Precision Analog Microcontrollers
Features
•Microcontrollers for industrial,
instrumentation, medical,
communications, and automotive
applications
•Leading edge mixed-signal
integration with 12-, 16-,
or 24-bit ADCs, multiple
12-bit DACs, reference and
temperature sensor.
•ARM7TDMI Flash/EE and 24-bit
analog-to-digital converters in
5 mm × 5 mm LFCSP
•3-phase PWM, quadrature
encoder, PLA, and up to 128 kB
Flash/EE, plus 8 kB SRAM
•Fully integrated solution for
automotive battery monitoring
(ADuC703x series)
•8052 MicroConverter series
with Flash/EE and 12-bit to
24-bit analog I/O
•Complete suite of development
tools
Precision Analog Microcontrollers—ARM7™ and 8051 Series
Analog Devices precision analog microcontrollers combine precision analog functions,
such as high resolution ADCs and DACs, a voltage reference, and temperature sensor
with an industry-standard microcontroller and flash memory. For example, the ADuC702x
ARM7TDMI® family integrates 12-bit analog I/O with flash, SRAM, and a host of digital
peripherals. These devices use a single 32-bit bus for instructions and data, integrate a
JTAG test port for debug access, and operate up to 44 MHz. In addition to the 32-bit ARM®
instruction set, the core supports an instruction set that is compressed into 16 bits
(Thumb® mode). The on-chip precision analog I/O includes a multichannel 1 MSPS, 12-bit
ADC, up to four 12-bit voltage-output DACs, a low drift band gap voltage reference, a
temperature sensor, 3-phase PWM, a user-configurable PLA, and an uncommitted voltage
comparator. All of this, and more, come in a variety of package footprints with the smallest
being a tiny 5 mm × 5 mm, 32-lead chip scale package.
Getting more application specific, the ADuC7128/ADuC7129 extend the ADuC702x series to
include a quadrature encoder and PWM for dc motor control applications. They also feature
a 32-bit, 22 MHz DDS input followed by a high speed 10-bit DAC and a 100 Ω line driver,
useful for transducer excitation.
The ADuC703x series, specifically for automotive battery monitoring, integrates up to three
16-bit ADCs to measure battery voltage, current, and temperature, the required high voltage
I/O for direct battery interface, and an LIN transceiver to handle communications to the
engine control unit.
The new ADuC706x series with the ARM7 core, dual and single 24-bit Σ-∆ ADCs, PGA,
14-bit DAC, and precision current sources are particularly suited to direct connection and
signal processing in precision sensor and loop-powered applications.
www.analog.com/microcontroller
ARM7 Core Products with Precision 12-Bit Analog I/O (ADuC7019 to ADuC7028, ADuC7128, and ADuC7129)
Architectural Overview
The ARM7TDMI core is a 32-bit RISC machine. It uses a single 32-bit bus for instructions and data. The TDMI option provides four additional features:
a secondary 16-bit Thumb (T) instruction set, debug (D) support, support for long multiples (M), and includes the embedded ICE (I) module containing
the breakpoint and watchpoint registers, which allow code to be halted for debugging purposes.
Either 126 kB, 62 kB, or 32 kB of nonvolatile Flash/EE and 8 kB of SRAM are provided on chip with both blocks mapped into a single linear array.
ARM code can run directly from SRAM at 41.7 MHz/44 MHz (internal/external clock), given that the SRAM is configured as a 32-bit wide memory
array. The 80-lead devices support external memory.
On-chip firmware supports in-circuit serial download via the UART or I2C® and JTAG serial interface ports while nonintrusive emulation is also
supported via the JTAG interface.
Key Features
TYPICAL DNL ERROR, fs = 1MSPS
•ARM7TDMI MCU core
1.0
•16-/32-bit RISC architecture, 44 MHz operation
•Embedded JTAG for debug
0.5
Memory Organization
•8 kB SRAM in 2k × 32 bits
•Up to 126 kB Flash/EE in 31k × 16 bits
LSB
0
•Retention: 20 years
•Endurance: >10k cycles
•In-system programming (ISP) via UART,
I2C, or JTAG ports
–0.5
–1.0
0
1000
Analog I/O
2000
ADC CODES
3000
4000
•Multichannel, 12-bit, 1 MHz ADC
•Multiple 12-bit VOUT DACs
Differential nonlinearity plot of 12-bit ADC on ADuC7xxx device with core
running at full speed.
•40 ppm/°C VREF, 3°C temp sensor
•Uncommitted comparator
Additional Features
(1*0&95&3/".&.03:*/5&3'"$&
#"/%("1
3&'&3&/$&
•2 × GP timers
•UART, SPI, dual I2C, serial I/O
0/$)*1
04$*--"503
73&'
•Up to 40 GPIO pins
.69
•Power supply monitor and power-on reset
•3-phase PWM
#*5
"%$
.414
5&.1&3"563&
.0/*503
3".
L#
"3.5%.*
.$6
.)[
•Specified for 3 V operation (5 V compatible I/O)
•Temperature range: –40°C to +125°C
•6 mm × 6 mm and 9 mm × 9 mm LFCSP,
64-lead and 80-lead LQFP package options
•1 mA/MHz current consumption
•Low cost QuickStart™ Development System support
#*5
%"$
#*5
%"$
#*5
%"$
•Programmable logic array (PLA)
$0.1"3"503
%"$
1-"
+5"(
&.6-"5*0/
2
Each ADuC7xxx device operates from an accurate (±3%) on-chip oscillator and PLL generating an internal 41.7 MHz clock that is routed through a
programmable clock divider from which the MCU operating frequency is generated. Alternatively, the parts can run from a master clock up to 44 MHz.
Power consumption is 1 mA/MHz.
1--
#*5
%"$
'-"4)$0%&
"/%%"5"
.&.03:
L#
#*5
1)"4&
18.
8"5$)%0(
5*.&3
41**$
4611-:
.0/*503
5*.&34
$06/5&34
4&3*"%08/-0"%
6"35
"%V$
ADuC7xxx Series On-Chip Peripherals
High performance analog I/O and several other peripherals are included on chip. Some of them are examined here.
