Download

Contents
Device markers
1366810000 – 2013/2014
Device markers
Device markers
Introduction
E.2
DMC MultiCard – equipment identification via wire and cables
E.6
ESG MultiCard – cross-manufacturer equipment identification
E.8
SM MultiCard – marker system for control and signalling devices
E.24
CC MultiCard – identification of electrical installations and switchgear
E.32
Tag rails – identification for side-by-side devices
E.40
MetalliCard – aluminium and stainless steel markers
E.42
Labels – self-adhesive markers for equipment identification
E.46
KSW – PCB plug-in connector labels
E.54
E
E.1
Introduction
Device markers
Markers for devices and installations
Device and installation markers round off our range of switchgear markers.
Employing our device markers means you will be in compliance with official
regulations on the marking of electrical equipment. Weidmüller offers
corresponding markers for devices made by well-known manufactures. Mirroring
their original counterparts, these markers are attached with the traditional
adhesive or rapid clip-on techniques. By using the corresponding software and
system-compatible printer or plotter system, you can print your own markings on
these markers.
ESG
The ESG MultiCard markers are for all wellknown device manufacturers; with all-purpose
usage thanks to self-adhesive or snap-on
markers.
E
ClipCard
ClipCard MultiCard markers are a genuine
alternative to engraving. Flexible fastening
options using holders, tag rails, self-adhesive,
screws or rivets.
E.2
1366810000 – 2013/2014
Introduction
Device markers
DMC
The marking surface (12 x 27 mm) is large
enough to hold information about the device
and its function. The markers are fastened to
a wire or cable by means of a simple clip-on
mechanism.
SwitchMark
SwitchMark MultiCard markers are ideal for
identifying control and signalling equipment.
E
ELS
Optimally designed for use in WKM cable
markers or SchT 5-type tag carriers, the ELS tags
meet the highest requirements where prominent
identification of cables and terminal strips is
needed.
PrintJet ADVANCED
In combination with the M-Print® PRO
software, the PrintJet ADVANCED inkjet
printer is the optimum addition to the
MultiCard range for high-quality, resistant,
colour printing on site.
www.PrintJetADVANCED.com
1366810000 – 2013/2014
E.3
Introduction
Device markers
Markers for devices and installations
Device and installation markers round off our range of
switchgear markers. Employing our device markers means
you will be in compliance with official regulations on the
marking of electrical equipment. Weidmüller offers corresponding markers for devices made by well-known manufactures. Mirroring their original counterparts, these markers
are attached with the traditional adhesive or rapid clip-on
techniques. By using the corresponding software and
system-compatible printer or plotter system, you can print
your own markings on these markers.
Weidmüller also offers ready-to-use printed labels in the
form of a Symbol Packs or Service Packs.
E
A samples box containing a selection of device and installation markers is available under the order no. 1646370000.
Cable ducts
Automatic switchgear
Contactors
Electrical connections
Electrical devices
Machines
LED displays
Keyboards
Lamps
Murr valve plug
Tubes
Circuit-breakers
Relays
Shelves
Switches
Control desk
Transformers
Valves
E.4
DMC
ESG
SwitchMark
l
l
l
l
l
l
l
l
l
l
ClipCard
MetalliCard
Labels
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
1366810000 – 2013/2014
Device markers
E
1366810000 – 2013/2014
E.5
DMC MultiCard – equipment identification via wire and cables
Device markers
DMC MultiCard
Reliable equipment identification on wires and cables
Snap-fit mechanism for absolutely secure attachment
Maximum visibility when labelling switching devices or
components can be achieved using the single-piece DMC
markers. The sophisticated snap-fit mechanism gives a
reliable hold on multi-core control cables, as well as on
individual wires. This is a valuable advantage when critical
equipment informations needs to be well positioned in order
to be visible, even with extremely tight space constraints. It
should be firmly fixed to wire and cable diameters from
1.5 to 7.5 mm.
E
PrintJet ADVANCED
Plotter MCP Plus
Plotter MCP Basic
DMC – the benefits to you
•Clever: snap-fit mechanism for quick and secure
application
•Versatile: can be attached to one or more connection
wires
•Distinctive: a large labelling area gives you all the
information at a glance
Creates space: equipment identification for clear additional
information can be simply attached to wires or cables.
Technical data
Material
UL 94 flammability rating
Temperature range
Marking surface
Suitable for cable diameters
And wire cross-sections
Simply and securely: the clip assembly onto wires with
cross-sections from 0.5 to 10 mm2.
Polyamide 66, halogen-free
V2
–40 °C ... 100 °C
12 x 27 mm
1.5 – 7.5 mm
0.5 – 10 mm2
Ordering data
Colour
Special printing
Possible printing systems
E.6
International colour code colours, not contained in the range, are available
on request.
Minimum order quantity: 48 Qty.
Specify special printing and colours, per Excel file or using the
M-Print® PRO software.
PrintJet ADVANCED, PrintJet PRO, PrintJet, Plotter MCP Plus,
Plotter MCP Basic
Absolutely secure grip thanks to the snap-fitting and the
flexible hinge assembly on the rear.
1366810000 – 2013/2014
DMC MultiCard – equipment identification via wire and cables
DMC 12/27
27 mm
Device markers
DMC MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-4 °C...100 °C
Conductor O.D., min. / max.
Conductor connection cross-section, min. / max.
1.5...7.5 mm
0.5...10 mm²
Width
Length
27 mm
12 mm
E
Ordering data
MultiCard Blank
white
yellow
MultiCard custom printing
to customer specification
m
l
Type
DMC 12/27 MC NE WS
DMC 12/27 MC NE GE
DMC 12/27 MC SDR
Qty.
50
50
Order No.
1016030000
1018190000
10
1038830000
Technical drawing / application
1366810000 – 2013/2014
E.7
ESG MultiCard – cross-manufacturer equipment identification
Device markers
ESG MultiCard
For independent manufacturer equipment identification
More clarity thanks to the uniform marking matrix
You can solve the identification of independent
manufacturer equipment with the uniform and
systematically constructed ESG-type MultiCard range. The
carefully matched components bring together equipment
from different manufacturers strictly and systematically, in
a uniform marking matrix, which is reinforced by the highquality and brilliance of the PrintJet ADVANCED printing.
In this way you can create perfect clarity in the electrical
cabinet at the highest level of professionalism.
ESG-markers are available for equipment from the following
manufacturers, including: ABB-Stotz, AEG, Beckhoff,
Berneker & Rainer, Eaton-Moeller, Festo, Lumberg, Siemens
and Telemecanique (Schneider Electric).
E
PrintJet ADVANCED
Plotter MCP Plus
Plotter MCP Basic
ESG – the benefits to you
•Manufacturer-independent: for equipment from the
best-known providers
•Systematic: perfectly matching marking components in
one range
•Compatible: a suitable marker for every device
•Time saving: no pre-selection needed – fast installation
procedures
Individual signs of the ESG-range are compatible with our
universal-use sign rails which are particularly suitable for
rows of equipment and switches.
Technical data
Material
UL 94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Polyamide 66
V2
–40 °C
100 °C
As well as snapping on, you can also fasten in place
using the adhesive which provides an alternative method
of securing and gives a secure attachment for every
application.
Ordering data
Colour
Special printing
Possible printing systems
Not printable with
E.8
International colour code colours, not contained in the range, are available
on request.
Minimum order quantity: 48 Qty.
Specify special printing and colours, per Excel file or using the
M-Print® PRO software.
PrintJet ADVANCED, PrintJet PRO, PrintJet, Plotter MCP Plus,
Plotter MCP Basic
SMark Laser with self-adhesive markers
1366810000 – 2013/2014
ESG MultiCard – cross-manufacturer equipment identification
ESG 5/10
5 mm
ESG 6/15
6 mm
Device markers
ESG MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Beckhoff, Turck, SAI distributor
5 mm
10 mm
Self-adhesive
6 mm
15 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG 5/10 MC NE WS
Qty.
400
Order No.
1919940000
80
1038840000
l
l
l
l
ESG 5/10 MC SDR
m
l
Type
Qty.
Order No.
ESG 6/15 K MC NE WS
ESG 6/15 K MC NE GE
200
200
1880100000
1880130000
40
1880090000
ESG 6/15 K MC SDR
Technical drawing / application
1366810000 – 2013/2014
E.9
ESG MultiCard – cross-manufacturer equipment identification
ESG 6/15 F
6 mm
ESG 6/15 RIDERSERIES
6 mm
Device markers
ESG MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Festo
6 mm
15 mm
Riderserie SCM/SRC
6 mm
15 mm
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
l
Type
ESG 6/15 F MC NE WS
Qty.
200
Order No.
1136810000
Type
ESG 6/15 RIDER MC NE WS
ESG 6/15 RIDER MC NE GE
ESG 6/15 RIDER MC SDR
Qty.
200
200
Order No.
1881280000
1378710000
40
1881290000
m
l
Technical drawing / application
E.10
1366810000 – 2013/2014
ESG MultiCard – cross-manufacturer equipment identification
ESG 6/17
6 mm
ESG 6.6/11
6.6 mm
Device markers
ESG MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Self-adhesive
6 mm
17 mm
6.6 mm
11 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
Type
Qty.
Order No.
m
Type
ESG 6.6/11 BHZ 5.00/02
Qty.
200
Order No.
