12,15 5,85 Ansaughaube 8,95 Verpackt im Gurt nach DIN IEC 60286-3 4,6 hood Tape on Reel Packaging according to DIN IEC 60286-3 Verpackungseinheit: 220 Stück 14,3 12,8 14,95 2,75 1,5 Packaging unit: 220 pcs 330 0,6 11 Abspulrichtung - Reel off Direction 0,8 0,65 0,5 3,675 16 a1 ohne Ansaughaube 12,15 32 without hood a5 2 a1 4x2=8 Anforderungsstufe 1 Leiterplatten-Layout Vorschlag / PCB-layout proposal Kontaktbereich vergoldet 11 ±0,03 0,85 Mating Area gold plating 3x3=9 3 1) 0,8 0,65 0,9 ±0,03 Performance Level 1 1) Anschlussbereich verzinnt 4-6 µm 0,7 ±0,03 Terminal Area 4-6 µm tin plating 0,8 2 1,5 0,85 4x2=8 1) Durchmesser des Bohrers / Drill tool Coplanarity Area of Termination ≤ 0,1 mm Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 2,6 4,45 0,75 Koplanarität der Anschlüsse ≤ 0,1 mm Tolerances Information: Scale 5:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Messerleiste SMD, Powerm. 9mm Male Con. SMD, Powerm. 9mm 214551 www.ERNI.com l 07.02.2014 Index Date Class MSPEED I A3