See the selection guide for a complete listing.
12-Bit ADC
12-Bit Multichannel VOUT DAC
Voltage Comparator
•Key specs @ 1 MSPS
•Monotonic to 12 bits
• INL = ±0.6 LSB
•Buffered/unbuffered outputs
The comparator can be configured to
generate an interrupt if a voltage input
exceeds a threshold level. The threshold
voltage can be set via an external pin or
by using one of the on-chip 12-bit DACs.
The output of the comparator can also be
routed both to the on-chip PLA and digital
output pin, or to the on-chip interrupt
controller. The comparator features 10 mV
hysteresis and 1 μs response.
• Offset/gain = ±0.5 LSB
•10 μs settling time
• SNR = 69 dB
•Output range of 0 V to VDD
•Input ranges: 0 V to VREF or ±VREF
•4 DACs on the ADuC7020/ADuC7026/
ADuC7028
•Input modes: single, pseudo, and fully
differential
•Trigger modes
•2 DACs on the ADuC7021/ADuC7024
•3 DACs on the ADuC7019
• External CONVST pin
• Timer overflow
• Software trigger
• PLA trigger
• Continuous
• Up to 16 channels (ADuC7027)
#"/%("1
3&'&3&/$&
.69
#*5
"%$
5)
5&.1&3"563&
.0/*503
12-BIT
DAC
DAC 0
12-BIT
DAC
DAC 1
12-BIT
DAC
DAC 2
12-BIT
DAC
DAC 3
*/5&33615
"/"-0(*/1651*/
0651651*/
"/"-0(*/1651*/
.69
1-"1*/
%"$
Programmable Logic Array (PLA)
The integrated PLA consists of two interconnected blocks of eight PLA elements for added flexibility. Each element can be configured to generate any
logic output function based on two inputs, eliminating the need for external logic gates. The PLA is programmed with run-time code via the standard
memory-mapped register (MMR) interface.
1-"'6/$5*0/"-*5:
4*/(-&1-"&-&.&/5
$0/'*(63&%#:
36/5*.&
40'58"3&
&-&.&/5
'&&%#"$,
"
*/165#*5
(1*01*/4
(1*01*/4
3&(*45&3#*54
3&(*45&3#*54
130(3".."#-&
-0(*$"33":
1-"'&&%#"$,
*/165#*5
#
&-&.&/5
'&&%#"$,
$-0$,4063$&
*/5&336154
1-",&:'&"563&4
r1-"#-0$,4
r&"$)#-0$,)"4&-&.&/54
$-0$,4
"%$$0/7&35
45"35
r5)*/,0'*5"4130(3".."#-&
(-6&-0(*$
&-&.&/5065165
0651651*/
"%$45"35$0/7&35
3&(*45&3#*54
'&&%#"$,
3
ARM7 Series with Quadrature Encoder and H-Bridge PWM for Motor Control
ADuC7128/ADuC7129
The ADuC7128/ADuC7129 combine an ARM7 microcontroller, 12-bit, 1 MSPS ADC, and a 10-bit DAC, along with a 16-bit PWM with H-bridge mode
and quadrature encoder. There is a 32-bit, 22 MHz DDS input to the DAC, which also incorporates a 100 Ω line driver. This level of integration benefits
designers of brushless dc (BLDC) and instrumentation systems, reducing external component count, while working in a familiar ARM7 environment.
4
Key Features
•ARM7 with 126 kB flash
•10-bit DAC with 32-bit, 22 MHz DDS
•16-bit PWM generator
•10-channel, 12-bit, 1 MSPS ADC
•Quadrature encoder
•Temperature range: –40°C to +125°C
Additional Features
•Dual UART
•Differential line driver output
•64-lead LFCSP package and 80-lead LQFP package
(external memory)
DDS DAC Operation
•32-bit DDS register
•4096 point table
#*5%"$
%%4
*7
2ND-ORDER
LPF
•0.005 Hz resolution
•Minimum frequency: 0.005 Hz
•Maximum frequency limited by LPF
•THD: 51 dB typ
Application Focus: ADuC7128/ADuC7129
in H-Bridge Motor Control
The ADuC7128 integrates a 6-channel PWM interface.
The PWM outputs can be configured to drive an
H-bridge or can be used as standard PWM outputs.
On power-up, the PWM outputs default to H-bridge
mode. This ensures that the motor is turned off by
default. In standard PWM mode, the outputs are
arranged as three pairs of PWM pins. Users have
control over the period of each pair of outputs and of
the duty cycle of each individual output.
"%V$
"%V$
#*5
"%$
18.
7%$
)*()4*%&
%3*7&3
)*()4*%&
%3*7&3
1"44*7&
'*-5&3
%$.0503
26"%3"563&
&/$0%&3
-084*%&
%3*7&3
.0503$633&/5
.050370-5"(&
-084*%&
%3*7&3
Integrated Battery Sensor for Automotive Battery Monitoring Includes High Voltage Physical Interface for LIN
ADuC703x Family
The ADuC703x family of automotive battery monitor solutions addresses a growing need to monitor and distribute power, and provide priority
to critical functions such as engine startup. The ADuC703x family measures elementary physical variables such as battery voltage, current, and
temperature to determine the battery’s state-of-charge (SOC) and state-of-health (SOH). The vehicle’s energy management system then uses this
data to reserve sufficient battery energy for a guaranteed engine start and to tailor the charging cycles resulting in reduced fuel consumption.
The ADuC703x family integrates an on-chip PGA (programmable gain amplifier) for a wide range of battery current measurements and, similarly,
attenuation for battery voltage measurement. Also on board are up to three 16-bit analog-to-digital converters (ADCs), an ARM7 microcontroller,
a local interconnect network (LIN) transceiver, and embedded memory in a single package. The devices offer a cost-efficient and space-saving
alternative to discrete solutions, which consists of a standalone processor, LIN transceiver, low dropout regulator (LDO), and analog front end (AFE).
As a result, the component can be located between the battery terminal and the connector on the main power cable, giving a great saving in space
and cost, while simplifying overall battery monitoring system design.