1082490000
ESG 6.6/11 BHZ 5.00 SDR
200
1346330000
l
l
l
l
m
l
ESG 6/17 K MC NE WS
ESG 6/17 K MC NE GE
ESG 6/17 K MC SDR
200
200
1880120000
1880110000
40
1880080000
Technical drawing / application
1366810000 – 2013/2014
E.11
ESG MultiCard – cross-manufacturer equipment identification
ESG 6.6/15
6.6 mm
ESG 6.6/20
6.6 mm
Device markers
ESG MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
6.6 mm
15 mm
6.6 mm
20 mm
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG 6.6/15 BHZ 5.00/03
Qty.
200
Order No.
1082520000
Type
ESG 6.6/20 BHZ 5.00/04
Qty.
200
Order No.
1082540000
ESG 6.6/15 BHZ 5.00 SDR
200
1346320000
ESG 6.6/20 BHZ 5.00 SDR
40
1221520000
l
l
l
l
m
l
Technical drawing / application
E.12
1366810000 – 2013/2014
ESG MultiCard – cross-manufacturer equipment identification
ESG 7/20
7 mm
ESG 8/10
8 mm
Device markers
ESG MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Riderserie SCM/SRC
7 mm
20 mm
Siemens AS-Interface
8 mm
10 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
l
Type
ESG 7/20 SIRIUS MC NE WS
ESG 7/20 SIRIUS MC NE GE
Qty.
200
200
Order No.
1736181044
1736181687
Type
ESG 8/10 ASI MC NE WS
ESG 8/10 ASI MC SDR
Qty.
200
Order No.
1736190000
40
1770470000
m
l
ESG 7/20 SIRIUS SDR
40
1766650000
Technical drawing / application
1366810000 – 2013/2014
E.13
ESG MultiCard – cross-manufacturer equipment identification
ESG 8/11
8 mm
ESG 8/13.5/43.3
8 mm
Device markers
ESG MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Beckhoff, WAGO I/O Module
8 mm
11 mm
WI SAI AKTIV
8 mm
13.5 mm
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG 8/11 MC NE WS
Qty.
200
Order No.
1897570000
Type
40
1038850000
ESG 8/13.5/43.3 SAI SDR
l
l
l
l
ESG 8/11 MC SDR
Qty.
1
Order No.
1038860000
m
l
Technical drawing / application
E.14
1366810000 – 2013/2014
ESG MultiCard – cross-manufacturer equipment identification
ESG 8/17
8 mm
ESG 8/17 L
8 mm
Device markers
ESG MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Telemecanique
8 mm
17 mm
Lumberg
8 mm
17 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG 8/17 MC NE WS
Qty.
200
Order No.
1674740000
Type
ESG 8/17 L MC NE WS
40
1674750000
ESG 8/17 L MC SDR
l
l
l
l
ESG 8/17 MC SDR
Qty.
200
Order No.
1890470000
40
1038870000
m
l
Technical drawing / application
1366810000 – 2013/2014
E.15
ESG MultiCard – cross-manufacturer equipment identification
ESG 8/17 SCHS
8 mm
ESG 8/17 SYS PRO
8 mm
Device markers
ESG MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Rail
8 mm
17 mm
AEG, ABB-Stotz
8 mm
17 mm
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG 8/17 SCHS MC NE WS
Qty.
200
Order No.
1720610000
Type
ESG 8/17 SYS PRO M WS
Qty.
200
Order No.
1755340000
40
1766640000
ESG 8/17 SYS PRO M SDR
40
1755350000
l
l
l
l
ESG 8/17 SCHS MC SDR
m
l
Technical drawing / application
E.16
1366810000 – 2013/2014
ESG MultiCard – cross-manufacturer equipment identification
ESG 8/19
8 mm
ESG 9/10
9 mm
Device markers
ESG MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
AEG
8 mm
19 mm
9 mm
10 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG 8/19 MC NE WS
Qty.
200
Order No.
1652220000
Type
ESG 9/10 MC NE WS
40
1652230000
ESG 9/10 MC SDR
l
l
l
l
ESG 8/19 MC SDR
Qty.
200
Order No.
1775910000
40
1038880000
m
l
Technical drawing / application
1366810000 – 2013/2014
E.17
ESG MultiCard – cross-manufacturer equipment identification
ESG 9/11
9 mm
ESG 9/17
9 mm
Device markers
ESG MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Self-adhesive
9 mm
11 mm
CLI TM sleeve
9 mm
17 mm
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
Type
Qty.
Order No.
Type
ESG 9/17 MC NE WS
Qty.
200
Order No.
1724760000
ESG 9/11 K MC NE WS
200
1857440000
ESG 9/17 K MC NE WS
ESG 9/17 K MC NE GE
200
200
1674760000
1753500000
40
1857450000
ESG 9/17 MC SDR
40
1770480000
m
l
l
l
l
m
l
ESG 9/11 K MC SDR
Technical drawing / application
E.18
1366810000 – 2013/2014
ESG MultiCard – cross-manufacturer equipment identification
ESG 9/20
9 mm
ESG 9/20 L
9 mm
Device markers
ESG MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Moeller, Siemens, WI SAI distributor
9 mm
20 mm
Lumberg
9 mm
20 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
l
Type
ESG 9/20 MC NE WS
ESG 9/20 MC NE GE
ESG 9/20 MC SDR
Qty.
200
200
Order No.
1609940000
1766160000
Type
ESG 9/20 L MC NE WS
ESG 9/20 L MC NE GE
40
1609950000
ESG 9/20 L MC SDR
Qty.
200
200
Order No.
1890460000
1010860000
40
1968140000
m
l
Technical drawing / application
1366810000 – 2013/2014
E.19
ESG MultiCard – cross-manufacturer equipment identification
ESG 9/20 O.F.
9 mm
ESG 9/20 Universal
9 mm
Device markers
ESG MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
TMC sleeve
9 mm
20 mm
Murr, Festo CPV/CPI
9 mm
20 mm
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG 9/20 O.F MC NE WS
Qty.
200
Order No.
1770500000
Type
ESG 9/20 UNI MC NE WS
40
1770510000
ESG 9/20 UNI MC SDR
l
l
l
l
ESG 9/20 O.F MC SDR
Qty.
200
Order No.
1856720000
40
1856730000
m
l
Technical drawing / application
E.20
1366810000 – 2013/2014
ESG MultiCard – cross-manufacturer equipment identification
ESG 9/6
9 mm
ESG 10/17
10 mm
Device markers
ESG MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
WI SAI AKTIV
9 mm
6 mm
Allen-Bradley, Festo MT
10 mm
17 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG 9/6 MC NE WS
Qty.
400
Order No.
1888360000
Type
ESG 10/17 MC NE WS
80
1038940000
ESG 10/17 MC SDR
l
l
l
l
ESG 9/6 MC SDR
Qty.
200
Order No.
1856700000
40
1856710000
m
l
Technical drawing / application
1366810000 – 2013/2014
E.21
ESG MultiCard – cross-manufacturer equipment identification
ESG X20 10/7
7 mm
ESG B&R X20
2.5 mm
Device markers
ESG MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
B&R X20 System
10 mm
7 mm
B&R X20 System
2.5 mm
10 mm
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG X20 10/7 MC NE WS
Qty.
240
Type
ESG X20 MC NE WS
Qty.
1120
Order No.
1001140001
l
l
l
l
Order No.
1026550000
ESG X20 10/7 MC NE BL
ESG X20 10/7 MC NE RT
ESG X20 10/7 MC NE OR
240
240
240
1026560000
1026570000
1026580000
ESG X20 MC NE BL
ESG X20 MC NE RT
ESG X20 MC NE OR
1120
1120
1120
1001150001
1001170001
1001160001
48
1038930000
ESG X20 MC SDR
224
1038890000
ESG X20 10/7 MC SDR
m
l
Technical drawing / application
E.22
1366810000 – 2013/2014
ESG MultiCard – cross-manufacturer equipment identification
ESG-M 8/20
8 mm
ESG-M 9/17
9 mm
Device markers
ESG MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Murr Cube67 & MVK MP
8 mm
20 mm
Murr MVP Module
9 mm
17 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
red
orange
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
MultiCard Blank, self adhesive, custom printing
to customer specification
m
Type
ESG-M 8/20 MC NE WS
Qty.
200
Order No.
1027290000
Type
ESG-M 9/17 MC NE WS
40
1038910000
ESG-M 9/17 MC SDR
l
l
l
l
ESG-M 8/20 MC SDR
Qty.
200
Order No.
1027280000
40
1038920000
m
l
Technical drawing / application
1366810000 – 2013/2014
E.23
Device markers
SM MultiCard – marker system for control and signalling devices
SM – SwitchMark MultiCard
Exemplary functional marking for control and signalling devices
Equipment-specific labelling for safe control
To avoid incorrect operation, clear identification is essential
when controlling the functions of control and signalling
devices. Designed specifically to meet this need, the
SwitchMark system covers the entire range of requirements
of the respective application areas. The signs are snapped
into the holders designed for the different manufacturers’
control and signalling devices or fastened in place using the
adhesive tape that has been applied previously. Alternatively,
choose a set containing both holders and signs. Even for the
many variations in cam-switch positions, the SwitchMark
range contains the appropriately shaped signs for accurate
labelling. Combined with Weidmüller’s marking systems,
you can print the signs independently and as required for the
application in an individual layout – including all the relevant
additional information.
E
SwitchMark – the benefits to you
•Practical: signs for various device manufacturers or
holders with shields from Weidmüller in a set
• Easy to install: glue or snap in place
•Individual: application-precise in terms of number and
labelling
•Cost efficient: no need to store standard signs
PrintJet ADVANCED
Plotter MCP Plus
Plotter MCP Basic
Holders and signs are available in sets in the most common
sizes and versions for control and signalling devices from
Siemens (type 35B) or ABB (type ONFB72).
