View detail for Converting ABEL Design Files to CUPL

Converting ABEL Design Files to CUPL
This application note is intended to assist users in converting designs written in ABELHDL language to CUPL. It also includes an example in ABEL and equivalent representation in CUPL. Atmel ® no longer offers ABEL compilers. Instead users are
encouraged to convert their designs to CUPL and use Atmel Design software tools
such as Atmel-WinCUPL™ or ProChip Designer™.
ABEL/CUPL
Design File
Conversion
Background for ABEL and CUPL
ABEL-HDL and CUPL-HDL are behavioral design languages used to describe logic
circuits at a high level. ABEL evolved over the eighties and early nineties as a language that was written to take advantage of the architectural features of an EPLD. As
late as 1995, Atmel continued to offer ABEL V5.1 (DOS-based program). This
required a Dongle (Key from Data I/O™ Corp. WA) to be plugged into the parallel port
of a PC. Subsequently, Atmel offered an EDA package called Atmel-Synario ™ that
included a windows version of the ABEL compiler until the year 2000. Atmel-Synario
V4.11 was an OEM version specific for Atmel EPLDs and ABEL 6.5 (windows version)
was the last version of ABEL-HDL offered by Atmel as part of this package. Subsequently, Data I/O spun off Synario as an EDA company and a little later Synario's
assets became a part of MINC Inc., another EDA Company. MINC then re-sold specific tools from the Synario package to Xilinx®, Inc.
Application
Note
Logical Devices, Inc. developed CUPL and the structure of the language has not
changed much for the last two decades. Atmel offered a DOS version of CUPL until
the late nineties. The most recent DOS version of Atmel-WinCUPL shipped by Atmel
was Rev 4.8. Subsequently a windows version of CUPL (Rev 5.x) was offered and
called Atmel-WinCUPL.
Rev. 3303A–PLD–08/02
1
Compiler and Tool
Options
The CUPL compiler is available in Atmel-WinCUPL Version 5.2.16 software as well as
part of Atmel-ProChip Designer that uses a Third Party tool from Altium™ called Design
Explorer™ 99SE.
For simple designs, users are encouraged to use Atmel-WinCUPL which is a free tool
and available for download from Atmel's website.
The ABEL compiler (Rev. 6.5) used to compile the ABEL example was part of AtmelSynario Version 4.11 software, which is no longer offered.
Process of Conversion of The conversion is presented in the form of a Table (Table 1) and shows comparative
an ABEL Example File to implementation in ABEL and CUPL. Users can first go through this example and then
refer to “Overview of Syntax Differences between ABEL and CUPL” on page 7 for SynCUPL
tax details. Simulation files are not required for every design unless users specifically
want to functionally generate a set of Test Vectors that can be applied on a Third Party
Programmer hardware. The process of writing Test vector files is listed in the section
titled “Converting an ABEL Simulation Input File to CUPL” on page 5.
Please note that in ABEL, it is possible to include Test vectors as part of the main
source file. The ABEL compiler will then extract the test vectors (.TMV) for simulation
purposes and to append the test vectors to the Jedec file.
Description of Example
2
The following example in Table 1 shows how to implement a 4-bit loadable counter that
can count up (from 0-15 in decimal mode) as well as count down (15-0). In this example,
the counter resets to zero if rst is one. If ld is set, then the output (q3..q0) will be set to
the input (d3..d0). If cnten is set, then the counter is enabled and will count up/down
depending on the state of u_d (control pin). If cnten is not set the output will be held to
the last count.
ABEL/CUPL Design File Conversion
3303A–PLD–08/02
ABEL/CUPL Design File Conversion
Table 1. 4-bit Loadable Counter Implementation
ABEL Source File (.ABL)
CUPL Source File (.pld)
Module unicnt
Interface (d3..d0, clk, rst, cnten, ld, u_d -> q3..q0);
Name counter;
PartNo 00 ;
Date
6/30/02;
Revision 01;
Designer Engineer;
Company XYZ;
Assembly None;
Location San Jose;
Device
virtual;
/*See Table 6 for description of each field in the header section*/
Title '4 bit counter with load, reset, count up, count down';
//Constants
X, C, Z = .X., .C., .Z. ;
//Inputs
d3..d0 pin;
clk pin;
rst pin;
cnten pin;
ld pin;
u_d pin;
/* Input */
pin = [d3..0];
pin = clk;
pin = rst;
pin = cnten;
pin = ld;
pin = u_d;
//Output
q3..q0 pin is_type 'reg';
//Counter output, user can choose reg_d to select //D type
registers or reg_t for T-type Registers.