Key Features
•ARM7TDMI MCU core
•Operates from 12 V battery supply
•Low power consumption
•175 μA in low power mode
•Up to 10 mA at 10 MHz in regular mode
Memory Organization
•6 kB SRAM
•96 kB Flash/EE
•Retention: 20 years @ 85°C
Analog I/O
• 3 × 16-bit Σ-∆ ADC
•5 ppm/°C VREF
•±2°C temperature sensor
•Digital comparator and integrator
For automotive battery performance management, the integration of leading-edge data
converters and high voltage circuits with a high end, industry-standard MCU and flash
memory has provided the automotive designer with a high performance, low cost,
easy to use solution.
Additional Features
•Programmable gain amplifier (PGA)
•PLL
•Precision oscillator (±1%)
13&$*4*0/
3&'&3&/$&
•Timers (watchdog, wake-up, 2 × GP)
45*
•Power supply monitor
#*5
«"%$
•Power-on reset
•LIN (local interconnect network) transceiver
#*5
«"%$
•Temperature range: –40°C to +125°C
•7 mm × 7 mm, 48-lead LFCSP package
3".
"3.5%.*
.$6
#*5
«"%$
5&.1&3"563&
.0/*503
+5"(
&.6-"5*0/
.)[
.69
Part Number
-*/#4%
(1*0
7-%0
14.
103
'-"4)$0%&
"/%%"5"
.&.03:
8"5$)%0(
5*.&3
5*.&34
8",&1*/
13&$*4*0/
04$
-08108&3
04$
0/$)*1
1-41*
6"35
"%V$
ADCs
Flash (kB)
SRAM (kB)
Timers
Package
Price @ 1k ($U.S.)
ADuC7032
3
96
6
4
48-lead LQFP
7.55
ADuC7033
2
96
6
5
48-lead LFCSP, 48-lead LQFP
7.10
ADuC7034
2
32
4
5
48-lead LFCSP, 48-lead LQFP
6.73
5
Precision Analog Microcontroller (MicroConverter®) Products
Part
Number
MCU, MIPS
Flash Code
(Bytes)
Flash Data
(Bytes)
RAM
(Bytes)
External
Memory
Interface
Power Supply
(V)
GPIOs1
Download/
Debug
ADCs
DACs
Temp Sensor
Accuracy
(°C)2
SAR 12-Bit Analog-to-Digital Precision Analog Microcontroller Products with ARM7 Core
6
ADuC7019
ARM7, 44
62k
8k
None
2.7 to 3.6
14
JTAG +
UART/I2C6
12-bit, 5-channel
(2 differential), 1 MSPS
12-bit, triple
±3.0
ADuC7020
ARM7, 44
62k
8k
None
2.7 to 3.6
14
JTAG +
UART/I2C 6
12-bit, 5-channel
(2 differential), 1 MSPS
12-bit, quad
±3.0
ADuC7021
ARM7, 44
62k, 32k
8k
None
2.7 to 3.6
13
JTAG +
UART/I2C6
12-bit, 8-channel
(4 differential), 1 MSPS
12-bit, dual
±3.0
ADuC7022
ARM7, 44
62k, 32k
8k
None
2.7 to 3.6
13
JTAG +
UART/I2C6
12-bit, 10-channel
(5 differential), 1 MSPS
None
±3.0
ADuC7024
ARM7, 44
62k
8k
None
2.7 to 3.6
30
JTAG +
UART/I2C6
12-bit, 10-channel
(5 differential), 1 MSPS
12-bit, dual
±3.0
ADuC7025
ARM7, 44
62k, 32k
8k
None
2.7 to 3.6
30
JTAG +
UART/I2C6
12-bit, 12-channel
(5 differential), 1 MSPS
None
±3.0
ADuC7026
ARM7, 44
62k
8k
Code and data
2.7 to 3.6
40
±3.0
ARM7, 44
62k
8k
Code and data
2.7 to 3.6
40
12-bit, 12-channel
(6 differential), 1 MSPS
12-bit, 16-channel
(8 differential), 1 MSPS
12-bit, quad
ADuC7027
JTAG +
UART/I2C6
JTAG +
UART/I2C6
None
±3.0
12-bit, 8-channel
(4 differential), 1 MSPS
12-bit, quad
±3.0
ADuC7028
ARM7, 44
62k
8k
None
2.7 to 3.6
30
JTAG +
UART/I2C6
SAR 12-Bit Analog-to-Digital Precision Analog Microcontroller Products with ARM7 Core and H-Bridge PWM
ADuC7128
ARM7, 44
126k
8k
None
3.0 to 3.6
28
JTAG +
UART/I2C6
12-bit, 10-channel
(5 differential), 1 MSPS
10-bit DAC,
PWM
±3.0
ADuC7129
ARM7, 44
126k
8k
Code and data
3.0 to 3.6
38
JTAG +
UART/I2C6
12-bit, 10-channel
(5 differential), 1 MSPS
10-bit DAC,
PWM
±3.0
JTAG, UART,
I2C
JTAG, UART,
I2C
JTAG, UART,
I2C
Dual, 24-bit, 5-channel/
8-channel, 8 kSPS
Dual, 24-bit, 5-channel/
8-channel, 8 kSPS
Single, 24-bit, 5-channel,
8 kSPS
Single, 14-bit
±3.0
Single, 14-bit
±3.0
Single, 14-bit
±3.0
Multichannel 24-Bit Σ-∆ Analog-to-Digital Converters with ARM7 Core
ADuC7060 New ARM7, 10.24
32k
4k
No
2.5
16
ADuC7061 New ARM7, 10.24
32k
4k
No
2.5
8
ADuC7062 New ARM7, 10.24
32k
4k
No
2.5
8
Σ-∆ (16-Bit Analog-to-Digital) Precision Analog Microcontroller Products with ARM7 Core for Automotive Battery Management
ADuC7032
ARM7, 20
96k
6k
None
3 to 18
9
JTAG
3 × 16-bit Σ-∆ ADC
—
±2.0
ADuC7033
ARM7, 20
96k
6k
None
3 to 18
9
JTAG
2 × 16-bit Σ-∆ ADC
—
±2.0
ADuC7034
ARM7, 20
32k
4k
None
3 to 18
9
JTAG
2 × 16-bit Σ-∆ ADC
—
±2.0
Multichannel Σ-∆ (24-Bit and 16-Bit Analog-to-Digital) MicroConverter Products with 8052 Core
ADuC845
8052, 12
62k,
32k, 8k