Technical data
Material
UL 94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Polyamide 66, halogen-free
V2
–40 °C
100 °C
You can use the SwitchMark system-solution to cover a
variety of cam controllers from various manufacturers.
Ordering data
Colour
Special printing
Possible printing systems
Not printable with
E.24
International colour code colours, not contained in the range, are available
on request.
Minimum order quantity: 48 Qty.
Specify special printing and colours, per Excel file or using the
M-Print® PRO software.
PrintJet ADVANCED, PrintJet PRO, PrintJet, Plotter MCP Plus,
Plotter MCP Basic
SMark Laser with self-adhesive markers
1366810000 – 2013/2014
SM MultiCard – marker system for control and signalling devices
SM 18/9.5
18 mm
SM 19/42
42 mm
Device markers
SwitchMark MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...60 °C
Polyamide 66
V-2
-40 °C...60 °C
Application/manufacturer
Width
Length
Self-adhesive
18 mm
9.5 mm
Self-adhesive
42 mm
19 mm
E
Ordering data
MultiCard Blank
white
yellow
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
blue
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
Type
Qty.
Order No.
Type
Qty.
Order No.
SM 18/9.5 K MC NE WS
SM 18/9.5 K MC NE GE
200
200
1248580000
1248590000
SM 19/42 K MC NE WS
SM 19/42 K MC NE GE
40
40
1248620000
1248630000
SM 18/9.5 K MC NE GR
200
1248610000
SM 19/42 K MC NE GR
40
1248640000
40
1248550000
SM 19/42 K MC SDR
8
1248560000
Order No.
Type
m
l
l
l
m
l
l
l
l
l
SM 18/9.5 K MC SDR
Accessories
Protective film
Markers
Type
Qty.
Qty.
Order No.
SwitchMark holder
Technical drawing / application
1366810000 – 2013/2014
E.25
SM MultiCard – marker system for control and signalling devices
SM 22/22
22 mm
SM 27/8
27 mm
Device markers
SwitchMark MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyester film
HB
-20 °C...80 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
22 mm
22 mm
Self-adhesive
27 mm
8 mm
Ordering data
MultiCard Blank
white
yellow
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
blue
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
Type
Qty.
Order No.
m
l
l
l
m
l
l
l
l
l
Type
SM 27/8 MC NE WS
SM 27/8 MC NE GE
SM 27/8 MC NE GR
Qty.
80
80
80
Order No.
1699820000
1131870000
1079470000
SM 27/8 MC SDR
16
1699830000
SM 22/22 K MC NE WS
SM 22/22 K MC NE GE
80
80
1877570000
1131830000
SM 27/8 K MC NE WS
SM 27/8 K MC NE GE
80
80
1812630000
1131820000
SM 22/22 K MC NE GR
80
1014650000
SM 27/8 K MC NE GR
80
1079480000
SM 22/22 K MC NE SI
80
1877590000
SM 27/8 K MC NE SI
80
1771930000
SM 22/22 K MC SDR
16
1877580000
SM 27/8 K SONDERDRUCK
16
1713690000
Qty.
10
Order No.
1880720000
Type
ETO SM 27/8
Qty.
10
Order No.
1720570000
Accessories
Protective film
Markers
Type
ETO SM 22/22 TRANSPAR.
SwitchMark holder
Technical drawing / application
E.26
1366810000 – 2013/2014
SM MultiCard – marker system for control and signalling devices
SM 27/12.5
27 mm
SM 27/18
27 mm
Device markers
SwitchMark MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
27 mm
42 mm
SM holder, Self-adhesive
27 mm
18 mm
E
Ordering data
MultiCard Blank
white
yellow
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
blue
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
m
l
l
l
l
l
Qty.
80
80
80
Order No.
1699840000
1131860000
1079490000
Type
SM 27/18 MC NE WS
SM 27/18 MC NE GE
SM 27/18 MC NE GR
SM 27/18 MC NE RT
Qty.
80
80
80
80
Order No.
1699860000
1131850000
1014640000
1906110000
SM 27/12.5 SDR
16
1699850000
SM 27/18 MC SDR
16
1699870000
SM 27/12.5 K MC WS NE
SM 27/12.5 K MC NE GE
80
80
1699880000
1131810000
1713720000
SM 27/18 K MC NE WS
SM 27/18 K MC NE GE
SM 27/18 K MC NE BL
SM 27/18 K MC NE GR
SM 27/18 K MC NE RT
SM 27/18 K MC NE SI
80
80
80
80
80
80
1707270000
1915340000
1915330000
1073340000
1906120000
1713760000
SM 27/12.5 K MC NE GR
80
1027830000
SM 27/12.5 K MC NE SI
80
SM 27/12.5 K MC SDR
16
1699890000
SM 27/18 K MC SDR
16
1707280000
Type
ETO SM 27/12,5
Qty.
10
Order No.
1720580000
Type
ETO SM 27/18 TRANSPAR.
Qty.
10
Order No.
1720590002
SM-H 27/12.5 SW
25
1716640000
SM-H 27/18 SW
25
1716630000
Type
SM 27/12.5 MC NE WS
SM 27/12.5 MC NE GE
SM 27/12.5 MC NE GR
Accessories
Protective film
Markers
SwitchMark holder
Technical drawing / application
1366810000 – 2013/2014
E.27
SM MultiCard – marker system for control and signalling devices
SM 27/27
27 mm
SM 37.5/17
37.5 mm
Device markers
SwitchMark MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyester film
HB
-20 °C...80 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
27 mm
27 mm
Self-adhesive
37.5 mm
17 mm
Ordering data
MultiCard Blank
white
yellow
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
blue
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
m
l
l
l
l
l
Qty.
60
60
60
Order No.
1773220000
1131840000
1079510000
Type
SM 37.5/17 MC NE WS
Qty.
40
Order No.
1336710000
SM 37.5/17 MC NE GR
40
1336720000
SM 27/27 MC SDR
12
1773240000
SM 37.5/17 MC SDR
8
1336680000
SM 27/27 K MC NE WS
SM 27/27 K MC NE GE
60
60
1783000000
1131800000
SM 27/27 K MC NE GR
60
1079520000
SM 27/27 K MC NE SI
60
1782990000
SM 27/27 K MC SDR
12
1783010000
Type
ETO SM 27/27
Qty.
10
Order No.
1805840000
SM-H 27/27 SW
10
1782710000
Type
SM 27/27 MC NE WS
SM 27/27 MC NE GE
SM 27/27 MC NE GR
Accessories
Protective film
Markers
SwitchMark holder
Type
Qty.
Order No.
Technical drawing / application
E.28
1366810000 – 2013/2014
SM MultiCard – marker system for control and signalling devices
SM 42/42-30
42 mm
SM 44/44-21
44 mm
Device markers
SwitchMark MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
for cam switches, Type T0
42 mm
42 mm
for cam switches, ABB, Type ON and OL40
44 mm
44 mm
E
Ordering data
MultiCard Blank
white
yellow
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
blue
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
Type
Qty.
Order No.
m
l
l
l
Type
SM 44/44-21 MC NE WS
SM 44/44-21 MC NE GE
SM 44/44-21 MC NE GR
SM 44/44-21 MC SDR
m
l
l
l
l
l
SM 42/42-30 K MC NE WS
SM 42/42-30 K MC NE GE
20
20
1323530000
1323540000
SM 42/42-30 K MC NE GR
20
1323550000
4
1323620000
SM 42/42-30 K MC SDR
Qty.
20
20
20
Order No.
1323570000
1323580000
1323600000
4
1323640000
Accessories
Protective film
Markers
Type
Qty.
Order No.
Type
Qty.
Order No.
SwitchMark holder
Technical drawing / application
1366810000 – 2013/2014
E.29
SM MultiCard – marker system for control and signalling devices
SM 45/45-24
45 mm
SM 46/46-30
46 mm
Device markers
SwitchMark MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
for cam switches, Eaton Moeller
45 mm
45 mm
46 mm
46 mm
Ordering data
MultiCard Blank
white
yellow
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
blue
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
Type
SM 45/45-24 MC NE WS
SM 45/45-24 MC NE GE
SM 45/45-24 MC NE GR
SM 45/45-24 MC SDR
Qty.
20
20
20
Order No.
1248650000
1248660000
1248670000
Type
SM 46/46-30 MC NE WS
SM 46/46-30 MC NE GE
SM 46/46-30 MC NE GR
4
1248570000
SM 46/46-30 MC SDR
Order No.
Type
Qty.
20
20
20
Order No.
1323500000
1323510000
1323520000
4
1323610000
m
l
l
l
l
l
Accessories
Protective film
Markers
Type
Qty.
Qty.
Order No.
SwitchMark holder
Technical drawing / application
E.30
1366810000 – 2013/2014
SM MultiCard – marker system for control and signalling devices
SM DIA 60-22
60 mm
Device markers
SwitchMark MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
ø 60 - 22 mm, Siemens 3 SB, Eaton Moeller M22-PV
60 mm
60 mm
E
Ordering data
MultiCard Blank
white
yellow
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
blue
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
Type
Qty.
Order No.
m
l
l
l
m
l
l
l
l
l
SM DIA 60-22 K MC NE GE
SM DIA 60-22 MC SDR
10
1323750000
2
1323740000
Accessories
Protective film
Markers
Type
Qty.
Order No.