/* Output */
pin = [q3..0];
//Sets
data = [d3..d0]; //Data Set
count = [q3..q0]; //Counter Set
// Forming group of signals into a vector
MODE = [cnten,ld,u_d];
/* Data Set */
field data = [d3..0];
field count = [q3..0]; /* field is a way to group a set of signals */
/* Forming a group of signals into a vector */
field MODE = [cnten,ld,u_d];
// Selecting different modes base on vector values
// possible values are 0, 1, or don't cares
LOAD = (MODE == [X, 1, X]);
HOLD = (MODE == [0, 0, X]);
UP
= (MODE == [1, 0, 1]);
DOWN = (MODE == [1, 0, 0]);
/* Selecting different modes based on vector values possible
values are 0, 1, or don't cares */
load = MODE:'b'X1X;
hold = MODE:'b'00X;
up = MODE:'b'101;
down = MODE:'b'100;
3
3303A–PLD–08/02
Table 1. 4-bit Loadable Counter Implementation (Continued)
ABEL Source File (.ABL)
CUPL Source File (.pld)
Equations
when LOAD then count := data;
// Abel does things sequentially
else when UP then count := count + 1;
// Count up logic
else when DOWN then count := count - 1;
// Count down logic
else when HOLD then count := count;
// Hold otherwise
count.clk = clk; // Assign Flip-Flop clock pin
count.ar = rst; // Assign asynchronous reset for Flip-Flop
END unicnt //This specifies the end of the //equations section of
the module
/* The following will create a Moore FSM where the output will be
a function of the state */
SequenceD count { /* Explicitly choose D-FF, */
$REPEAT i = [0..15] /* This macro will expand from 0 to 15 */
Present 'h'{i} /* similar to case statement for each state */
If !load & up Next 'h'{(i+1)%16}; /* Logic for count up */
If !load & down Next 'h'{((i-1)+16)%16}; /* Logic for count down */
If !load & hold Next 'h'{i}; /* Logic for hold */
$REPEND}
APPEND count.d = load & data; /* This is when we want to load */
count.AR = rst; /* Asynchronous reset */
count.ck = clk;
ABEL Test Vectors
CUPL Test Vectors
test_vectors ([clk, rst, cnten, ld, u_d, data] -> count)
[.c., 1, 0,
0, 0,
0] -> 0;
[.c., 0, 0,
1, 0,
8] ->8 ;
[.c., 0, 1,
0, 1,
8] -> 9;
[.c., 0, 1,
0, 1,
8] -> 10;
[.c., 0, 1,
0, 1,
8] -> 11;
[.c., 0, 1,
0, 1,
8] -> 12;
[.c., 0, 0,
1, 0, 15] -> 15;
[.c., 0, 1,
0, 0, 15] -> 14;
[.c., 0, 1,
0, 0, 15] -> 13;
[.c., 0, 1,
0, 0, 15] -> 12;
[.c., 1, 0,
0, 0, 15] -> 0;
// The abel test vectors can be included in the source code
file(.abl).
See “Converting an ABEL Simulation Input File to CUPL” on
page 5 for further information.
CUPL test vectors cannot be part of the Source file. A separate
(.si) file must be created as described on page 5.
See “Converting an ABEL Simulation Input File to CUPL” on
page 5 for further information.
4
ABEL/CUPL Design File Conversion
3303A–PLD–08/02
ABEL/CUPL Design File Conversion
Converting an ABEL
Simulation Input File
to CUPL
This section describes the features of ABEL and CUPL Simulation input files and the
process of converting an ABEL Simulation input file to a CUPL file. Test vectors must be
created for the simulator to function and they specify the expected functional operation
of a PLD by defining the outputs as a function of the inputs. Test vectors are also used
to do functional testing of a device once it has been programmed, to see if the device
functions as expected.
