SMPS Capacitors Chip Assemblies CH/CV - Radial, Dual-in-Line, 4 Terminal/SMT ‘J’ & ‘L’ Ranges 10nF to 180 μF BS9100 approved 50V to 500 VDC Low ESR/ESL -55ºC to +125ºC 1B/C0G and 2C1/X7R Dielectrics This range allows SMPS engineers to select the best volumetric solution for input and output filter applications in high reliability designs. Utilizing advanced multilayer ceramic techniques to minimize ESR/ESL giving high current handling properties appropriate for filtering, smoothing and decoupling circuits. ELECTRICAL SPECIFICATIONS Temperature Coefficient CECC 30 000, (4.24.1) 1B/C0G: A Temperature Coefficient - 0 ± 30 ppm/ºC, -55º to +125ºC 2C1/X7R: C Temperature Characteristic - ± 15%, -55º to +125ºC Dielectric Withstanding Voltage 25°C (Flash Test) 1B/C0G & 2C1/X7R: 250% rated voltage for 5 seconds with 50 mA max charging current. (500 Volt units @ 150% rated voltage) Capacitance Test 25ºC 1B/C0G: Measured at 1 VRMS max at 1KHz (1MHz for 100 pF or less) 2C1/X7R: Measured at 1 VRMS max at 1KHz Life Test (1000 hrs) CECC 30 000 (4.23) 1B/C0G & 2C1/X7R: 200% rated voltage at +125ºC. (500 Volt units @ 120% rated voltage) Dissipation Factor 25°C 1B/C0G: 0.15% max at 1KHz, 1 VRMS max (1MHz for 100 pF or less) 2C1/X7R: 2.5% max at 1KHz, 1 VRMS max Damp Heat IEC 68-2-3, 56 days. Insulation Resistance 25°C 1B/C0G & 2C1/X7R: 100K megohms or 1000 megohms-μF, whichever is less Resistance to Solder Heat IEC 68-2-20 Dielectric Withstanding Voltage 25°C (Flash Test) 1B/C0G & 2C1/X7R: 250% rated voltage for 5 seconds with 50 mA max charging current. (500 Volt units @ 150% rated voltage) Thermal Shock IEC 68-2-14 -55ºC to +125ºC, 5 cycles Vibration IEC 68-2-6 10Hz - 2000Hz, 0.75mm or 98m/sec2, 6 hrs. Bump IEC 68-2-29 390m/sec2, 4000 bumps MARKING CH and CV 4x, 5x, 81-84 A5C 225K xxxxxx Top line A (AVX). Voltage code, dielectric code. Middle line capacitance code, tolerance code. Bottom line 6 digit batch code. Other CH, CV Styles AVX 5C 156M xxxxxx 36 Top line AVX. Second line voltage code, dielectric code. Third line capacitance code, tolerance code. Bottom line, 6 digit batch code. SMPS Capacitors (CV Style) Chip Assemblies VERTICALLY MOUNTED RADIAL PRODUCT DIMENSIONS Part Number format (CVxxxxxxxxxxxA2) Typical Part Number CV525C106MA30A2 T Max. millimeters (inches) L (max) Style CV41-44 CV51-54 CV61-64 CV71-74 CV76-79 L Max. H Max. 10.6 11.9 16.5 17.8 22.7 H (max) (0.417) (0.468) (0.649) (0.700) (0.893) 8.7 10.7 13.6 21.6 16.6 S (nom) (0.342) (0.421) (0.535) (0.850) (0.653) 8.2 10.2 15.2 15.2 21.2* (0.322) (0.400) (0.600) (0.600) (0.834) Lead Dia (nom) 0.7 (0.028) 0.9 (0.035) 0.9 (0.035) 0.9 (0.035) 0.9 (0.035) *Tolerance ± 0.8 millimeters (inches) 25 (0.984) ±3 (0.118) Style Lead Dia. See Table T max CV41/51/61/71/76 CV42/52/62/72/77 CV43/53/63/73/78 CV44/54/64/74/79 S ±0.5 (0.020) 3.80 7.40 11.1 14.8 (0.150) (0.291) (0.437) (0.583) VERTICALLY MOUNTED 4 TERMINAL RADIAL PRODUCT Part Number format (CVxxxxxxxxx3xx4) DIMENSIONS Typical Part Number CV435C106MA30A4 T Max. L (max) Style M1 = M2 ±0.5 (0.020) H Max. millimeters (inches) L Max. CV43-44 CV53-54 CV63-64 CV73-74 CV78-79 10.6 11.9 16.5 17.8 22.7 H (max) (0.417) (0.468) (0.649) (0.700) (0.893) 8.7 10.7 13.6 21.6 16.6 (0.342) (0.421) (0.535) (0.850) (0.653) Lead Dia (nom) 0.7 (0.028) 0.9 (0.035) 0.9 (0.035) 0.9 (0.035) 0.9 (0.035) S (nom) 8.2 10.2 15.2 15.2 21.2* (0.322) (0.400) (0.600) (0.600) (0.834) *Tolerance ± 0.8 (0.031) 25 (0.984) ±3 (0.118) M2 M1 S1 ±0.5 (0.020) Lead Dia. See Table millimeters (inches) Style S1 ±0.5 (0.020) CV43/53/63/73/78 CV44/54/64/74/79 T max S1 11.1 (0.437) 14.8 (0.583) 5.08 (0.200) 7.62 (0.300) Note 1. This style is only available in 3 & 4 chip assemblies HOW TO ORDER CV Style Code 52 5 C 106 M Size Voltage Dielectric Capacitance Capacitance Code Code Code Code Tolerance (see product section) 5 = 50V 1 = 100V 2 = 200V 7 = 500V A = C0G C = X7R A 3 0 Specification Code Finish Code Lead Dia. Code Lead Space Code Lead Style Code 3 = Uncoated 0 = Standard 8 = Coated (classified as uninsulated) A = Standard 2 = 2 Terminal 4 = 4 Terminal See Note 1 above (2 significant C0G: J = ±5% A = Non-customized digits + no. K = ±10% of zeros) M = ±20% eg. 105 = 1 μF X7R: K = ±10% 106 = 10 μF M = ±20% 107 = 100 μF P = +100, -0% A 2 Note: See page 117 for How to Order BS9100 parts 37 SMPS Capacitors (CH Style) Chip Assemblies HORIZONTALLY MOUNTED 4 TERMINAL RADIAL PRODUCT DIMENSIONS Part Number format (CHxxxxxxxxx3xx4) Typical Part Number CH782C106MA30A4 L max W max T max 25 (0.984) ±3 (0.118) Lead dia (see table) Style L (max) W (max) S (nom) CH42-44 CH52-54 CH62-64 CH72-74 CH77-79 CH82-84 CH87-89 CH92-94 10.6 (0.417) 11.9 (0.468) 16.5 (0.649) 17.8 (0.700) 22.7 (0.893) 14.1 (0.555) 17.8 (0.700) 22.7 (0.893) 8.7 (0.342) 10.7 (0.421) 13.6 (0.535) 21.6 (0.850) 16.6 (0.653) 38.2 (1.503) 38.2 (1.503) 40.6 (1.598) 8.2 (0.322) 10.2 (0.400) 15.2 (0.600) 15.2 (0.600) 21.2* (0.834) 10.2 (0.400) 15.2 (0.600) 21.2* (0.834) S1 (nom) 5.08 (0.200) 7.62 (0.300) 7.62 (0.300) 15.2 (0.600) 10.2 (0.400) 27.9 (1.100) 27.9 (1.100) 30.5 (1.200) *Tolerance ± 0.8 M2 M1 millimeters (inches) S Lead Dia (nom) 0.7 (0.028) 0.9 (0.035) 0.9 (0.035) 0.9 (0.035) 0.9 (0.035) 0.9 (0.035) 1.0 (0.039) 1.2 (0.047) NOTE: This style is only available in 2, 3 & 4 chip assemblies only S1 ± 0.5 (0.020) M1 = M2 ± 0.5 (0.020) millimeters (inches) Style S ± 0.5 (0.020) T max CH42/52/62/72/77/87/92 CH43/53/63/73/78/88/93 CH44/54/64/74/79/89/94 7.4 (0.291) 11.1 (0.437) 14.8 (0.583) HORIZONTALLY MOUNTED DUAL-IN-LINE PRODUCT DIMENSIONS Part Number format (CHxxxxxxxxxx0A0) Typical Part Number CH615C106MA30A0 W max CH41-44 CH51-54 CH61-64 CH71-74 CH76-79 CH81-84 CH86-89 CH91-94 2.0 (0.079) max T max 13 (0.512) ± 1 (0.039) L2 9.2 10.7 14.9 16.8 21.6 12.0 18.9 24.0 (0.362) (0.421) (0.586) (0.661) (0.850) (0.472) (0.744) (0.944) W (max) 8.7 10.7 13.6 21.6 16.6 38.2 38.2 40.6 S (nom) (0.342) (0.421) (0.535) (0.850) (0.653) (1.503) (1.503) (1.598) 8.2 10.2 14.0 15.2 20.3* 10.2 15.2 20.3* (0.322) (0.400) (0.551) (0.600) (0.800) (0.400) (0.600) (0.800) No. of Leads per side 3 4 5 7 6 14 14 14 *Tolerance ± 0.8 (0.031) S ± 0.5 (0.020) millimeters (inches) Style CH41/51/61/71/76/81/86/91 CH42/52/62/72/77/82/87/92 CH43/53/63/73/78/83/88/93 CH44/54/64/74/79/84/89/94 L1 2.54 (0.100) ± 0.05 (0.002) L (max) Style L max millimeters (inches) Lead width 0.5 (0.020) Lead thickness 0.254 (0.010) L1 = L2 ± 0.5 (0.020) T max 3.8 (0.150) 7.4 (0.291) 11.1 (0.437) 14.8 (0.583) HOW TO ORDER CH Style Code 52 5 C 106 Size Voltage Dielectric Capacitance Capacitance Code Code Code Code Tolerance (see product section) 5 = 50V 1 = 100V 2 = 200V 7 = 500V A = C0G C = X7R A 3 0 Specification Code Finish Code Lead Dia. Code Lead Space Code 3 = Uncoated 0 = Standard 8 = Coated (classified as uninsulated) A = Standard (2 significant C0G: J = ±5% A = Non-customized digits + no. K = ±10% of zeros) M = ±20% eg. 105 = 1 μF X7R: K = ±10% 106 = 10 μF M = ±20% 107 = 100 μF P = +100, -0% Note: See page 117 for How to Order BS9100 parts 38 M A 0 Lead Style Code 0 = Straight dual in line 4 = 4 Terminal SMPS Capacitors (CH Style) Chip Assemblies HORIZONTALLY MOUNTED ‘L’ LEAD SMT PRODUCT DIMENSIONS Part Number format (CHxxxxxxxxxx0A7) Typical Part Number CH411C275KA30A7 L (max) Style W max 2.54 (0.1) ± 0.5 (0.02) T max L max S ± 0.5 (0.02) 2.54 (0.1) ± 0.5 (0.02) millimeters (inches) CH41-44 CH51-54 CH61-64 CH71-74 CH76-79 CH81-84 CH86-89 CH91-94 9.2 10.7 14.9 16.8 21.6 12.0 18.9 24.0 W (max) (0.362) (0.421) (0.586) (0.661) (0.850) (0.472) (0.744) (0.944) 8.7 10.7 13.6 21.6 16.6 38.2 38.2 40.6 No. of Leads per side 3 4 5 7 6 14 14 14 S (nom) (0.342) (0.421) (0.535) (0.850) (0.653) (1.503) (1.503) (1.598) 8.2 10.2 14.0 15.2 20.3* 10.2 15.2 20.3* (0.322) (0.400) (0.551) (0.600) (0.800) (0.400) (0.600) (0.800) *Tolerance ± 0.8 (0.031) NOTE: A ‘L’ lead low profile version (CH....0A5) is available with lead height 1.1 (0.043) max. for single chip assemblies eg. CH415C225MA30A5 L1 L2 Lead width 0.5 (0.020) Lead thickness 0.254 (0.010) L1 = L2 ± 0.5 (0.020) millimeters (inches) Style CH41/51/61/71/76/81/86/91 CH42/52/62/72/77/82/87/92 CH43/53/63/73/78/83/88/93 CH44/54/64/74/79/84/89/94 T max 3.8 (0.150) 7.4 (0.291) 11.1 (0.437) 14.8 (0.583) HORIZONTALLY MOUNTED ‘J’ LEAD SMT PRODUCT Part Number format (CHxxxxxxxxxx0A8) DIMENSIONS Typical Part Number CH411C275KA30A8 L2 L1 2.54 (0.100) ± 0.5 (0.020) T max L max S ± 0.5 (0.020) W max millimeters (inches) L (max) Style CH41-44 CH51-54 CH61-64 CH71-74 CH76-79 CH81-84 CH86-89 CH91-94 9.2 10.7 14.9 16.8 21.6 12.0 18.9 24.0 W (max) (0.362) (0.421) (0.586) (0.661) (0.850) (0.472) (0.744) (0.944) 8.7 10.7 13.6 21.6 16.6 38.2 38.2 40.6 S (nom) (0.342) (0.421) (0.535) (0.850) (0.653) (1.503) (1.503) (1.598) 8.2 10.2 14.0 15.2 20.3* 10.2 15.2 20.3* (0.322) (0.400) (0.551) (0.600) (0.800) (0.400) (0.600) (0.800) No. of Leads per side 3 4 5 7 6 14 14 14 *Tolerance ± 0.8 (0.031) 2.54 (0.100) ± 0.5 (0.020) millimeters (inches) Style CH41/51/61/71/76/81/86/91 CH42/52/62/72/77/82/87/92 CH43/53/63/73/78/83/88/93 CH44/54/64/74/79/84/89/94 NOTE: A ‘J’ lead low profile version (CH....0A3) is available with lead height 1.1 (0.043) max. for single chip assemblies eg. CH515C475MA30A3 Lead width 0.5 (0.020) Lead thickness 0.254 (0.010) L1 = L2 ± 0.5 (0.020) T 3.8 7.4 11.1 14.8 max (0.150) (0.291) (0.437) (0.583) HOW TO ORDER CH Style Code 52 5 C 106 M Size Voltage Dielectric Capacitance Capacitance Code Code Code Code Tolerance (see product section) 5 = 50V 1 = 100V 2 = 200V 7 = 500V A = C0G C = X7R A Specification Code (2 significant C0G: J = ±5% A = Non-customized digits + no. K = ±10% of zeros) M = ±20% eg. 105 = 1 μF X7R: K = ±10% 106 = 10 μF M = ±20% 107 = 100 μF P = +100, -0% 3 0 Finish Code Lead Dia. Code 3 = Uncoated 0 = Standard 8 = Coated (classified as uninsulated) A 7 Lead Space Code Lead Style Code A = Standard 3 = Low profile ‘J’ (single chip) 5 = Low profile ‘L’ (single chip) 7 = ‘L’ Dual in line 8 = ‘J’ Dual in line Note: See page 117 for How to Order BS9100 parts 39 SMPS Capacitors (CH/CV Style) Chip Assemblies C0G DIELECTRIC ULTRA STABLE CERAMIC CH/CV41-44 Styles CH/CV51-54 Styles CH/CV61-64 Styles CH/CV71-74 Styles CH/CV76-79 Styles CH81-84 Styles CH86-89 Styles CH91-94 Styles Voltage DC Cap μF 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 0.01 41 0.012 41 0.015 41 0.018 41 0.022 42 51 0.027 42 51 0.033 41 42 52 0.039 41 42 52 61 0.047 41 41 43 52 61 61 0.056 41 