4k
2k + 256
Data only
2.7 to 3.6
4.75 to 5.25
32
Single pin
or UART
24-bit, dual,
1.3 kSPS
12-bit, single
±1.5
ADuC847
8052, 12
62k,
32k, 8k
4k
2k + 256
Data only
2.7 to 3.6
4.75 to 5.25
32
Single pin
or UART
24-bit,
1.3 kSPS
12-bit, single
None
ADuC848
8052, 12
62k,
32k, 8k
4k
2k + 256
Data only
2.7 to 3.6
4.75 to 5.25
32
Single pin
or UART
16-bit,
1.3 kSPS
12-bit, single
None
Single pin
or UART
Single pin
or UART
16-bit, dual,
105 kSPS
24-bit and 16-bit,
105 kSPS
12-bit, single
±1.5
12-bit, single
±1.5
Σ-∆ (24-Bit and 16-Bit Analog-to-Digital) MicroConverter Products with 8052 Core
ADuC816
8052, 1.0
8k
640
256
Code and data
2.7 to 5.25
32
ADuC824
8052, 1.0
8k
640
256
Code and data
2.7 to 5.25
32
ADuC834
8052, 1.0
62k
4k
2k + 256
Code and data
2.7 to 5.25
32
Single pin
or UART
24-bit and 16-bit,
105 kSPS
12-bit, single
±1.5
ADuC836
8052, 1.0
62k
4k
2k + 256
Code and data
2.7 to 5.25
32
Single pin
or UART
16-bit, dual,
105 kSPS
12-bit, single
±1.5
Single pin
or UART
Single pin
or UART
12-bit, 8-channel,
200 kSPS
12-bit, 8-channel,
247 kSPS
12-bit, dual
±3.0
12-bit, dual
±1.5
Successive Approximation 12-Bit Analog-to-Digital MicroConverter Products with 8052 Core
ADuC812
8052, 1.3
8k
640
256
Code and data
2.7 to 5.5
32
ADuC814
8052, 1.3
8k
640
256
None
2.7 to 5.5
16
ADuC831
8052, 1.3
62k
4k
2k + 256
Code and data
2.7 to 5.5
32
Single pin
or UART
12-bit, 8-channel,
200 kSPS
12-bit, dual
±1.5
ADuC832
8052, 1.3
62k
4k
2k + 256
Code and data
2.7 to 5.5
32
Single pin
or UART
12-bit, 8-channel,
200 kSPS
12-bit, dual
±1.5
ADuC841
8052, 20
62k, 8k
4k
2k + 256
Data only
2.7 to 3.6
4.75 to 5.25
32
Single pin
or UART
12-bit, 8-channel,
400 kSPS
12-bit, dual
±1.5
ADuC842
8052, 16
62k,
32k, 8k
4k
2k + 256
Data only
2.7 to 3.6
4.75 to 5.25
32
Single pin
or UART
12-bit, 8-channel,
400 kSPS
12-bit, dual
±1.5
ADuC843
8052, 16
62k,
32k, 8k
4k
2k + 256
Data only
2.7 to 3.6
4.75 to 5.25
32
Single pin
or UART
12-bit, 8-channel,
400 kSPS
None
±1.5
Pins that are also analog inputs are limited to digital input only,
i.e., GPI, not GPIO. In the case of the ARM7 parts, all pins are full GPIO.
1
Temperature sensor is calibrated on all ∑-∆ parts, while it is not
calibrated on the successive approximation parts.
2
TIC: time interval counter.
3
PWMs
Reference
Serial Ports
Clocking
Timers3
Other Peripherals4
Temperature
Range5 (°C)
Package
Price
@ 1k
($U.S.)
See note 7
Internal 40 ppm or
external
UART, SPI,
2 I2C ports
External, internal (3%),
PLL (prog)
2 × 32-bit, 2 × 16-bit
PLA, comparator,
PSM, POR
–40 to +125
6 mm × 6 mm,
40-lead LFCSP
6.34
See note 7
Internal 40 ppm or
external
UART, SPI,
2 I2C ports
External, internal (3%),
PLL (prog)
2 × 32-bit, 2 × 16-bit
PLA, comparator,
PSM, POR
–40 to +125
6 mm × 6 mm,
40-lead CSP
6.80
See note 7
Internal 40 ppm or
external
UART, SPI,
2 I2C ports
External, internal (3%),
PLL (prog)
2 × 32-bit, 2 × 16-bit
PLA, comparator,
PSM, POR
–40 to +125
6 mm × 6 mm,
40-lead CSP
4.32
See note 7
Internal 40 ppm or
external
UART, SPI,
2 I2C ports
External, internal (3%),
PLL (prog)
2 × 32-bit, 2 × 16-bit
PLA, comparator,
PSM, POR
–40 to +125
6 mm × 6 mm,
40-lead CSP
3.98
3-phase,
16-bit
Internal 40 ppm or
external
UART, SPI,
2 I2C ports
External, internal (3%),
PLL (prog)
2 × 32-bit, 2 × 16-bit
PLA, comparator,
PSM, POR
–40 to +125
9 mm × 9 mm,
64-lead LFCSP and 64-lead LQFP
7.00
3-phase,
16-bit
Internal 40 ppm or
external
UART, SPI,
2 I2C ports
External, internal (3%),
PLL (prog)
2 × 32-bit, 2 × 16-bit
PLA, comparator,
PSM, POR
–40 to +125
9 mm × 9 mm,
64-lead LFCSP and 64-lead LQFP
5.24
3-phase,
16-bit
3-phase,
16-bit
Internal 40 ppm or
external
Internal 40 ppm or
external
UART, SPI,
2 I2C ports
UART, SPI,
2 I2C ports
External, internal (3%),
PLL (prog)
External, internal (3%),
PLL (prog)
–40 to +125
80-lead LQFP
8.80
2 × 32-bit, 2 × 16-bit
PLA, comparator,
PSM, POR
PLA, comparator,
PSM, POR
–40 to +125
80-lead LQFP
6.42
3-phase,
16-bit
Internal 40 ppm or
external
UART, SPI,
2 I2C ports
External, internal (3%),
PLL (prog)
2 × 32-bit, 2 × 16-bit