CUPL
There are two tools within Atmel-WinCUPL that can be used to simulate the test vectors.
•
WinSim® is a windows-based graphical tool used for creating and editing simulator
(.si) input files and for displaying the results of the simulation in the form of a
waveform. The CUPL simulator requires that a CUPL source file be successfully
compiled prior to running simulation. The CUPL compiler generates an intermediate
file (with extension .ABS) that is used by the simulator to run functional simulation.
•
CSIM is a device-specific simulator and VSIM is a virtual simulator (virtual device)
that is text-based and inherently a DOS process. A test specification source file
(filename.si) is the input to CSIM/VSIM. The ATF15xx family of Atmel devices only
runs VSIM.
The source file may be created using a standard text editor in non-document mode. The
source specification file contains three major parts: header information and title block,
ORDER statement and a VECTORS statement.
A .si file must have the same header information as .pld (source) to ensure that the
proper files, including current revision level, are being compared against each other.
Therefore, first copy .pld to .si and then use a text editor to delete everything in .si,
except the header and title block.
ABEL
There are two ways to specify test vectors. The most common method is to place test
vectors in the ABEL source file. If the user decides to use this method, the Project Navigator (Atmel-Synario) will detect the presence of test vectors in the source file and
create a “dummy” test vector file. This file indicates to the system that the actual test
vectors are in the ABEL source file.
The other way to specify test vectors is to create a “real” test vector file by selecting the
"New" menu item in the Source menu and then choosing test vectors. Note that test vector files have the .ABV file extension and must have the same name as the top-level
module. The user must use the Module and End statements exactly as he does when
creating an ABEL source file.
Table 2 shows comparative implementation of describing test vectors for ABEL simulation (.ABV) and CUPL simulation (.SI) for the 4-bit counter.
5
3303A–PLD–08/02
Table 2. Test Vector Description
6
Counter.abv
Counter.si
Module unicnt
"Constants
X, C, Z = .X., .C., .Z.;
//Inputs
d3..d0 pin;
clk pin;
rst pin;
cnten pin;
ld pin;
u_d pin;
//Output
q3..q0 pin istype 'reg';
//Counter output,
//Sets
data = [d3..d0]; //Data Set
count = [q3..q0]; //Counter Set
test_vectors
([clk, rst, cnten, ld, u_d, data] -> count)
[.c., 1, 0,
0, 0,
0] -> 0;
[.c., 0, 0,
1, 0,
8] -> 8;
[.c., 0, 1,
0, 1,
8] -> 9;
[.c., 0, 1,
0, 1,
8] -> 10;
[.c., 0, 1,
0, 1,
8] -> 11;
[.c., 0, 1,
0, 1,
8] -> 12;
[.c., 0, 0,
1, 0,
15] -> 15;
[.c., 0, 1,
0, 0,
15] -> 14;
[.c., 0, 1,
0, 0,
15] -> 13;
[.c., 0, 1,
0, 0,
15] -> 12;
[.c., 1, 0,
0, 0,
15] -> 0;
End
Name counter;
PartNo 00 ;
Date
6/30/02 ;
Revision 01 ;
Designer Engineer ;
Company XYZ ;
Assembly None ;
Location San Jose;
Device
virtual ;
ORDER: clk, rst, cnten, ld, u_d, d3, d2, d1,
d0, q3, q2, q1, q0;
VECTORS:
c 1000 0000 LLLL
c 0010 1000 HLLL
c 0101 1000 HLLH
c 0101 1000 HLHL
c 0101 1000 HLHH
c 0101 1000 HHLL
c 0010 1111 HHHH
c 0100 1111 HHHL
c 0100 1111 HHLH
c 0100 1111 HHLL
c 1000 1111 LLLL
ABEL/CUPL Design File Conversion
3303A–PLD–08/02
ABEL/CUPL Design File Conversion
Overview of Syntax
Differences between
ABEL and CUPL
Reserved Identifiers
(Keywords)
The following section includes various tables that show the syntax differences between
the two languages pertaining to extensions, operators and keywords.