SwitchMark holder
Technical drawing / application
1366810000 – 2013/2014
E.31
Device markers
CC MultiCard – identification of electrical installations and switchgear
CC – ClipCard MultiCard
The alternative to engraved device markers
Brilliant printing results without of high costs
With its crisply printed labelling area in various sizes,
the multi-functional ClipCard is on an equal footing with
engraved device markers. Mounted at eye-level,
it is the ideal alternative for marking electrical installations
and switching facilities, and uses the full range of
attachment types.
From simple device identification through to the labelling of
pipework, valves, motors or lamps in accordance with
DIN V VDE V 0108 (part 100), or creating nameplates with a
colour firm logo, you cover the entire marking requirements
reliably and cost-efficiently with the ClipCard range.
E
PrintJet ADVANCED
Plotter MCP Plus
Plotter MCP Basic
ClipCard – the benefits to you
•Economic: highly resistant labelling in engraved quality
• Easy to install: all types of attachment in one format
•Comprehensive: a wide range of applications thanks to
the variety of sizes and design options
The signs are pre-drilled or have double-sided adhesive
tape attached giving you tremendous time savings during
installation.
Technical data
Material
Flammability classification to UL 94
Temperature range
Temperature range
Approved air humidity
Polyamide 66, halogen-free
V2
–40 °C … 100 °C
–40 °C … 60 °C (self-adhesive)
Max. 60 %, only for screwable markers
There are matching holders for additional mounting
possibilities: snap-locking or using cable ties.
Ordering data
Ordering data
Colour
Special printing
Possible printing systems
Not printable with
E.32
International colour code colours, not contained in the range, are available
on request.
Minimum order quantity: 48 Qty.
Specify special printing and colours, per Excel file or using the
M-Print® PRO software.
PrintJet ADVANCED, PrintJet PRO, PrintJet, Plotter MCP Plus,
Plotter MCP Basic
SMark Laser with self-adhesive markers
Holder
CC-H 15/17
CC-H 15/27
CC-H 15/49
CC-H 15/60
CC-H 30/60
LogiMark holder
LogiMark holder ES
LogiMark holder ES
LogiMark holder ES
LogiMark holder
Length
90 mm
90 mm
90 mm
90 mm
Width
58 mm
58 mm
58 mm
58 mm
Material colour
black
black
black
black
black
beige
grey
black
black
Qty.
75
45
25
25
10
Order No.
1790430000
1790410000
1790420000
1878910000
1934430000
20
20
20
20
1631640003
1631640002
1631640001
1603290000
1366810000 – 2013/2014
CC MultiCard – identification of electrical installations and switchgear
CC 15/17
17 mm
CC 15/27
27 mm
Device markers
ClipCard MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...60 °C
Application/manufacturer
Width
Length
Holder CC-H 15/17, Self-adhesive
17 mm
15 mm
Holder CC-H 15/27, Self-adhesive
27 mm
15 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
green
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
l
l
m
l
l
l
l
Type
CC 15/17 MC NE WS
CC 15/17 MC NE GE
Qty.
80
80
Order No.
1876570000
1131930000
Type
CC 15/27 MC NE WS
CC 15/27 MC NE GE
Qty.
80
80
Order No.
1876770000
1131940000
CC 15/17 MC NE GR
80
1079530000
CC 15/27 MC NE GR
80
1079550000
CC 15/17 MC SDR
16
1876620000
CC 15/27 MC SDR
16
1876630000
CC 15/17 K MC NE WS
CC 15/17 K MC NE GE
CC 15/17 K MC NE GR
CC 15/17 K MC NE RT
CC 15/17 K MC NE SI
80
80
80
80
80
1876590000
1131920000
1079540000
1288320000
1876580000
CC 15/27 K MC NE WS
CC 15/27 K MC NE GE
CC 15/27 K MC NE GR
CC 15/27 K MC NE RT
CC 15/27 K MC NE SI
80
80
80
80
80
1876640000
1131910000
1079560000
1288330000
1876780000
CC 15/17 K MC SDR
16
1876600000
CC 15/27 K MC SDR
16
1876750000
Qty.
10
80
Order No.
1880850000
1888310000
Type
ETO CC 15/27 TRANSPAR.
STR CC 15/27 TRANSPARENT
Qty.
10
80
Order No.
1880810000
1888290000
Accessories
Type
ETO CC 15/17 TRANSPAR.
STR CC 15/17 TRANSPARENT
Technical drawing / application
1366810000 – 2013/2014
E.33
CC MultiCard – identification of electrical installations and switchgear
CC 15/45
45 mm
CC 15/49
49 mm
Device markers
ClipCard MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...60 °C
Polyamide 66
V-2
-40 °C...60 °C
Application/manufacturer
Width
Length
Rail, Self-adhesive
45 mm
15 mm
Holder CC-H 15/49, Self-adhesive
49 mm
15 mm
Ordering data
MultiCard Blank
white
yellow
blue
green
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
l
l
Type
CC 15/45 MC NE WS
CC 15/45 MC NE GE
Qty.
40
40
Order No.
1111210000
1111230000
Type
CC 15/49 MC NE WS
CC 15/49 MC NE GE
Qty.
40
40
Order No.
1877260000
1076970000
CC 15/45 MC NE GR
40
1111240000
CC 15/49 MC NE GR
40
1079570000
8
1111190000
CC 15/49 MC SDR
8
1877200000
40
40
40
1111250000
1111260000
1111270000
CC 15/49 K MC NE WS
CC 15/49 K MC NE GE
CC 15/49 K MC NE GR
CC 15/49 K MC NE RT
CC 15/49 K MC NE SI
40
40
40
40
40
1877220000
1131970000
1079580000
1288380000
1877270000
8
1111200000
CC 15/49 K MC SDR
8
1877230000
Order No.
Type
ETO CC 15/49 TRANSPAR.
STR CC 15/49 TRANSPARENT
Qty.
10
40
Order No.
1880830000
1888300000
CC 15/45 MC SDR
m
l
l
l
l
CC 15/45 K MC NE WS
CC 15/45 K MC NE GE
CC 15/45 K MC NE GR
CC 15/45 K MC SDR
Accessories
Type
Qty.
Technical drawing / application
E.34
1366810000 – 2013/2014
CC MultiCard – identification of electrical installations and switchgear
CC 15/60
60 mm
CC 15/60 O4MM
60 mm
Device markers
ClipCard MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
60 mm
15 mm
With hole
60 mm
15 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
green
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
l
l
Type
CC 15/60 MC NE WS
CC 15/60 MC NE GE
Qty.
40
40
Order No.
1877350000
1131960000
Type
CC 15/60 O4MM MC NE WS
Qty.
40
Order No.
1057580000
CC 15/60 MC NE GR
40
1072640000
CC 15/60 O4MM MC NE GR
40
1304060000
8
1877300000
CC 15/60 O4MM MC SDR
8
1060010000
40
40
40
40
40
1877310000
1131890000
1072650000
1288340000
1877360000
8
1877320000
Qty.
10
40
Order No.
1880840000
1888280000
CC 15/60 MC SDR
m
l
l
l
l
CC 15/60 K MC NE WS
CC 15/60 K MC NE GE
CC 15/60 K MC NE GR
CC 15/60 K MC NE RT
CC 15/60 K MC NE SI
CC 15/60 K MC SDR
Accessories
Type
ETO CC 15/60 TRANSPAR.
STR CC 15/60 TRANSPARENT
Type
Qty.
Order No.
Technical drawing / application
1366810000 – 2013/2014
E.35
CC MultiCard – identification of electrical installations and switchgear
CC 30/60
60 mm
CC 30/60 O4MM
60 mm
Device markers
ClipCard MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
60 mm
30 mm
With hole
60 mm
30 mm
Ordering data
MultiCard Blank
white
yellow
blue
green
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
l
l
Type
CC 30/60 MC NE WS
CC 30/60 MC NE GE
Qty.
30
30
Order No.
1934420000
1009320000
CC 30/60 MC NE GR
30
1072670000
6
1934410000
30
30
30
30
30
1934390000
1078320000
1072680000
1085430000
1934330000
6
1934370000
Qty.
10
10
Order No.
1934440000
1934450000
CC 30/60 MC SDR
m
l
l
l
l
CC 30/60 K MC NE WS
CC 30/60 K MC NE GE
CC 30/60 K MC NE GR
CC 30/60 K MC NE RT
CC 30/60 K MC NE SI
CC 30/60 K MC SDR
Type
CC 30/60 O4MM MC NE WS
CC 30/60 O4MM MC NE GE
CC 30/60 O4MM MC NE BL
CC 30/60 O4MM MC NE GN
CC 30/60 O4MM MC NE GR
CC 30/60 O4MM MC NE RT
CC 30/60 O4MM MC SDR
Qty.
30
30
30
30
30
30
Order No.
1083150000
1083160000
1158840000
1158820000
1083170000
1158830000
6
1083190000
Accessories
Type
ETO CC 30/60 TRANSPAR.
STR CC 30/60 TRANSPARENT
Type
Qty.
Order No.
Technical drawing / application
E.36
1366810000 – 2013/2014
CC MultiCard – identification of electrical installations and switchgear
CC 85/54
54 mm
CC 85/54 O4MM
54 mm
Device markers
ClipCard MultiCard
Technical data
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...60 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
Holder Logimark-H, Self-adhesive
54 mm
85 mm
With hole
54 mm
85 mm
E
Ordering data
MultiCard Blank
white
yellow
blue
green
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
l
l
m
l
l
l
l
Type
CC 85/54 MC NE WS
CC 85/54 MC NE GE
Qty.
10
10
Order No.
1138400000
1138410000
Type
CC 85/54 O4MM MC NE WS
CC 85/54 O4MM MC NE GE
Qty.
10
10
Order No.