PLA, comparator,
PSM, POR
–40 to +125
6 mm × 6 mm,
64-ball BGA
6.80
6-channel, 16-bit
Internal 40 ppm or
external
2 UARTs, SPI,
2 I2C ports
External, internal (2%),
PLL (prog)
1 × 16-bit, 3 × 32-bit,
1 × 48-bit
PLA, comparator,
PSM, POR
–40 to +125
9 mm × 9 mm,
64-lead LFCSP
6.95
6-channel,
16-bit
Internal 40 ppm or
external
2 UARTs, SPI,
2 I2C ports
External, internal (2%),
PLL (prog)
1 × 16-bit, 3 × 32-bit,
1 × 48-bit
PLA, comparator,
PSM, POR
–40 to +125
9 mm × 9 mm,
64-lead LFCSP
7.74
6-channel
Internal ±10 ppm
UART, SPI, I2C
–40 to +125
48-lead LQFP,
48-lead LFCSP
4.90
2-channel
Internal ±10 ppm
UART, SPI, I2C
–40 to +125
5 mm × 5 mm,
32-lead LFCSP
3.95
2-channel
Internal ±10 ppm
UART, SPI, I2C
–40 to +125
5 mm × 5 mm,
32-lead LFCSP
3.40
—
Internal 5 ppm
LIN transceiver, SPI
—
Internal 5 ppm
—
2 × 32-bit, 2 × 16-bit
4 × timers
SPI/I2C/vectored
interrupt controller
SPI/I2C/vectored
interrupt controller
SPI/I2C/vectored
interrupt controller
Internal (1%), PLL (prog)
1 × 16-bit, 3 × 32-bit,
1 × 48-bit
Comparator, wake-up,
WDT
–40 to +125
48-lead LQFP
7.55
LIN transceiver, SPI
Internal (1%), PLL (prog)
1 × 16-bit, 3 × 32-bit,
1 × 48-bit
Comparator, wake-up,
WDT
–40 to +125
48-lead LFCSP,
48-lead LQFP
7.10
Internal 5 ppm
LIN transceiver, SPI
Internal (1%), PLL (prog)
1 × 16-bit, 3 × 32-bit,
1 × 48-bit
Comparator, wake-up,
WDT
–40 to +125
48-lead LFCSP
6.73
Dual, 16-bit
Internal
or external
UART, SPI, I2C
Internal, PLL
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT,
Isources, burnout
–40 to +125
56-lead LFCSP,
52-lead MQFP
8.95
Dual, 16-bit
Internal
or external
UART, SPI, I2C
Internal, PLL
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT,
Isources, burnout
–40 to +125
56-lead LFCSP,
52-lead MQFP
5.85
Dual, 16-bit
Internal
or external
UART, SPI, I2C
Internal, PLL
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT,
Isources, burnout
–40 to +125
56-lead LFCSP,
52-lead MQFP
4.98
UART, SPI, I2C
Internal, PLL
3 × 16-bit, 1 × TIC
UART, SPI, I2C
Internal, PLL
3 × 16-bit, 1 × TIC
PSM, WDT,
Isources, burnout
PSM, WDT,
Isources, burnout
Internal
or external
Internal
or external
None
None
External, internal (3%),
PLL (prog)
External, internal (3%),
PLL (prog)
External, internal (3%),
PLL (prog)
4 × timers
4 × timers
–40 to +85
–40 to +85
56-lead LFCSP,
52-lead MQFP
56-lead LFCSP,
52-lead MQFP
5.59
6.07
Dual, 16-bit
Internal
or external
UART, SPI, I2C
Internal, PLL
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT,
Isources, burnout
–40 to +125
56-lead LFCSP,
52-lead MQFP
12.32
Dual, 16-bit
Internal
or external
UART, SPI, I2C
Internal, PLL
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT,
Isources, burnout
–40 to +125
56-lead LFCSP,
52-lead MQFP
9.85
UART, SPI, I2C
External
3 × 16-bit
PSM, WDT
–40 to +125
56-lead LFCSP,
52-lead MQFP
8.30
UART, SPI, I C
Internal, PLL
3 × 16-bit, 1 × TIC
POR, PSM, WDT
–40 to +125
28-lead TSSOP
4.52
Internal
or external
Internal
or external
None
None
2
Dual, 16-bit
Internal
or external
UART, SPI, I2C
External
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT
–40 to +125
56-lead LFCSP,
52-lead MQFP
8.76
Dual, 16-bit
Internal
or external
UART, SPI, I2C
Internal, PLL
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT
–40 to +125
56-lead LFCSP,
52-lead MQFP
8.76
Dual, 16-bit
Internal 20 ppm or
external
UART, SPI, I2C
External
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT
–40 to +85
56-lead LFCSP,
52-lead MQFP
6.56
Dual, 16-bit
Internal 20 ppm or
external
UART, SPI, I2C
Internal, PLL
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT
–40 to +85
56-lead LFCSP,
52-lead MQFP
6.56
Dual, 16-bit
Internal 20 ppm or
external
UART, SPI, I2C
Internal, PLL
3 × 16-bit,
1 × baud rate, 1 × TIC
POR, PSM, WDT
–40 to +85
56-lead LFCSP,
52-lead MQFP
5.15
PSM: power supply monitor; WDT: watchdog timer; POR: power-on
reset; Isources: current sources; burnout: sensor burnout capability;
PLA: programmable logic array.
4
125°C applies to the MQFP package only.
5
6
UART/I2C download only.
7
Can be used through PLA.