Table 3. Syntax Differences
ABEL Keyword
CUPL Keyword
ASYNCH_RESET
None
CASE
IF (in a CONDITION statement)
DECLARATIONS
None
DEVICE
PARTNO
ELSE
ELSE
END
}
ENDCASE
}
ENDWITH
None
EQUATIONS
None
EXTERNAL
None
FLAG (OBSELETE)
None
FUNCTIONAL_BLOCK
None
FUSES
FUSES
GOTO
PRESENT, NEXT
IF
IF (In a CONDITION statement)
IN
None
INTERFACE
None
ISTYPE
Note 1
LIBRARY
None
MACRO
FUNCTION
MODULE
None
NODE
NODE/PINNODE
OPTIONS
None
PIN
PIN
PROPERTY
PROPERTY (Note 2)
STATE
PRESENT and $DEFINE
STATE_DIAGRAM
SEQUENCE
STATE_REGISTER
No equivalent but can be achieved with FIELD
SYNC_RESET
None
TEST_VECTORS
Generated .SI file
THEN
NEXT
7
3303A–PLD–08/02
Table 3. Syntax Differences (Continued)
ABEL Keyword
CUPL Keyword
TITLE
NAME
TRACE
None
TRUTH_TABLE
TABLE
WHEN
No equivalent but can be replaced by
CONDITION {}
WITH
Notes:
None
1. Instead of using “ISTYPE” in ABEL, one can use a suitable extension in CUPL.
Extensions such as .D (specify input to a D-type flip flop) can be used with any pin
name. The compiler will determine whether it is valid. The ISTYPE statement defines
attributes (characteristics) of signals (pins and nodes) in ABEL. Please refer to Table
4 for further details on ATTRIBUTES. The user should use signal attributes to remove
ambiguities in architecture-independent designs. Even when a device has been specified, using attributes ensures that the design operates consistently if the device is
changed later.
2. Property statements are used specifically for the ATF1500A and the ATF15xx family
of devices to describe specific feature of the device that can be used by the Device
Fitter to generate the appropriate FITTER and Jedec files.
For Example:
Atmel-ABEL defines such as: ATMEL property 'DEDICATED_INPUT ON';
Atmel-CUPL defines such as: Property ATMEL {DEDICATED_INPUT ON};
Table 4. Attributes Table
8
Signal Attributes
Description
'buffer'
No Inverter in Target Device
'collapse'
Collapse (remove) this signal
'com'
Combinational output
'dc'
Unspecified logic is don't care
'invert'
Inverter in Target Device
'keep'
Do not collapse this signal from equations
'neg'
Unspecified logic is 1
'pos'
Unspecified logic is 0.
'retain'
Do not minimize this output. Preserve redundant product
terms
'reg'
Clocked Memory Element
'reg_d'
D Flip-flop Clocked Memory Element
'reg_g'
D Flip-flop Gated Clocked Memory Element
'reg_jk'
JK Flip-flop Clocked Memory Element
'reg_sr'
SR Flip-flop Clocked Memory Element
'reg_t'
T Flip-flop Clocked Memory Element
'xor'
XOR Gate in Target Device
ABEL/CUPL Design File Conversion
3303A–PLD–08/02
ABEL/CUPL Design File Conversion
Comments in ABEL and
CUPL
Number Representation
in Different Bases
ABEL: Comments begin with a double quotation mark (") or double forward slash (//).
CUPL: Comments begin with /* and end with */.
Table 5. Number Representation in Different Bases
Symbol
Header Information
Keywords
Base Name
Base
ABEL
CUPL
Binary
2
^b
‘b’
Octal
8
^o
‘o’
Decimal
10
^d
‘d’
Hexadecimal
16
^h
‘h’
Table 6. Header Information Keywords
ABEL
CUPL
Description
Module
Name
Just a filename.
Title
None
Used to give a title or description for the
module. (Optional)
None
Partno
The part number for the particular PLD
design.
