CryptoMemory and Secure Memory: Standard Product Offerings The family of CryptoMemory® devices in the following tables are available as standard products. Options are listed for each device including, Smart Card Modules, Standard Packages and Wafers. Ordering codes indicate specific options to be used with the device number (e.g., AT88SC1616C-MJ denotes the 16K CryptoMemory in a “J” module). Options marked with an “m” are available, and those marked with a “1” are most commonly sold and therefore may have reduced leadtimes. Actual ship quantity in module form will vary +/- 20% depending upon die per wafer. The following pages give details of the package options for the various ordering codes. 0.0.1 CryptoMemory Devices Smart Card Modules (Commercial Temperature) Standard Packages (Industrial Temperature) 7 mil Wafer (Industrial Temperature) -MJ -MP -SU -PU -WI AT88SC0104C 1 m 1 m m AT88SC0204C 1 m 1 m m AT88SC0404C 1 m 1 m m AT88SC0808C 1 m 1 m m AT88SC1616C 1 m 1 m m AT88SC3216C 1 1 m m AT88SC6416C 1 1 m m AT88SC12816C 1 1 m m AT88SC25616C 1 1 m m CryptoMemory and Secure Memory Standard Product Offering 5044F-SMIC-6/08 0.0.2 Secure Memory Smart Card Modules (Commercial Temperature) Devices Standard Packages (Industrial Temperature) -09ET-00 -09PT-00 AT88SC102 1 m m AT88SC1003 1 m m AT88SC153 1 m 1 m m AT88SC1608 1 m 1 m m Notes: -10SU-00 -10PU-00 7 mil Wafer (Industrial Temperature) -10WI-00 1. m = available 2. 1 = most commonly sold and may have reduced leadtimes 3. All devices operate at 2.7–5.5V except AT88SC1003, which operates at 4.5–5.5V. 4. All modules and packages are RoHS compliant. 2 Crypto SM Ordering Codes 5044F–SMIC–6/08 Crypto SM Ordering Codes CryptoMemory Ordering Codes Smart Card Modules Ordering Code: AT88SCxxxxC-MJ Ordering Code: AT88SCxxxxC-MP Module Size: M2 Dimension*: 12.6 x 11.4 [mm] Glob Top: Round - 08.0 [mm] Thickness: 0.58 [mm] Pitch: 14.25 mm Products: AT88SC0104C AT88SC0204C AT88SC0404C AT88SC0808C AT88SC1616C AT88SC3216C AT88SC6416C AT88SC12816C AT88SC25616C Module Size: M2 Dimension*: 12.6 x 11.4 [mm] Glob Top: Square – 8.8 x 8.8 [mm] Thickness: 0.58 [mm] Pitch: 14.25 mm Products: AT88SC0104C AT88SC0204C AT88SC0404C AT88SC0808C AT88SC1616C Note: *The module dimensions listed refer to the dimensions of the exposed metal contact area. The actual dimensions of the module after excise or punching from the carrier tape are typically 0.4 mm greater in both directions (i.e., a punched M2 module will yield 13.0 x 11.8 mm) 3 5044F–SMIC–6/08 CryptoMemory Ordering Codes Standard Packages Ordering Code: AT88SCxxxxC-SU 8S1, 8-lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC) Products: AT88SC0104C, AT88SC0204C, AT88SC0404C, AT88SC0808C, AT88SC1616C, AT88SC3216C, AT88SC6416C, AT88SC12816C, AT88SC25616C C 1 E E1 L N Ø TOP VIEW END VIEW e b COMMON DIMENSIONS (Unit of Measure = mm) A A1 D SIDE VIEW SYMBOL MIN NOM MAX A 1.35 – 1.75 A1 0.10 – 0.25 b 0.31 – 0.51 C 0.17 – 0.25 D 4.80 – 5.05 E1 3.81 – 3.99 E 5.79 – 6.20 e L Ρ NOTE 1.27 BSC 0.40 – 1.27 0˚ – 8˚ Note: These drawings are for general information only. Refer to JEDEC Drawing MS-012, Variation AA for proper dimensions, tolerances, datums, etc. 3/17/05 R 4 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TITLE 8S1, 8-lead (0.150" Wide Body), Plastic Gull Wing Small Outline (JEDEC SOIC) DRAWING NO. REV. 8S1 C Crypto SM Ordering Codes 5044F–SMIC–6/08 Crypto SM Ordering Codes CryptoMemory Ordering Codes Standard Packages Ordering Code: AT88SCxxxxC-PU 8P3, 8-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP) Products: AT88SC0104C, AT88SC0204C, AT88SC0404C, AT88SC0808C, AT88SC1616C, AT88SC3216C, AT88SC6416C, AT88SC12816C, AT88SC25616C E 1 E1 N Top View c eA End View COMMON DIMENSIONS (Unit of Measure = inches) D e D1 A2 A SYMBOL MIN NOM A b2 b3 b 4 PLCS Side View L 0.210 NOTE 2 A2 0.115 0.130 0.195 b 0.014 0.018 0.022 5 b2 0.045 0.060 0.070 6 6 b3 0.030 0.039 0.045 c 0.008 0.010 0.014 D 0.355 0.365 0.400 3 D1 0.005 E 0.300 0.310 0.325 4 E1 0.240 0.250 0.280 3 0.150 2 e 3 0.100 BSC eA L Notes: MAX 0.300 BSC 0.115 0.130 4 1. This drawing is for general information only; refer to JEDEC Drawing MS-001, Variation BA for additional information. 2. Dimensions A and L are measured with the package seated in JEDEC seating plane Gauge GS-3. 3. D, D1 and E1 dimensions do not include mold Flash or protrusions. Mold Flash or protrusions shall not exceed 0.010 inch. 4. E and eA measured with the leads constrained to be perpendicular to datum. 