7
Application Focus: Electrocardiogram Using ADuC7021
An electrocardiogram (ECG) is the recording of the electrical activity on the body surface generated by the heart. This electrical activity is collected by
skin electrodes placed on predetermined parts of the body. A low cost implementation of an ECG monitor is shown in the schematic here, and for the
main signal processing, the ADuC7021 MicroConverter device is chosen. This part features the necessary high performance analog peripherals, a fast
ARM7 core, integrated 62 kB flash for code, and several other useful peripherals. The ADC converts the analog signal from the differential amplifier to
a digital signal. The software, resident in the ADuC7021 flash, then processes the digitized signal to produce the final ECG trace. Because of the flashbased code memory on the ADuC7021, this customization can be done after manufacture or even as the individual patient’s needs change.
For more information, see complete technical article at www.analog.com/library/analogdialogue/archives/37-11/ecg.pdf.
1N5817
VIN = +3V
+
RECHARGEABLE
BATTERY
ADP3607-5
2
VIN
1
CP+
3
CP–
+5V
VOUT 8
+
CP1
10¿F
VSENSE 5
+
ADP3605
VIN
8
1
CP +
3
CP –
VOUT 7
R
31.6k±
VSENSE 5
SD
GND
SD
GND
4
7
4
2
–5V
CO
+ 10¿F
D1
1N5817
+
CP1
10¿F
+3V
+ CO1
10¿F
10¿F
C1
4.7¿F
+3V
+5V
Rò1
220k±
Rò3
220k±
Rò2
220k±
ADuC7021
3
C1
R1
0.1¿F 10k±
R3
22k±
R4
1M±
R2
22k±
7
POWER-DOWN
8
RG
6.98k±
AD620A
G=8
ADC
6
5
1
+5V
OP97
+VDD
ADuM1301
TXD
RXD
ISOLATED
RS-232
CIRCUITRY
TO
PC
DAC
4
2
C2
+ 10¿F
D2
1N5817
+5V
P2.0
–5V
–5V
Application Focus: Pulse Oximeter Uses ADuC7024
Beyond heart rate, blood pressure, respiratory rate, and temperature—pulse oximetry is considered to be the “fifth vital sign” of health status.
A pulse oximeter is a medical device that provides a noninvasive measure of the amount of oxygen in a patient’s arterial blood.
A typical oximetry sensor has a pair of light-emitting diodes (one red with 660 nm wavelength, one infrared with 940 nm wavelength) facing a
photodiode through a translucent part of the patient’s body, usually a fingertip or an earlobe. The percentage of blood oxygen is calculated based on
the absorption rate from each wavelength of light after it passes through the patient’s body.
The precision analog microcontroller family of products from Analog Devices includes the key analog building blocks required for high end oximetry
designs. The ADuC7024, used here, includes a high performance, high speed, multichannel, 12-bit, 1 MSPS ADC and two DACs. The MicroConverter
device also includes a 32-bit ARM7TDMI core. Running at 41.8 MHz, it provides a very powerful computational platform for digital signal processing
algorithms to detect arterial blood pulsations, while allowing plenty of CPU performance for additional functions, such as control of the graphics LCD
display. The ADuC7024 MicroConverter device features 30 general-purpose I/Os (GPIOs), required for interfacing with the LCD. With fewer I/Os, the
same level of performance can be achieved by using the ADuC7021, available in a space-saving 6 mm × 6 mm LFCSP package.
For more information, see complete technical article at www.analog.com/library/analogdialogue/archives/41-01/pulse_oximeter.html.
7$$
-$%
3&%
48
48
*/'3"3&%
#"/%("1
3&'&3&/$&
48
#*5
%"$
(1*0
#*5
%"$
#-0$,
0/$)*1
04$*--"503
"%$
73&'
.69
%
%
%
1("
#*5
"%$
.414
5&.1&3"563&
.0/*503
"%$
3".
L#
"3.5%.*
.$6
.)[
1--
'-"4)$0%&
"/%%"5"
.&.03:
L#
#*5
1)"4&
18.
8"5$)%0(
5*.&3
41**$
4611-:
.0/*503
5*.&34
$06/5&34
4&3*"%08/-0"%
6"35
".1
1(""/%0''4&5
$0.1"3"503
%"$
".1
%"$0''4&5$0/530%"$-&%%3*7&$0/530-
1-"
+5"(
&.6-"5*0/
8
"%V$
Transceiver Module with SFP and XFP Chipset and Reference Design
Analog Devices’ chipsets and reference designs work together seamlessly and enable designers to develop best-in-class optical transceivers with
minimal time and effort. XFP is rapidly becoming the leading standard for optical transceiver modules that connect to 10 Gbps ports, such as those
used in Ethernet, Fibre Channel, and SONET/SDH protocol applications.
For more information, visit www.analog.com/xfp_ref_design and www.analog.com/sfp_ref_design.
The chipset consists of
•TIA:
• ADN2821, 11.1 Gbps, 3.3 V, low noise, high gain
transimpedance amplifier
•LDD:
• ADN2525, 10 Gbps active back-match, differential laser
diode driver
• ADN2530, 10 Gbps active back-termination VCSE driver
•XFP signal conditioner:
• ADN2926/ADN2927, standalone transmit and receive
functions in a 4 mm × 4 mm LFCSP
• ADN2928, XFP single chip transceiver IC
•Microcontroller:
• ADuC7020, precision analog microcontroller:
44 MIPS ARM7 flash MCU, 5-channel, 1 MSPS, 12-bit ADC,
quad 12-bit DAC, two I2C ports, in 6 mm × 6 mm, 40-lead LFCSP
Energy Measurement IC Integrates ADE Core with 8052 Core
The ADE51xx and ADE55xx energy meter SoC (system on a chip) families provide a cost-effective solution for meter manufacturers by integrating
ADI’s proven energy measurement core with the 8052 microprocessor, on-chip flash memory, LCD driver, real-time clock (RTC), and intelligent battery
management. The ADE51xx and ADE55xx families have unique battery management features that consume less than 1.5 μA of current in battery
mode while keeping critical system components active. Based on ADI’s field-proven ADE energy measurement core that is designed into more than
225 million energy meters worldwide, these highly integrated SoC devices provide a high performance, cost-effective, and low risk solution.
