StaticGuard Automotive Series Multilayer Varistors for Automotive Applications GENERAL DESCRIPTION The StaticGuard Automotive Series are low capacitance versions of the TransGuard and are designed for general ESD protection of CMOS, Bi-Polar, and SiGe based systems. The low capacitance makes these products suitable for use in high speed data transmission lines. FEATURES • AEC Q200 Qualified • ISO 7637 Pulse 1-3 capability • Meet 27.5Vdc Jump Start requirements • Multi-strike capability • Sub 1nS response to ESD strike HOW TO ORDER VC AS 06 LC 18 X 500 R P Varistor Chip Series Case Size Low Cap Design Working Voltage Energy Rating Clamping Voltage 18 = 18.0VDC A = 0.10 Joules V = 0.02 Joules X = 0.05 Joules 150 = 18V 200 = 22V 300 = 32V 400 = 42V 500 = 50V Packaging (PCS/REEL) Termination AS = Automotive 04 = 0402 06 = 0603 08 = 0805 P = Ni/S D = 1,000 R = 4,000 T = 10,000 W = 0402 10000 ELECTRIAL CHARACTERISTICS AVX Part Number Working Working Voltage Voltage (DC) (AC) Clamping Voltage Test Current For VC Maximum Leakage Current Transient Energy Rating Peak Current Rating Typical Cap Case Size Power Dissipation VCAS04LC18V500 ≤18.0 ≤14.0 50 1 10 0.02 15 40 0402 0.0004 VCAS06LC18X500 ≤18.0 ≤14.0 50 1 10 0.05 30 50 0603 0.001 VCAS08LC18A500 ≤18.0 ≤14.0 50 1 10 0.10 30 80 0805 0.002 VW (DC) VW (AC) VC IVC IL ET IP Cap DC Working Voltage (V) AC Working Voltage (V) Clamping Voltage (V @ IVC ) Test Current for VC (A, 8x20μS) Maximum Leakage Current at the Working Voltage (μA) Transient Energy Rating (J, 10x1000μS) Peak Current Rating (A, 8x20μS) Typical Capacitance (pF) @ frequency specified and 0.5 VRMS 43 StaticGuard Automotive Series Multilayer Varistors for Automotive Applications VOLTAGE/CURRENT CHARACTERISTICS ELECTRICAL TRANSIENT CONDUCTION 44 StaticGuard Automotive Series Multilayer Varistors for Automotive Applications VOLTAGE/CURRENT CHARACTERISTICS VCAS04LC18V500 VCAS06LC18X500 VCAS08LC18A500 45