5. Pointed or rounded lead tips are preferred to ease insertion. 6. b2 and b3 maximum dimensions do not include Dambar protrusions. Dambar protrusions shall not exceed 0.010 (0.25 mm). 01/09/02 R 2325 Orchard Parkway San Jose, CA 95131 TITLE 8P3, 8-lead, 0.300" Wide Body, Plastic Dual In-line Package (PDIP) DRAWING NO. REV. 8P3 B Note: Dimensions in inches and (millimeters). 5 5044F–SMIC–6/08 Secure Memory Ordering Codes Smart Card Modules Ordering Code: AT88SCxxx-09ET-00 Ordering Code: AT88SCxxx-09PT-00 Module Size: M2 Dimension*: 12.6 x 11.4 [mm] Glob Top: Square – 8.8 x 8.8 [mm] Thickness: 0.58 [mm] Pitch: 14.25 mm Module Size: M2 Dimension*: 12.6 x 11.4 [mm] Glob Top: Round – ? 8.0 [mm] Thickness: 0.58 [mm] Pitch: 14.25 mm Products: AT88SC102 AT88SC1003 AT88SC153 AT88SC1608 Products: AT88SC102 AT88SC1003 AT88SC153 AT88SC1608 Note: *The module dimensions listed refer to the dimensions of the exposed metal contact area. The actual dimensions of the module after excise or punching from the carrier tape are typically 0.4 mm greater in both directions (i.e., a punched M2 module will yield 13.0 x 11.8 mm) 6 Crypto SM Ordering Codes 5044F–SMIC–6/08 Crypto SM Ordering Codes Secure Memory Ordering Codes Standard Packages Ordering Code: AT88SCxxx-10SU-00 8S1, 8-lead, 0.150" Wide, Plastic Gull Wing Small Outline (JEDEC SOIC) Products: AT88SC153, AT88SC1608 C 1 E E1 L N Ø TOP VIEW END VIEW e b COMMON DIMENSIONS (Unit of Measure = mm) A A1 D SIDE VIEW SYMBOL MIN NOM MAX A 1.35 – 1.75 A1 0.10 – 0.25 b 0.31 – 0.51 C 0.17 – 0.25 D 4.80 – 5.05 E1 3.81 – 3.99 E 5.79 – 6.20 e L Ρ NOTE 1.27 BSC 0.40 – 1.27 0˚ – 8˚ Note: These drawings are for general information only. Refer to JEDEC Drawing MS-012, Variation AA for proper dimensions, tolerances, datums, etc. 3/17/05 R 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TITLE 8S1, 8-lead (0.150" Wide Body), Plastic Gull Wing Small Outline (JEDEC SOIC) DRAWING NO. REV. 8S1 C 7 5044F–SMIC–6/08 Secure Memory Ordering Codes Standard Packages Ordering Code: AT88SCxxx-10PU-00 8P3, 8-lead, 0.300" Wide, Plastic Dual Inline Package (PDIP) Products: AT88SC153, AT88SC1608 E 1 E1 N Top View c eA End View COMMON DIMENSIONS (Unit of Measure = inches) D e D1 A2 A SYMBOL MIN NOM A b2 L b3 b 4 PLCS NOTE 2 A2 0.115 0.130 0.195 b 0.014 0.018 0.022 5 b2 0.045 0.060 0.070 6 b3 0.030 0.039 0.045 6 c 0.008 0.010 0.014 D 0.355 0.365 0.400 3 D1 0.005 E 0.300 0.310 0.325 4 E1 0.240 0.250 0.280 3 0.150 2 3 0.100 BSC eA L Notes: 0.210 e Side View MAX 0.300 BSC 0.115 0.130 4 1. This drawing is for general information only; refer to JEDEC Drawing MS-001, Variation BA for additional information. 2. Dimensions A and L are measured with the package seated in JEDEC seating plane Gauge GS-3. 3. D, D1 and E1 dimensions do not include mold Flash or protrusions. Mold Flash or protrusions shall not exceed 0.010 inch. 4. E and eA measured with the leads constrained to be perpendicular to datum. 5. Pointed or rounded lead tips are preferred to ease insertion. 6. b2 and b3 maximum dimensions do not include Dambar protrusions. Dambar protrusions shall not exceed 0.010 (0.25 mm). 01/09/02 R 2325 Orchard Parkway San Jose, CA 95131 TITLE 8P3, 8-lead, 0.300" Wide Body, Plastic Dual In-line Package (PDIP) DRAWING NO. REV. 8P3 B Note: Dimensions in inches and (millimeters). 8 Crypto SM Ordering Codes 5044F–SMIC–6/08 Crypto SM Ordering Codes 1. Revision History Date Doc. Rev. Comments 6/2008 5044F Updated to new template 7/2006 5044E Revision history implemented. Added new Smart Card module and plastic package offerings, including RoHS packages. 9 5044F–SMIC–6/08 Headquarters International Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Atmel Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369 Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 Saint-Quentin-enYvelines Cedex France Tel: (33) 1-30-60-70-00 Fax: (33) 1-30-60-71-11 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Technical Support [email protected] Sales Contact www.atmel.com/contacts Product Contact Web Site www.atmel.com Literature Requests www.atmel.com/literature Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. © 2008 Atmel Corporation. All rights reserved. Atmel ®, logo and combinations thereof, CryptoMemory ® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. 5044F–SMIC–6/08