For more information, visit www.analog.com/energymeter.
Features
Benefits
• 4-quadrant high precision
energy measurement
• Single chip solution
• Battery operation down to 2.4 V
power supply
• Power fail/battery management
with no external component
needed
• 104-segment LCD driver
• Low power RTC—1.5 μA typical
• No external battery switching
circuitry required
• LCD display maintained in
battery mode
• Extended battery life with low
voltage operation
• Integrated LCD contrast
adjustment
• RTC compensation accurate to
2 ppm
• Digital temperature
measurement
Part Number
ADE7569
ADE7566
ADE7169
ADE7166
ADE5569
ADE5566
ADE5169
ADE5166
Antitamper
W + VA + RMS
VAR
di/dt
RTC
UART
Flash (kB)
RAM (Bytes)
No
No
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Partial
Partial
Partial
Partial
Full
Full
Full
Full
1
1
1
1
2
2
2
2
8 or 16
8 or 16
8 or 16
8 or 16
62
62
62
62
512
512
512
512
2048
2048
2048
2048
9
QuickStart Development Tools for ADuC7xxx Series
All ADuC7xxx series precision analog microcontroller products are supported by a comprehensive suite of software development tools that are shipped
with supporting hardware. The ADuC7xxx series low cost QuickStart Development System includes a suite of software development tools by Keil
Software and IAR Systems. The hardware includes a power supply, cables, an evaluation board, and an RDI-compliant JTAG emulator. The QuickStart
Development System is priced at $249 (with emulator) and at $75 (without emulator) and is available directly from Analog Devices.
All you need to get started:
•Evaluation board
10
•ADI mIDAS-Link JTAG emulator
•Power supply
•IAR Systems WorkBench
for ARM (32k limit)
•Serial downloader
•PLA tool
•Serial download cable
•Keil μVision3 IDE (16k limit)
Components of the ADuC7xxx Series QuickStart Development System.
Part on
Eval Product
Board Type/
Description
MiniKit ($30)
ADuC7020
Mini board
ADuC7020 only
No
EVAL-ADUC7020MKZ
QuickStart Kit ($75)
ADuC7020
Evaluation board
ADuC7019, ADuC7020,
ADuC7021, ADuC7022
No
EVAL-ADUC7020QSZ Evaluation/upgrade system
QuickStart Kit ($75)
ADuC7024
Evaluation board ADuC7024, ADuC7025
No
EVAL-ADUC7024QSZ Evaluation/upgrade system
QuickStart Kit ($75)
ADuC7026
Evaluation board ADuC7026, ADuC7027
No
EVAL-ADUC7026QSZ Evaluation/upgrade system
QuickStart Plus Kit ($249)
ADuC7128
Evaluation board
ADuC7128
Yes
EVAL-ADUC7128QSPZ
Full development system
QuickStart Plus Kit ($249)
ADuC7129
Evaluation board
ADuC7129
Yes
EVAL-ADUC7129QSPZ
Full development system
QuickStart Plus Kit ($249)
ADuC7033
Evaluation board ADuC7033, ADuC7034
Yes
EVAL-ADUC7033QSPZ
Full development system
QuickStart Plus Kit ($249)
ADuC7032
Evaluation board
Yes
EVAL-ADUC7032QSPZ
Full development system
QuickStart Plus Kit ($249)
ADuC7026
Evaluation board ADuC7019, ADuC702x
Yes
EVAL-ADUC7026QSPZ
Full development system
QuickStart Plus Kit ($249)
ADuC7060
Evaluation board
ADuC7060, ADuC7061,
ADu7062
Yes
EVAL-ADUC7060QSPZ
Full development system
Development System
Products Supported Emulator Order Part Number
ADuC7032
MiniKit—ADuC7020
For a rapid start with the ARM7TDMI-based precision analog
microcontroller, Analog Devices is offering a very low cost evaluation
kit, the ADuC7020 MiniKit. This is a small adapter board with the form
factor of a standard 40-lead DIL-socket. It is powered directly from a
9 V battery block and can be connected to a PC with the included serial
download cable. In addition to the evaluation software package, it comes
with a comprehensive installation and getting-started presentation on
CD, to enable the user to debug code in the on-chip flash memory. This
low budget evaluation tool enables the user to experience the quality of
the high performance 12-bit analog front end (12-bit/1 MSPS ADC and
12-bit voltage output DAC) in combination with the powerful processing
capabilities of the 32-/16-bit ARM7TDMI core and the integrated realtime-programmable logic array (PLA).
The MiniKit consists of
•Mini board
•IAR Workbench IDE (32k limited)
•Power supply cable
• Compiler/simulator/debugger
•Serial download cable
•Serial downloader
•Keil μVision3 IDE (16k limited)
•PLA tool
• Compiler/simulator/debugger
•Example code
Description
Prototyping system
ADuC8xx Series: 8052-Based MicroConverter Products
The ADuC8xx series was the first to integrate true 12-bit to 24-bit analog precision, in-circuit reprogrammable Flash/EE memory, and an on-chip 8052
core. Applications include industrial control, precision instrumentation, and communications infrastructure. Options with high resolution Σ-∆ ADCs,
such as ADuC845, ADuC847, and ADuC848, are particularly suitable for applications that call for precise measurement of low frequency signals with
a wide dynamic range. Examples include intelligent sensor calibration and conditioning, smart transmitters, weigh scales, temperature and pressure
transducers, 4 mA to 20 mA control loops, patient monitoring equipment, and portable test-and-measurement gear.