None
Revision
None
Date
None
Designer
Specify the designer's name.
None
Company
Specify the company's name.
None
Assembly
Give the assembly name or number of the PC
board.
None
Location
The abbreviation LOC can be used.
None
Device
Used to set the default device type for the
compilation.
ABEL
CUPL
Description
!
!
NOT (ones complement)
&
&
AND
#
#
OR
$
$
XOR (exclusive OR)
!$
!$
XNOR (exclusive NOR)
Begin with 01 when first creating a file and
increment each time a file is altered.
Change to the current date each time a
source file is altered.
Logical Operator
Table 7. Logical Operator
9
3303A–PLD–08/02
Arithmetic Operators
CUPL arithmetic operators can only be used inside $REPEAT and $MACRO blocks.
Table 8. Arithmetic Operators
ABEL
CUPL
Description
-
-
Subtraction
+
+
Addition
*
*
Multiplication
/
/
Division
%
%
Modulus
<<
None
Shift left by bits
>>
None
Shift right by bits
Relational Operators
Table 9. Relational Operators
ABEL
CUPL
Description
==
None
Equal
!=
None
Not equal
<
None
Less than
<=
None
Less than or equal
>
None
Greater than
>=
None
Greater than or equal
Assignment Operators
Table 10. Assignment Operators
10
ABEL
CUPL
Set
Description
=
=
ON(1)
Combinational or detailed assignment
:=
=
ON(1)
Implied registered assignment
?=
None
DC(X)
Combinational or detailed assignment
?:=
None
DC(X)
Implied registered assignment
?:=
None
DC(X)
Implied registered assignment
ABEL/CUPL Design File Conversion
3303A–PLD–08/02
ABEL/CUPL Design File Conversion
Operator Priority
Table 11. Operator Priority
Dot Extension
ABEL
CUPL
Priority
Description
-
None
1
Negate
!
!
1
NOT
&
&
2
AND
<<
None
2
Shift left
>>
None
2
Shift right
*
*
2
Multiply
/
/
2
Unsigned division
%
%
2
Modulus
+
+
3
Add
-
-
3
Subtract
#
#
3
OR
$
$
3/4
!$
None
3
XNOR: exclusive NOR
==
None
4
Equal
!=
None
4
Not equal
<
None
4
Less than
<=
None
4
Less than or equal
>
None
4
Greater than
>=
None
4
Greater than or equal
XOR: exclusive OR
The dot extensions valid for pins or specific signals in CUPL as well as ABEL are listed
in Table 12.
Table 12. Dot Extension
ABEL
CUPL
Description
.ACLR
None
Asynchronous clear
.ASET
None
Asynchronous set
.CLK
.CK
.CLR
None
Synchronous clear
.COM
None
Combinational feedback normalized to the pin
value
.OE
.OE
Output enable
.PIN
None
Pin feedback
.SET
None
Synchronous set
.AP
.AP
Asynchronous preset
.AR
.AR
Asynchronous reset
Clock input to an edge-triggered flip-flop
11
3303A–PLD–08/02
Table 12. Dot Extension (Continued)
ABEL
CUPL
.CE
.CE
.D
.D
Data input to a D-type flip-flop
.J
.J
J input to a JK-type flop-flop
.K
.K
K input to a JK-type flip-flop
.LD
None
Register load input
.LE
None
Latch-enable input to a latch
.LH
.LE
Latch-enable (high) to a latch
.PR
.PR
Register preset
.Q
None
.R
.R
.RE
None
.S
.S
S input to an SR-type flip-flop
.SP
.SP
Synchronous register preset
.SR
.SR
Synchronous register reset
.T
.T
Note 1
.CKMUX
.FB (Note 2)
.DFB
D registered feedback path selection
.Q (Note 2)
.DQ
Q output of D-type flip-flop
None
.INT
Internal feedback path for registered macro cell
None
.IO
Pin feedback path selection
None
.IOCK
None
.IOD
Pin feedback path through D register
None
.IOL
Pin feedback path through latch
None
.L
None
.LEMUX
None
.LFB
Latched feedback path selection
None
.LQ
Q output of transparent input latch
None
.OEMUX
None
.TFB
Notes:
12
Description
Clock-enable input to a gated-clock flip-flop
Register feedback
R input to an SR-type flip-flop
Register reset
T input to a T-type (toggle) flip-flop
Clock multiplexer selection
Clock for pin feedback register
D input of transparent latch
Latch enable multiplexer selection
Tri-state multiplexer selection
T registered feedback path selection
1. The .CKMUX dot extension used in CUPL is specific to the Atmel ATV750B and
ATF750C devices. The .CKMUX extension is used to connect the clock input of a register to the Synchronous clock pin. This is needed because some devices have a
multiplexer for connecting the clock to one set of pins.
