v01.0806 LC4 – 4 x 4 mm QFN CERAMIC HIGH FREQUENCY SMT PACKAGE PACKAGE OUTLINES Suggested LC4 PCB Land Pattern NOTES: 1. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 2. PAD WIDTH SHOWN IS FOR SOLDERING ONLY. BEYOND SOLDERING AREA ALL CONDUCTORS THAT CARRY RF AND MICROWAVE SIGNALS SHOULD HAVE 50 OHM CHARACTERISTIC IMPEDANCE. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com B - 67 v00.0106 LC4B – 4 x 4 mm QFN CERAMIC HIGH FREQUENCY SMT PACKAGE PACKAGE OUTLINES Suggested LC4B PCB Land Pattern NOTES: 1. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 2. PAD WIDTH SHOWN IS FOR SOLDERING ONLY. BEYOND SOLDERING AREA ALL CONDUCTORS THAT CARRY RF AND MICROWAVE SIGNALS SHOULD HAVE 50 OHM CHARACTERISTIC IMPEDANCE. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com B - 69