11
Precision Analog
•12-bit to 24-bit ADC resolution
GPIO
•Sample rates to 400 kSPS
•Flexible ADC input multiplexing
24-BIT
ADC
A
•Programmable gain differential inputs
12-BIT
DAC
MUX
•Self-calibration
24-BIT
ADC
•On-chip 2.5 V band gap reference
•Single or dual, 12-bit rail-to-rail DAC
TEMPERATURE
SENSOR
Integrated Programmable Peripherals
•8052 MCU core (up to 20 MIPS)
VOLTAGE
REFERENCE
RAM
8052
MCU
12MHz
•Flash code memory (up to 62k)
JTAG
EMULATION
REFERENCE
DETECT
EXCITATION
CURRENT
SOURCES
•Flash data memory (up to 4k)
•RAM (up to 2k)
FLASH CODE
AND DATA
MEMORY
PWM
WATCHDOG
TIMER
SPI/I2C
SUPPLY
MONITOR
TIMERS/
COUNTERS
DOWNLOAD
DEBUG
UART
ADuC845
•Flexible SPI, I2C, and UART serial ports
•Multiple PWM outputs
The ADuC845 features two 24-bit Σ-∆ analog-to-digital converters (ADCs) with 10 single-ended or five
fully differential channels on a single chip. This is integrated with a fast, programmable, 8-bit, single-cycle,
8052 flash MCU.
•Watchdog timer
QuickStart Development Tools ADuC8xx Series
•Power supply monitor
The “entry level” QuickStart Development System allows
designers to rapidly evaluate MicroConverter performance
and functionality, and then begin a prototype development.
The system provides all of the tools needed, including
software tools, development board, integrated serial
download/debug cable, and power supply. It fully
supports assembly level code development via
a serial port debug path and provides designers
with access to a demonstration project of the
C-level development environment available in
QuickStart Plus.
•High speed baud rate generator
•Robust internal POR
Essential Embedded Tools
•Serial port downloader/debugger
•Single pin emulator
•Code lockout security feature
Additional Features
•TSSOP, MQFP, and CSP packages
•Extended temperature range to 125°C
•Pin-compatible upgrade paths
•3 V and 5 V operation
Development System
A small, nonintrusive, single-pin emulator POD and
the accompanying Aspire™ Integrated Development
Environment (IDE) are supplied directly by Accutron
Ltd. and can be ordered via the company’s website.
Components of the ADuC8xx Series QuickStart
Plus Development Tools
Support Product
Board
Emulator
Cables/Power Supply
Software
QuickStart Kit ($75)
ADuC8xx series
Evaluation board
No
Download/debug cable and
power supply
IDE (assembly only)
μSpear™ ($299)
ADuC8xx series
No
Yes
Serial cable
IDE (C + assembly),
Keil compiler (trial version)
Precision Analog Microcontroller with Unequalled Data Acquisition and Processing
Performance for Industrial and Instrumentation Applications
ADuC706x Family
The ADuC706x family of ARM7 microcontrollers with best-in-class data conversion performance is ideal for industrial systems
engineers designing smart sensing, factory automation, and instrumentation equipment.
ADuC7060 incorporates two 24-bit Σ-∆ ADCs and a host of analog peripherals with ARM7 core to create a solution for precision
sensing applications. The integration of a 32-bit RISC MCU, flash memory, and high resolution data converters in a small footprint,
combined with low power operation eliminates the complexity, cost, and performance degradation issues associated with discrete
mixed-signal solutions.
Designed to support 4 mA to 20 mA loop-powered applications and precision instrumentation, the 24-bit Σ-∆ ADC provides the
resolution required by high performance industrial and instrumentation equipment, while keeping the noise low at just 60 nV.
This performance combined with an ARM7 provides a single chip solution that can handle all data acquisition, processing, and
communications functions at the sensor node.
In addition to the 5-channel, 24-bit Σ-∆ ADC with PGA and the ARM7 core with eight interrupt priority levels, the ADuC706x
products integrate 32 kB flash memory and 4 kB SRAM, a 14-bit DAC, multiplexers, buffers, an auxiliary 8-channel, 24-bit ADC for
cold junction compensation in thermocouple applications, and SPI, UART, and I2C ports. Operating current is just 2.6 mA with all
peripherals activated.
Key Features
•ARM7TDMI MCU core
Analog Devices, Inc.
Worldwide Headquarters
Analog Devices, Inc.
One Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
U.S.A.
Tel: 781.329.4700
(800.262.5643,
U.S.A. only)
Fax: 781.461.3113
•Low power consumption
•2.6 mA with all peripherals activated
Memory
•4 kB SRAM
•32 kB Flash/EE
Analog I/O
•2 × 24-bit Σ-∆ ADC
•14-bit DAC
Analog Devices, Inc.
Europe Headquarters
Analog Devices, Inc.
Wilhelm-Wagenfeld-Str. 6
80807 Munich
Germany
Tel: 49.89.76903.0
Fax: 49.89.76903.157
•10 ppm/°C VREF
•3°C temperature sensor
Additional Features
•Programmable gain amplifier (PGA)
•Precision oscillator (±1%)
•Timers (WDT, wake-up, PWM)
•VIC (vectored interrupt controller)
•2× excitation current sources
•Temperature range: –40°C to +125°C
•5 mm × 5 mm, 32-lead LFCSP package
Product
Number
24-Bit ADCs
AINs/GPIOs
Flash (kB)
SRAM (kB)
Package
Price @ 1k ($U.S.)
ADuC7060
2
13, 16
32
4
48-lead LFCSP, 48-lead LQFP
4.90
ADuC7061
2
13, 8
32
4
5 mm × 5 mm, 32-lead LFCSP
3.95
ADuC7062
1
5, 8
32
4
5 mm × 5 mm, 32-lead LFCSP
3.40
For more information on Analog Devices’ range of precision analog microcontrollers,
visit www.analog.com/microcontroller.
©2008 Analog Devices, Inc. All rights reserved.
Trademarks and registered trademarks are the property
of their respective owners.
Printed in the U.S.A.
BR04809-2-7/08(D)
www.analog.com/microcontroller
Analog Devices, Inc.
Japan Headquarters
Analog Devices, KK
New Pier Takeshiba
South Tower Building
1-16-1 Kaigan, Minato-ku,
Tokyo, 105-6891
Japan
Tel: 813.5402.8200
Fax: 813.5402.1064
Analog Devices, Inc.
Southeast Asia
Headquarters
Analog Devices
22/F One Corporate Avenue
222 Hu Bin Road
Shanghai, 200021
China
Tel: 86.21.2320.8000
Fax: 86.21.2320.8222