1248480000
1248490000
CC 85/54 MC NE GR
10
1138420000
CC 85/54 O4MM MC NE GR
10
1248510000
CC 85/54 MC SDR
10
1138460000
CC 85/54 O4MM MC SDR
2
1248460000
CC 85/54 K MC NE WS
CC 85/54 K MC NE GE
CC 85/54 K MC NE GR
CC 85/54 K MC NE RT
10
10
10
10
1138430000
1138440000
1138450000
1288390000
CC 85/54 K MC SDR
10
1138470000
Accessories
Type
Qty.
Order No.
Type
Qty.
Order No.
Technical drawing / application
1366810000 – 2013/2014
E.37
CC MultiCard – identification of electrical installations and switchgear
CC DIA 30/3.5
30 mm
CC DIA 30/4.2
30 mm
Device markers
ClipCard MultiCard
Technical data
E
Material
UL 94 flammability rating
Ambient temperature (operational)
Polyamide 66
V-2
-40 °C...100 °C
Polyamide 66
V-2
-40 °C...100 °C
Application/manufacturer
Width
Length
ø 30 mm; with 3.5 mm mounting hole
30 mm
30 mm
ø 30 mm; with 4.2 mm mounting hole
30 mm
30 mm
Ordering data
MultiCard Blank
white
yellow
blue
green
grey
red
MultiCard custom printing
to customer specification
MultiCard Blank, self adhesive
white
yellow
grey
red
silver
MultiCard Blank, self adhesive, custom printing
to customer specification
m
l
l
l
l
l
Type
CC DIA 30/3.5 MC NE WS
CC DIA 30/3.5 MC NE GE
Qty.
60
60
Order No.
1266120000
1266130000
Type
CC DIA 30/4.2 MC NE WS
CC DIA 30/4.2 MC NE GE
Qty.
60
60
Order No.
1248520000
1248530000
CC DIA 30/3.5 MC NE GR
60
1266140000
CC DIA 30/4.2 MC NE GR
60
1248540000
CC DIA 30/3.5 SDR
12
1266150000
CC DIA 30/4.2 MC SDR
12
1248470000
Order No.
Type
m
l
l
l
l
Accessories
Type
Qty.
Qty.
Order No.
Technical drawing / application
E.38
1366810000 – 2013/2014
Device markers
E
1366810000 – 2013/2014
E.39
Device markers
Tag rails – identification for side-by-side devices
Tag rails
Boundless freedom of design
High-contrast identification for side-by-side devices
The SCHS shielding rail can be fitted to almost any device,
either glued or screwed. It is the preferred choice for high
contrast labelling, especially for devices placed side by side.
Some types of sturdy PVC rails have markers that can be
clicked and locked into position. You therefore benefit from
the large variety and the compatibility of the tag rails from
our MultiCard product line. Take advantage of our innovative
labelling systems, which is an alternative to engraving.
Tag rails – the benefi ts to you
E
•• Additional information to the equipment is easy to
correlate
•• Depending upon the application, the length can be
increased because of the metre lengths that are delivered
The SCHS shielding rail can be fitted to almost any device,
either glued or screwed, which makes it usable almost
anywhere.
With the normal width size of 17.5 mm, as is the case with
circuit breakers, the tag rail SchS2 is recommended along
with the device marker ESG 8/17S.
Technical data
Material
Flammability classification to UL 94
Temp., min.
Temp., max.
E.40
Hard PVC
V0
-30 °C
70 °C
1366810000 – 2013/2014
Tag rail ClipCard
Ordering data
Type
CC-Rail 1000
CC-Rail 1000 transparent
Tag rail ESG, DEK, WS
1366810000 – 2013/2014
Ordering data
Type
SCHS 1 black
SCHS 2 self-adhesive black
SCHS 2 black
SCHS 3 self-adhesive black
SCHS 4 self-adhesive grey
STR SCHS 1 transparent
ESO SCHS 1 white
Application
Qty.
CC 15/17 MC; CC 15/27 MC; CC 15/49 MC; CC 15/60 MC
1
1
Application
ESO/protection strip
ESG 8/17 SCH ; DEK ; WS
ESG 8/17 SCH ; DEK ; WS
ESG 7/20
ESG 7/20
Width/Length
17 mm/1000 mm
8 mm/1000 mm
8 mm/1000 mm
10 mm/1000 mm
10 mm/1000 mm
12.5 mm/500 mm
12.5 mm/500 mm
black
Order No.
1790150000
Qty.
1
1
1
1
1
1
1
transparent
Order No.
Device markers
Tag rails – identification for side-by-side devices
1790160000
Order No.
0138900000
1720600000
0337400000
1753480000
1753460000
0139200000
0139000000
E
E.41
Device markers
MetalliCard – aluminium and stainless steel markers
Metal markers
A highly resistant and co-ordinated labelling system
Up until recently, ovens or similar equipment were required for labelling metal
markers. With our new MetalliCard, we are now able to offer an innovative
customised labelling system that allows you to print on aluminium or stainless
steel markers, as well as our standard MultiCard plastic markers. This is an
extremely versatile solution for labelling in the electrical cabinet: with just one
printer, one software program and one type of ink. You no longer need to hire an
external agency for expensive and time-consuming engraving or productions.
This complete system is very customisable – our M-Print® PRO software can be
used to create your custom marker layouts. You save an enormous
amount of time with the smooth data transfer from your CAE system.
E
Metal marking as standard
You can use the PrintJet ADVANCED to print
both MultiCard and MetalliCard formats. This
offers you maximum scope of use, flexibility and
independence from external providers.
High-quality colour printing
Colour graphics, characters and logos can
be created and customised. The PrintJet
ADVANCED outstanding colour printing is
a reliable, high-quality method for labelling
facility components.
E.42
1366810000 – 2013/2014
Versatile installation
These versatile metal markers can be attached
using rivets, glue, stainless-steel cable ties or
brackets.
Device markers
MetalliCard – aluminium and stainless steel markers
E
Various sizes
Rectangular markers are available from
27x18 mm to 85x54 mm. Circular
markers (diameter of 30 mm) and
stainless-steel cable ties for labelling
cables are also included in the MetalliCard
product line.
Very resistant
The MetalliCard signs are designed with
mechanical specifications that meet the
most exacting requirements – including high
temperatures, severe climate fluctuations, UV
radiation and other extreme environmental
conditions.
Your choice of materials
Specially coated aluminium is the most
affordable solution and features an
outstanding quality print image. Stainless
steel provides excellent resistance when
used in processing facilities and chemical
industry applications.
1366810000 – 2013/2014
E.43
Device markers
MetalliCard – aluminium and stainless steel markers
MetalliCard
The professional system for every standard
Superior components in a comprehensive product line
Our labelling system allows you to label with precision and
speed – without losing track. Our completely matched line of
materials, sizes and mounting options cover solutions for all
of your particular operational needs.
The systematic use of our PrintJet ADVANCED, M-Print®
PRO and update kit enables you to custom design and
process facility labelling for all of your system components.
The result is a consistently outstanding marking system.
PrintJet ADVANCED
The benefits for you
E
• Quality: durable materials for extreme conditions
•Customised: perfectly matched system components
provide the best variety
• Efficient: tailor-made solutions from a single source
•Professional: in-house control of all marking processes
Precise colour printing across multiple markers of the same
type – thanks to an inlay-secured printing process.
Technical data
Marker material
Temperature range
Thick
Primer
Update kit
Service kit
Possible printing systems
E.44
Anodised aluminium (AL) or stainless steel 1.4301 (ST)
-55 °C ... +130 °C
0.5 mm
100 impregnated cloths and hermetically sealed
CD with firmware and configuration data for MetalliCard, programming
device, USB cable, multilingual manual, inlay CC-M 85/54, 10 pieces
of CC-M 85/54 AL
The universal inlay is designed to accept eight different
marker types and is particularly suitable for printing small
batch jobs. (CC-M 85/54, CC-M 27/18, CC-M 85/27, CC-M
30/60, CC-M 15/60, CC-M 15/45, CC-M DIA 30, SFX-M
11/60)
Available for PrintJet PROs, from delivery date July 2010, with serial
number 3653 (last 4 digits) and higher
Update Kit + : requires mechanical update on the PrintJet PRO. The
printer should be returned.