2. .DFB and .DQ on CUPL are only used for D-type flip-flop. However, .FB and .Q in
ABEL can be used for any type of flip-flops such as D, T, JK, SR flip-flops.
ABEL/CUPL Design File Conversion
3303A–PLD–08/02
ABEL/CUPL Design File Conversion
Extensions Applicable
for Atmel EPLD Devices
Table 13 lists specific extensions valid for Atmel EPLD devices.
Table 13. Valid Atmel EPLD Device Extensions
Atmel PLDs
Valid Extensions
ATF16V8B/BQ/BQL
OE, D
ATF16V8C/CZ
ATF20V8B/BQ/BQL
ATF20V8C/CQ/CQZ
ATF22V10C/CQ/CQZ
OE, D, AR, SP
ATF22LV10C/CZ/CQZ
ATV750/L
D, AR, CK, OE, SP, DFB, IO
ATV750B/BL
D, T, AR, CK, CKMUZ, OE, SP, DFB, IO
ATF750C/CL/LVC/LVCL
ATF1500A/AL/ABV
D, AR, CK, CE, OE, AP, IO, T, L, LE
ATV2500B/BL/BQ/BQL
D, T, AR, CK, OE, SP, IO, CE
ATF2500C/CQ/CQL
ATF1502AS/ASL/ASV/ASVL
ATF1504AS/ASL/ASV/ASVL
D, T, S, R, OE, OEMUX, CK, CKMUX, AR,
DQ, LQ, IO
ATF1508AS/ASL/ASV/ASVL
13
3303A–PLD–08/02
Atmel Headquarters
Atmel Operations
Corporate Headquarters
Memory
2325 Orchard Parkway
San Jose, CA 95131
TEL 1(408) 441-0311
FAX 1(408) 487-2600
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
TEL (41) 26-426-5555
FAX (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
TEL (852) 2721-9778
FAX (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
TEL (81) 3-3523-3551
FAX (81) 3-3523-7581
2325 Orchard Parkway
San Jose, CA 95131
TEL 1(408) 441-0311
FAX 1(408) 436-4314
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
TEL (49) 71-31-67-0
FAX (49) 71-31-67-2340
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131
TEL 1(408) 441-0311
FAX 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
TEL (33) 2-40-18-18-18
FAX (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906
TEL 1(719) 576-3300
FAX 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
TEL (33) 4-76-58-30-00
FAX (33) 4-76-58-34-80
Zone Industrielle
13106 Rousset Cedex, France
TEL (33) 4-42-53-60-00
FAX (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906
TEL 1(719) 576-3300
FAX 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
TEL (44) 1355-803-000
FAX (44) 1355-242-743
e-mail
[email protected]
Web Site
http://www.atmel.com
© Atmel Corporation 2002.
Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty
which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors
which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does
not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted
by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical
components in life support devices or systems.
ATMEL ® is the registered trademark of Atmel; Atmel-WinCUPL ™, Atmel-Synario ™ and ProChip Designer ™ are
the trademarks of Atmel.
Xilinx ® is the registered trademark of Xilinx, Inc. WinSim ® is the registered trademark of WinSim, Inc. Altium ™
and Design Explorer ™ are the trademarks of Altium Limited. Data I/O ™ is the trademark of Data I/O Corporation. Other terms and product names may be the trademarks of others.3303A
Printed on recycled paper.
3303A–PLD–08/02
xM