160 gf, 0.25mm
B: 220 gf, 0.3mm
Boss
B : WITH BOSS
BLANK: NO BOSS
Packaging
R : TAPE & REEL PACKAGING
Actuator Length “L”
A: 4.5 mm
!!!Note:
Consult CTS for other common features not
listed.
4-4
CTS Electrocomponents
© 2015 CTS Corporation. All rights reserved. Information subject to change.
11/5/15
www.ctscorp.com