PrintJet PROs with serial number lower than 3653 (last 4 digits)
PrintJet ADVANCED, PrintJet PRO (with update kit)
1366810000 – 2013/2014
Markers
Ordering data
Type description
Type
CC-M 30/60 2x3 AL
CC-M 30/60 2x3 AL
CC-M 30/60 2x3 AL
CC-M 30/60 2x3 AL
CC-M 30/60 2x3 AL
CC-M 30/60 2x3 AL
CC-M 30/60 2x3 AL
CC-M 30/60 2x3 ST
Description
ClipCard
MetalliCard
30 mm wide
60 mm high
2 holes
3.3 mm hole diameter
Aluminium
Stainless steel
60 ±0.1
30 ±0.1
Type
CC-M 85/54 AL
CC-M 85/54 ST
CC-M 27/18 AL
CC-M 27/18 ST
CC-M 85/27 AL
CC-M 85/27 ST
CC-M 30/60 AL
CC-M 30/60 ST
CC-M 15/60 AL
CC-M 15/60 ST
CC-M 15/45 AL
CC-M 15/45 ST
CC-M 58/35 AL
CC-M 58/35 ST
CC-M 70/48 AL
CC-M 70/48 ST
CC-M DIA 30 AL
CC-M DIA 30 ST
SFX-M 11/60 AL
SFX-M 11/60 ST
SFX-M 11/60-5 AL
SFX-M 11/60-5 ST
CC-M 85/54 4X3 AL
CC-M 85/54 4X3 ST
CC-M 85/27 2X3 AL
CC-M 85/27 2X3 ST
CC-M 30/60 2X3 AL
CC-M 30/60 2X3 ST
CC-M 15/60 2X3 AL
CC-M 15/60 2X3 ST
CC-M 15/45 2X3 AL
CC-M 15/45 2X3 ST
CC-M 58/35 2X3 AL
CC-M 58/35 2X3 ST
CC-M 70/48 2X3 AL
CC-M 70/48 2X3 ST
CC-M 18/52 2X3 ST
Adhesive film
Ordering data
Inlays
Ordering data
Type
DKB CC 85/54
DKB CC 85/27
DKB CC 30/60
DKB CC 27/18
DKB CC 15/60
DKB CC 15/45
DKB CC DIA 30
Type
INLAY CC-M 85/54
INLAY CC-M 27/18
INLAY CC-M 85/27
INLAY CC-M 30/60
INLAY CC-M 15/60
INLAY CC-M 15/45
INLAY CC-M 58/35
INLAY CC-M 70/48
INLAY CC-M 18/52
INLAY CC-M DIA 30
INLAY SFX-M 11/60
INLAY CC-M UNIVERSAL
Accessories
1366810000 – 2013/2014
Ordering data
Type
UPDATE-KIT PJPRO METAL
Primer CC-M
Size
85 x 54 mm
85 x 54 mm
27 x 18 mm
27 x 18 mm
85 x 27 mm
85 x 27 mm
30 x 60 mm
30 x 60 mm
15 x 60 mm
15 x 60 mm
15 x 45 mm
15 x 45 mm
58 x 35 mm
58 x 35 mm
70 x 48 mm
70 x 48 mm
ø 30 mm
ø 30 mm
11 x 60 mm
11 x 60 mm
11 x 60 mm
11 x 60 mm
85 x 54 mm
85 x 54 mm
85 x 27 mm
85 x 27 mm
30 x 60 mm
30 x 60 mm
15 x 60 mm
15 x 60 mm
15 x 45 mm
15 x 45 mm
58 x 35 mm
58 x 35 mm
70 x 48 mm
70 x 48 mm
18 x 52 mm
Qty.
40
40
200
200
80
80
100
100
200
200
200
200
100
100
40
40
200
200
50
50
50
50
40
40
80
80
100
100
200
200
200
200
100
100
40
40
200
Order No.
1327600000
1327620000
1327630000
1327640000
1327650000
1327670000
1327680000
1327690000
1327700000
1327720000
1327730000
1327740000
1415750000
1415730000
1415770000
1415740000
1327750000
1327770000
1327780000
1327790000
1422560000
1422570000
1327800000
1327820000
1327830000
1327840000
1327850000
1327870000
1327880000
1327890000
1327900000
1327920000
1415710000
1415670000
1415720000
1415680000
1390400000
Suitable for
CC-M 85/54
CC-M 85/27
CC-M 30/60
CC-M 27/18
CC-M 15/60
CC-M 15/45
CC-M DIA 30
Qty.
100
100
100
320
160
240
200
Order No.
1175850000
1226620000
1341130000
1341140000
1341150000
1341170000
1341180000
Suitable for
CC-M 85/54
CC-M 27/18
CC-M 85/27
CC-M 30/60
CC-M 15/60
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
Order No.
1341030000
1341040000
1341050000
1341070000
1341080000
1341090000
1415950000
1415940000
1390430000
1341100000
1341110000
1341120000
Qty.
1
1
Order No.
1344850000
1341200000
CC-M 15/45
CC-M 58/35
CC-M 70/48
CC-M 18/52
CC-M DIA 30
SFX-M 11/60
Universal
Holes
4.2 mm (single)
4.2 mm (single)
3.3 mm (quadruple)
3.3 mm (quadruple)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
3.3 mm (double)
Distance between holes
78 mm hor., 47 mm vert.
78 mm hor., 47 mm vert.
78 mm
78 mm
53 mm
53 mm
53 mm
53 mm
38 mm
38 mm
49.5 mm
49.5 mm
60 mm
60 mm
44 mm
Device markers
MetalliCard – aluminium and stainless steel markers
E
E.45
Device markers
Labels – self-adhesive markers for equipment identification
Labels
The right format for all equipment
High quality versions of resistant device markers
Our powerful self-adhesive labels for equipment identification and the use of
different materials for your application means that superior standards of labelling
are achieved. Provided with a powerful adhesive layer, the flexible fabric labels
are the ideal alternative for labelling round or angled objects. Polyester labels are
especially suitable for equipment labelling, identification plates or wire markers
due to their brightly printed image, whereby PLC labels are a perfectly adequate
alternative for the labelling of Siemens PLC control systems. It doesn‘t matter
which system you are labelling; in our portfolio you will always find what you want
in the application-indexed colour and of the most suitable and appropriate quality.
E
Labels – the benefits to you
•• Delivered on rolls, also in small amounts for thermal transfer printers
•• Alternative delivery as an A4 sheet
THM GEW
Textile labels are made of very flexible cotton
fabric. The high adhesion values enable flexible
application.
THM MT 30x
The ThermoMark labels offer brilliant printing
quality thanks to the thermal transfer technology
and optimises all identification requirements.
THM EL
THM EL are self-adhesive endless labels for
marking cable ducts and distribution boxes.
Available in widths of 15 mm, 24 mm and 38
mm on white reels.
E.46
THM ET S7
THM ET S7 are non-adhesive labels on rolls for
marking the Siemens Simatic 200S, S7-300
and S7-400 modules.
1366810000 – 2013/2014
THM PA
Paper labels are suitable for diverse
identification requirements and can be used as
goods labels, and to identify articles and objects.
Device markers
Labels – self-adhesive markers for equipment identification
THM PA ESO
THM PA ESO is an inlay marker for the WKM
transparent pouch, and tightly grips the wire
or cable. Fastening with cable ties enables
application on virtually all wire cross-sections.
THM WO
WriteOn cable markers are used to identify wires
and cables with an outside diameter of up to
39 mm. The transparent adhesive strip fixes and
protects the printing on the marker surface.
E
KSW
KSW marker strips are used for labelling
multipole plug-in connectors. They can be
printed individually by the user for any contact
spacing.
1366810000 – 2013/2014
E.47
Device markers
Labels – self-adhesive markers for equipment identification
E
E.48
Ordering data
LM MT 300
Type
Technical data
Material
Polyester, PVC-free
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
HB
-45
150
LM 105X105
LM 105X148
LM 12X6
LM 15X4.63
LM 15X6
LM 15X9
LM 17X9
LM 17x6
LM 18X6.5
LM 19.05x6.3
LM 202x12
LM 20X8
LM 210X148
LM 210X297
LM 25.4X12.7
LM 26.5/17.5
LM 26X10
LM 27/8
LM 27x18
LM 30X20
LM 40X6
LM 56X22
LM 60X36
LM 89X34
LM MT300 19X140
LM MT300 210X30
LM MT300 30X20
LM MT300 35/16
LM MT300 35/5.5
LM MT300 70X9
LM PA 20x8
Length
Width
Number
Qty.
105 mm
105 mm
12 mm
15 mm
15.2 mm
15 mm
17.8 mm
17 mm
18 mm
19.05 mm
202 mm
20.3 mm
210 mm
210 mm
25.4 mm
26.5 mm
26 mm
27 mm
27 mm
30 mm
40 mm
56 mm
60 mm
89 mm
19 mm
210 mm
30 mm
35 mm
35 mm
70 mm
20.3 mm
105 mm
148 mm
6 mm
4.63 mm
6 mm
9 mm
9 mm
6 mm
6.5 mm
6.3 mm
12 mm
8 mm
148 mm
297 mm
12.7 mm
17.5 mm
10 mm
8 mm
18 mm
20 mm
6 mm
22 mm
36 mm
34 mm
140 mm
30 mm
20 mm
16 mm
5.5 mm
9 mm
8 mm
4
4
322
627
484
186
341
10
290
10
22
264
2
1
147
10
156
198
90
78
90
36
21
16
10
9
78
85
245
90
264
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
White
Order No.
Yellow
Order No.
1724171044
1724171687
1882910000
1724141687
1686361687
1882890000
1724151687
1835820000
1749321687
1835830000
1915320000
1686381687
1724181687
1686441687
1686391687
1724141044
1686361044
1724151044
1749321044
1686381044
1724181044
1686441044
1686391044
1686401044
1724161044
1760461044
1686421044
1686431044
1003400000
1967640000
1140460000
1140470000
1686401687
1861510000
1686421687
1686431687
Silver
Order No.
1975160000
1724170001
1724140001
1686360001
1724150001
1749320001
1686380001
1724180001
1686440001
1686390001
1784340000
1686400001
1873810000
1724160001
1686420001
1686430001
1135260000
1724161687
1135250000
1874860000
1366810000 – 2013/2014
THM MT 30x - polyester labels
Ordering data
Type
Technical data
Material
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Form of supply
1366810000 – 2013/2014
Polyester film
HB
-40
150
THM MT30X 101/150
THM MT30X 101/48
THM MT30X 101/48
THM MT30X 101/74
THM MT30X 12/6
THM MT30X 15/4
THM MT30X 15/6
THM MT30X 17.5/17.5
THM MT30X 17/9
THM MT30X 18/6
THM MT30X 18/9
THM MT30X 20/100
THM MT30X 20/8
THM MT30X 25,40/50,8
THM MT30X 25.9/7.1
THM MT30X 25/12
THM MT30X 26/10
THM MT30X 30/20
THM MT30X 32/9
THM MT30X 32/9
THM MT30X 36/89
THM MT30X 38/19
THM MT30X 45/23
THM MT30X 65/35
THM MT30X 65/35
THM MT30x 100/90
THM MT30x 101/15
THM MT30x 101/7
THM MT30x 101/74
THM MT30x 15/5.08
THM MT30x 15/9
THM MT30x 16/7
THM MT30x 17/8
THM MT30x 17/9
THM MT30x 26.5/17.5
THM MT30x 30/52
THM MT30x 38.1/31.75
THM MT30x 38/17
THM MT30x 57/27
THM MT30x 8/8
THM MT30x 89/60
Length
Width
Number
Qty.