41 43 52 61 0.068 41 41 41 44 51 53 62 71 76 81 0.082 41 41 42 51 53 62 71 76 81 0.1 41 42 42 51 51 54 62 71 76 81 0.12 42 42 42 51 51 52 61 62 72 77 81 86 0.15 42 42 42 51 52 52 61 61 63 72 77 81 86 0.18 42 42 43 51 52 52 61 61 63 72 77 82 86 0.22 42 43 43 52 52 52 61 61 62 64 71 72 76 77 81 82 86 91 0.27 43 43 44 52 52 53 61 62 62 71 71 73 76 76 78 81 81 82 87 91 0.33 43 44 52 53 53 61 62 62 71 71 73 76 76 78 81 81 82 87 91 0.39 44 52 53 54 62 62 62 71 71 72 74 76 76 77 79 81 81 81 83 86 87 92 0.47 53 54 62 62 63 71 71 72 76 76 77 81 81 81 83 86 87 92 0.56 53 62 63 63 71 72 72 76 77 77 81 81 82 84 0.68 54 62 63 64 72 72 72 77 77 77 81 82 82 0.82 63 64 72 72 73 77 77 78 82 82 82 86 86 87 89 1 63 64 72 72 73 77 77 78 82 82 82 86 87 87 91 91 93 64 72 73 74 91 91 92 94 1.2 86 86 88 92 86 86 86 88 92 91 93 77 78 79 82 82 83 87 87 87 1.5 73 73 78 78 82 83 83 87 87 87 91 92 92 1.8 73 74 78 79 83 83 84 87 87 88 92 92 92 2.2 74 79 83 84 87 88 88 92 92 92 84 88 88 89 92 92 93 2.7 3.3 88 89 92 93 93 3.9 89 93 93 94 4.7 93 94 5.6 94 NB Figures in cells refer to size within ordering information 40 SMPS Capacitors (CH/CV Style) Chip Assemblies X7R DIELECTRIC STABLE CERAMIC CH/CV41-44 Styles CH/CV51-54 Styles CH/CV61-64 Styles CH/CV71-74 Styles CH/CV76-79 Styles CH81-84 Styles CH86-89 Styles CH91-94 Styles Voltage DC Cap μF 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 0.12 41 0.15 41 0.18 41 0.22 41 0.27 42 51 0.33 41 42 51 0.39 41 42 51 0.47 41 42 51 61 0.56 41 43 52 61 0.68 42 43 51 52 61 0.82 42 44 51 52 61 71 76 81 1 41 42 44 51 53 61 62 71 76 81 41 42 52 53 61 62 71 76 81 1.5 41 43 52 54 61 62 71 76 81 86 1.8 41 41 43 52 61 62 72 77 82 86 2.2 41 41 44 51 52 61 63 71 72 76 77 81 82 86 2.7 41 41 51 53 62 63 71 72 76 77 81 82 87 91 3.3 41 42 51 53 62 64 71 72 76 77 81 82 87 91 3.9 42 42 51 51 54 62 72 73 77 78 81 83 86 87 91 4.7 42 42 51 52 61 62 72 73 77 78 82 83 86 87 91 5.6 42 42 51 52 61 63 72 74 77 79 82 84 86 88 92 6.8 42 43 52 52 61 61 63 8.2 43 43 52 52 61 61 64 10 43 44 52 53 61 62 64 12 44 53 53 62 62 1.2 72 77 82 86 88 92 71 73 76 78 82 87 89 91 92 71 73 76 78 83 87 91 92 71 71 74 76 76 79 81 83 87 92 93 15 53 54 62 62 71 71 76 76 81 81 84 86 87 92 93 18 54 62 63 71 72 76 77 81 81 86 88 92 94 22 54 62 63 72 72 77 77 81 82 86 86 88 92 27 63 64 72 72 77 77 82 82 86 86 89 93 33 63 64 72 73 77 78 82 82 86 87 91 93 39 64 72 73 77 78 82 82 87 87 91 91 94 47 73 74 78 79 82 83 87 87 91 92 56 73 78 83 83 87 87 92 92 68 74 79 82 83 84 87 88 92 92 84 88 88 92 92 100 88 89 92 93 120 89 93 93 150 93 94 180 94 NB Figures in cells refer to size within ordering information 41