EF-0926-20B

EF-0926-20
The 926 filter is a compact, single phase, high
current device with very good common mode
and differential mode insertion loss.
It is useful in power control sections where the
ground coil will help eliminate system ground
loop noise.
The package features the 16 amp IEC connector
which facilitates the use of a detachable cord
set.
The "thru" bulkhead mounting provides the ultimate in RF noise suppression.
Other configurations are also available.
Operating Voltage = 115 / 250 V~
Operating Current = 20 A / 115 V~, 16 A / 250
V~
Operating Frequency = 50 / 60 Hz
Temperature Range = -20 To 50 Deg. C
Diel. Withstnd (L -Case) = 1500 V~ For 1 Min.
Diel. Withstnd (L -L) = 1500 Vdc For 1 Min.
Leakage Current = 1.5Ma At 250 V~, 60 Hz
Discharge Volts After 1 Sec = 34 V Max.
Ordering Information
With Ring Terminals:
EF-0926-20
Without Ring Terminals: EF-0926-20S
USA
JMK Inc 15 Caldwell Dr. Amherst, NH 03031
EUR
JMK Inc Glasgow G13 1DN Scotland UK
PH: 603 886-4100
FX: 603 886-4115
email: [email protected]
PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884