101 mm
101 mm
101 mm
101 mm
12 mm
15 mm
15 mm
17.5 mm
17 mm
18 mm
18 mm
20 mm
20 mm
25.4 mm
25.9 mm
25 mm
26 mm
30 mm
32 mm
32 mm
36 mm
38 mm
45 mm
65 mm
65 mm
100 mm
101 mm
101 mm
101 mm
15 mm
15 mm
16 mm
17 mm
17 mm
26.5 mm
30 mm
38.1 mm
38 mm
57 mm
8 mm
89 mm
150 mm
48 mm
48 mm
74 mm
6 mm
4 mm
6 mm
17.5 mm
9 mm
6 mm
9 mm
100 mm
8 mm
50.8 mm
7.1 mm
12 mm
10 mm
20 mm
9 mm
9 mm
89 mm
19 mm
23 mm
35 mm
35 mm
90 mm
150 mm
74 mm
74 mm
5.08 mm
9 mm
7 mm
8 mm
9 mm
17.5 mm
52 mm
31.75 mm
17 mm
27 mm
8 mm
60 mm
250
500
500
500
10000
10000
10000
5000
10000
10000
10000
1500
10000
2000
5000
10000
10000
6000
10000
6000
1000
2000
2000
1000
1000
500
250
500
500
10000
10000
10000
10000
10000
10000
2000
1000
4000
2000
10000
1000
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
White
Order No.
1751821044
1753231044
1753271044
1753251044
1085440000
1753241044
1891770000
1751751044
1751761044
1753261044
1751771044
1180910000
1751801044
1751811044
1751831044
Yellow
Order No.
1192760000
1192740000
1751821687
1192750000
1391390000
1072690000
1753231687
1856650000
1753271687
1753251687
1968130000
1011610000
1954070000
1751820001
1753230001
1338280000
1356500000
1753270001
1753250001
1753241687
1753240001
1378120000
1751751687
1751761687
1753261687
1356490000
1751750001
1751760001
1753260001
1751801687
1751811687
1751831687
1061810000
1058750000
Silver
Order No.
1964130000
1058740000
1852520000
1027620000
Device markers
Labels – self-adhesive markers for equipment identification
E
1751770001
1751800001
1751810001
1751830004
1751830001
1058770000
1778170000
1762960001
1770090000
1014680000
1862350000
1852540000
1003410000
E.49
Device markers
Labels – self-adhesive markers for equipment identification
THM GEW - Textile labels
Technical data
Material
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Form of supply
Vinyl-coated cotton fabric
HB
-29
150
Ordering data
Type
Length
Width
Number
Qty.
THM GEW 15/6
THM GEW 15/9
THM GEW 17/9
THM GEW 18/6
THM GEW 18/9
THM GEW 20/12
THM GEW 20/8
THM GEW 30/8
THM GEW 38/19
THM GEW 45/23
THM GEW FLAG 54/8
15 mm
15 mm
17 mm
18 mm
18 mm
20 mm
20 mm
30 mm
38 mm
45 mm
54 mm
6 mm
9 mm
9 mm
6 mm
9 mm
12 mm
8 mm
8 mm
19 mm
23 mm
8 mm
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
4000
1
1
1
1
1
1
1
1
1
1
1
White
Order No.
1059780000
1059800000
1059820000
1059840000
1059870000
1107350000
Yellow
Order No.
1059790000
1365630000
1059810000
1059830000
1059850000
1391380000
1059880000
1114450000
1335100000
1368740000
E
Ordering data
THM PA ESO
Technical data
Material
Paper
Type
Length
Width
Number
Qty.
THM PA ESO 7
27 mm
6.3 mm
2500
1
White
Order No.
1339570000
Yellow
Order No.
1339580000
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Form of supply
TABPACK FLAG
Technical data
Material
Ordering data
Acrylic-coated fibre
webbing
Type
Length
Width
Number
Qty.
TABPACK FLAG 54/8
54 mm
8 mm
4000
1
White
Order No.
1107340000
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Form of supply
E.50
1366810000 – 2013/2014
Ordering data
THM EL
Type
Technical data
Material
THM EL 15
THM EL 24
THM EL 38
THM EL 60
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Form of supply
Type
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Form of supply
Polyolefin, Polyesterfilm
HB
-40
93
ET S7 non-adhesive labels
THM ET S7 300-1
THM ET S7 300-2
THM ET S7 400
THM ET S7 50/12.5
THM ET S7 50/25
Number
Qty.
30 m
30 m
30 m
50 m
15 mm
24 mm
38 mm
60 mm
1
1
1
1
1
1
1
1
White
Order No.
1096170000
1105550000
1105560000
Silver
Order No.
1356520000
1391400000
E
Polycarbonate
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
-40
150
Length
Width
Number
Qty.
103 mm
103.8 mm
251 mm
50 mm
50 mm
22.6 mm
17.3 mm
13.5 mm
12.5 mm
25 mm
500
1000
500
2000
1250
1
1
1
1
1
Yellow
Order No.
1161770000
1161740000
1161720000
1161810000
1095590000
Turquoise
Order No.
1161750000
1161730000
1161710000
1161790000
1161780000
Yellow
Order No.
1804480000
Turquoise
Order No.
Ordering data
Type
Technical data
Material
1366810000 – 2013/2014
Width
Ordering data
THM ET S7
Technical data
Material
Length
Device markers
Labels – self-adhesive markers for equipment identification
ET S7 / 12/50 A4
ET S7-12/50 A4
ET S7-200-TU-A4-1
ET S7-200-TU-A4-1
ET S7-300 A4-1
ET S7-300 A4-2
ET S7-400 A4-1
ET S7-400 A4-2
ET S7-400 A4-3
Length
Width
Number
Qty.
50 mm
50 mm
203 mm
203 mm
100 mm
208 mm
251 mm
251 mm
251 mm
12 mm
12 mm
15.5 mm
12 mm
22.6 mm
17.3 mm
11.5 mm
11.5 mm
13.5 mm
84
84
80
80
16
22
14
14
14
10
10
10
10
10
10
10
10
10
1821020000
1847650000
1821040000
1821030000
1847640000
1865440000
1045500000
1045490000
1865450000
1865460000
1865470000
1865480000
1865490000
E.51
Device markers
Labels – self-adhesive markers for equipment identification
Ordering data
Symbol Pack
Technical data
Material
Adhesive
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Colour
Acrylic-coated fibre
webbing
Permanent acrylic
copolymer
Type
SYMBOL-P. 75X75X75 B/DR
SYMBOL-P. 50X50X50 B/DR
SYMBOL-P. 25X25X25 B/DR
Length
75 mm
50 mm
25 mm
Height
75 mm
50 mm
25 mm
Printing
Lightning flash in triangle
Lightning flash in triangle
Lightning flash in triangle
Number
20
40
40
Qty.
1
1
1
Order No.
1741110000
1741100000
1741090000
Number
20
20
20
20
20
20
Qty.
1
1
1
1
1
1
Order No.
1707350006
1707350005
1707350004
1707350003
1707350002
1707350001
Number
7
14
1
3
Qty.
10
10
10
10
Order No.
1700560001
1700550001
1700540001
1700530001
-45
80
Yellow
E
Ordering data
Service Pack
Technical data
Material
Adhesive
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Acrylic-coated fibre
webbing
Permanent acrylic
copolymer
Adhesive
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Colour
E.52
Length
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
Height
16 mm
16 mm
16 mm
16 mm
16 mm
16 mm
Printing
PE
GROUND
N
L3
L2
L1
-45
80
Marko Cards
Technical data
Material
Type
SERV-P. DIAM16 PE GE/GN
SERV-P.DIAM16ERDE GE/GN
SERV-P. DIAM16 N BL/WS
SERV-P. DIAM16 L3 SW/WS
SERV-P. DIAM16 L2 SW/WS
SERV-P. DIAM16 L1 SW/WS
Ordering data
Acrylic-coated fibre
webbing
Permanent acrylic
copolymer
Type
MARKO-C.200X200X200 B/DR
MARKO-C.100X100X100 B/DR
MARKO-C. 50X50X50 B/DR.
MARKO-C. 25X25X25 B/DR.
Length
200 mm
100 mm
50 mm
25 mm
Height
200 mm
100 mm
50 mm
25 mm
Printing
Lightning flash in triangle
Lightning flash in triangle
Lightning flash in triangle
Lightning flash in triangle
-29
80
Yellow
1366810000 – 2013/2014
Ordering data
PageTab
Technical data
Material
Adhesive
UL 94 flammability rating
Op. temp. range, min.
Op. temp. range, max.
Colour
Acrylic-coated fibre
webbing
Permanent acrylic
copolymer
-29
93
Yellow
Type
PAGETAB 60X35
PAGETAB 56X22
PAGETAB 38X11
PAGETAB 28X11
PAGETAB 20X8
PAGETAB 19X11
PAGETAB 15X9
Length
60 mm
56 mm
38 mm
28 mm
20 mm
19 mm
15 mm
Height
35 mm
22 mm
11 mm
11 mm
8 mm
11 mm
9 mm
Printing
Blank
Blank
Blank
Blank
Blank
Blank
Blank
Number
16
24
100
125
280
200
310
Qty.
25
25
25
25
25
25
25
Order No.
1686220000
1686210000
1686200000
1686190000
1686180000
1686170000
1686160000
Device markers
Labels – self-adhesive markers for equipment identification
E
1366810000 – 2013/2014
E.53
Device markers
KSW – PCB plug-in connector labels
KSW – Printed lables
KSW marker strips are used for labelling multipole plug-in
connectors. You can be printed individually by the user for
any contact spacing.
THM Plus S
• Wipe-proof labelling
• Strip width 2.5 mm and 4 mm
• Simply stick on – that’s all!
• Optimum adhesion
• PVC-free
E
Technical data
Material
Colour
Adhesive
Adhesion (strip width 25 mm) to DIN 51221
Minimum adhesion temperature
Behaviour in fire
Packaging unit
Strip/sheet
Possible printing systems
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
KSW 2.5 15/5.08
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
6 7 8 9 10
1630060001
1 unit = 1 sheet = 20 strips
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
Polyester with smooth surface
White
Acrylate base
On steel: 19 N, polypropylene: 12 N, Polyethylene: 10 N
+4 °C
Self-extinguishing after 15 seconds, non-drip
10 sheets (special print = 1 sheet)
20
THM Plus S
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
Order example:
Order No. 163006 0001 = version
KSW 2.5 15/5.08 1-15
20 x 1-15 print
5.08 mm spacing
15 pole
2.5 mm strip width
Strip width 2.5 mm
Pitch 5.08 mm
Special print: length = pitch x no. of poles
Please state contact spacing
E.54
1366810000 – 2013/2014
KSW 2.5 mm
Grid 3.5 mm
Ordering data
Type
KSW 2,5 8/3,5 W 1-8
KSW 2,5 14/3,5 1,3,5...27
KSW 2,5 14/3,5 2,4,6...28
KSW 2,5 16/3,5 1-16
KSW 2,5 24/3,5 1-24
KSW 2,5 24/3,5 25-48
Qty.
10
10
10
10
10
10
Order No.
1873620000
1849580000
1849590000
1652260001
1652250001
1652250025
Device markers
KSW – PCB plug-in connector labels
E
Ordering data
Grid 3.81 mm
Type
KSW 2,5 16/3,81 W 1-16
KSW 2,5 24/3,81 W 1-24
KSW 2,5 8/3,81 W 1-8
Qty.
10
10
10
Order No.
1873610000
1873600000
1873630000
Qty.
10
10
10
10
10
10
10
Order No.
1630070001
1630080001
1630080021
1630080041
1630080061
1713980001
1700660001
Ordering data
Grid 5.0 mm
1366810000 – 2013/2014
Type
KSW 2,5 16/5 1-16
KSW 2,5 20/5 1-20
KSW 2,5 20/5 21-40
KSW 2,5 20/5 41-60
KSW 2,5 20/5 61-80
KSW 2,5 24/5,00 W 1-24
KSW 2,5 8/5,00 W 1-8
E.55
Device markers
KSW – PCB plug-in connector labels
Ordering data
Grid 5.08 mm
Type
KSW 2,5 10/5,08 1-10
KSW 2,5 10/5,08 11-20
KSW 2,5 10/5,08 W 9-18
KSW 2,5 15/5,08 1-150
KSW 2,5 15/5,08 1-15FWZ
KSW 2,5 15/5,08 151-300
KSW 2,5 15/5,08 301-450
KSW 2,5 16/5,08 W 1-16
KSW 2,5 16/5,08 W 17-32
KSW 2,5 16/5,08 W 33-48
KSW 2,5 24/5,08 W 1-24
KSW 2,5 8/5,08 1-8
KSW 2,5 8/5,08 9-16
KSW 2,5 8/5,08 A-H
KSW 2,5 8/5,08 W 19-26
Qty.
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Order No.
1630020001
1630020011
1895950000
1630050001
1630060001
1630050151
1630050301
1713970001
1713970017
1713970033
1713990001
1630100001
1630100009
1630101021
1895960000
Qty.
10
Order No.
1873650000
Qty.
10
Order No.
1873640000
Qty.
10
10
100
Order No.
1676710001
1676710011
1676710021
E
Ordering data
Grid 7.5 mm
Type
KSW 2,5 8/7,5 W 1-8
Ordering data
Grid 7.62 mm
Type
KSW 2,5 8/7,62 W 1-8
Ordering data
Grid 9.0 mm
E.56
Type
KSW 2,5 10/9 W 1-10
KSW 2,5 10/9 W 11-20
KSW 2,5 10/9 W 21-30
1366810000 – 2013/2014
Ordering data
Blank
Type
KSW 2,5 < 50MM NEUTRAL
KSW 2,5 < 100MM NEUTRAL
KSW 2,5 < 150MM NEUTRAL
Qty.
1
10
10
Order No.
1629960000
1629980000
1630000000
Qty.
1
1
1
Order No.
1629920000
1629940000
1629900000
Qty.
10
10
10
10
Order No.
1630190001
1630150001
1630150017
1640410001
Qty.
10
10
10
10
10
10
Order No.
1630130001
1630130013
1700700001
1630170001
1700710001
1700670001
Device markers
KSW – PCB plug-in connector labels
Ordering data
Custom printing
KSW 4 mm
Grid 3.5 mm
Type
KSW 2,5 < 100MM SONDDR.
KSW 2,5 < 150MM SONDDR.
KSW 2.5 < 50MM SDR
E
Ordering data
Type
KSW 4 8/3,5 1-8
KSW 4 16/3,5 1-16
KSW 4 16/3,5 17-32
KSW 4 24/3,5 W 1-24
Ordering data
Grid 5.00 mm
1366810000 – 2013/2014
Type
KSW 4 12/5 1-12
KSW 4 12/5 W 13-24
KSW 4 16/5,00 W 1-16
KSW 4 18/5 1-18
KSW 4 24/5,00 W 1-24
KSW 4 8/5,00 W 1-8
E.57
Device markers
KSW – PCB plug-in connector labels
Ordering data
Grid 5.08 mm
E
Type
KSW 4 10/5,08 W 1-10
KSW 4 10/5,08 W 11-20
KSW 4 10/5,08 W 21-30
KSW 4 10/5,08 W 31-40
KSW 4 10/5,08 W 41-50
KSW 4 10/5,08 W 51-60
KSW 4 10/5,08 W 61-70
KSW 4 10/5,08 W 71-80
KSW 4 10/5,08 W 81-90
KSW 4 10/5,08 W 91-100
KSW 4 16/5,08 1-16
KSW 4 16/5,08 17-32
KSW 4 16/5,08 33-48
KSW 4 16/5,08 49-64
KSW 4 16/5,08 65-80
KSW 4 16/5,08 81-96
KSW 4 18/5,08 W 1-36
KSW 4 24/5,08 1-24
KSW 4 8/5,08 1-8
KSW 4 8/5,08 17-24
KSW 4 8/5,08 25-32
KSW 4 8/5,08 33-40
KSW 4 8/5,08 41-48
KSW 4 8/5,08 9-16
Qty.
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Order No.
1705820001
1705820011
1705820021
1705820031
1705820041
1705820051
1705820061
1705820071
1705820081
1705820091
1630160001
1630160017
1630160033
1630160049
1630160065
1630160081
1720530001
1630180001
1630200001
1630200017
1630200025
1630200033
1630200041
1630200009
Qty.
10
10
Order No.
1714070001
1670780001
Qty.
10
10
10
10
100
100
Order No.
1700690001
1630140001
1630140013
1630140025
1630140037
1630140049
Ordering data
Grid 7.0 mm
Type
KSW 4 10/7,00 W 1-10
KSW 4 5/7 W 1-5
Ordering data
Grid 7.5 mm
E.58
Type
KSW 4 8/7,5 W 1-8
KSW 4 12/7,5 1-12
KSW 4 12/7,5 13-24
KSW 4 12/7,5 25-36
KSW 4 12/7,5 37-48
KSW 4 12/7,5 49-60
1366810000 – 2013/2014
Ordering data
Grid 7.62 mm
Type
KSW 4 12/7,62 1-12
KSW 4 12/7,62 13-24
KSW 4 8/7,62 W 1-8
Qty.
10
10
10
Order No.
1652270001
1652270013
1700680001
Qty.
10
50
Order No.
1714080001
1812670000
Qty.
10
Order No.
1630090001
Qty.
10
10
10
Order No.
1629990000
1630010000
1629970000
Device markers
KSW – PCB plug-in connector labels
Ordering data
Grid 9.0 mm
Type
KSW 4 10/9,00 W 1-10
KSW 4,0/90 neutral
E
Ordering data
Grid 10.16 mm
Type
KSW 2,5 4/10,16 1-4
Ordering data
Blank
1366810000 – 2013/2014
Type
KSW 4 <100MM NEUTRAL
KSW 4 <150MM NEUTRAL
KSW 4 <50MM NEUTRAL
E.59
Device markers
KSW – PCB plug-in connector labels
Ordering data
Custom printing
Type
KSW 4 < 100MM SDR
KSW 4 < 150MM SONDDR.
KSW 4 < 50MM SDR
Qty.
1
1
1
Order No.
1629930000
1629950000
1629910000
E
E.60
1366810000 – 2013/2014