vlb7 3.3v

VLB7 Series 3.3 V
LVDS VCXO Oscillators
December 2007
• Pletronics’ VLB7 Series is a voltage - quartz
crystal controlled precision square wave
generator with a LVDS output.
• Tape and Reel or cut tape packaging.
•
•
•
•
•
10.9 MHz to 670 MHz
Enable/Disable Function on pad 2
Output frequency is synthesized.
Low Jitter
RoHS 6/6 Compliant
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 2.18 grams or .82 grams or 1.51 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
VCC Supply Voltage
-0.5V to +4.6V
Vi
Input Voltage
-0.5V to VCC + 0.5V
Vo
Output Voltage
-0.5V to VCC + 0.5V
IO
Output Current
-50mA
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2007, Pletronics Inc.
VPB7 Series 3.3 V
LVDS VCXO Oscillators
December 2007
Part Number:
VLB7029036
EG
000
050
- 312.5M
-XX
Packaging code or blank
T250 = 250 per Tape and Reel
T500 = 500 per Tape and Reel
T1K = 1000 per Tape and Reel
Frequency in MHZ
Pullability in ppm (Vcontrol) APR
050 = _
+ 50 ppm minimum is standard
Series Model
Temperature Range
EG = -10 to +70oC
LK = -40 to +85oC
Series Model
Part Marking:
PLE VLB7
FF.FFF M
C YMDXX
Marking Legend:
PLE = Pletronics
FF.FFF M = Frequency in MHZ
YMD = Date of Manufacture (year-month-day)
All other marking is internal factory codes
Codes for Date Code YMD
Code
Year
7
2007
Code
A
JAN
Month
Code
Day
Code
Day
Code
Day
8
2008
9
2009
B
FEB
C
MAR
0
2010
D
APR
E
MAY
1
2011
F
JUN
2
2012
G
JUL
H
AUG
J
SEP
K
OCT
L
NOV
M
DEC
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10
B
11
C
12
D
13
E
14
F
15
G
16
H
17
J
18
K
19
L
20
M
21
N
22
P
23
R
24
T
25
U
26
V
27
W
28
X
29
Y
30
Z
31
www.pletronics.com
425-776-1880
2
VPB7 Series 3.3 V
LVDS VCXO Oscillators
December 2007
Electrical Specification for 3.30V _
+10% over the specified temperature range and the
frequency range of 10.9 MHZ to 670 MHZ
Item
Min
Max
Unit
Condition
Pullability, Absolute Pull Range
-50
+50
ppm
APR includes the effects of supply voltages, load
changes, aging for 1 year, shock, vibration and
temperature.
Output Waveform
LVDS
Output High Level
--
1.60
Volts
Output Low Level
0.90
--
Volts
Differential Output (VOD)
250
450
mVolts
1.125
1.375
Volts
Differential Output Error (dVOS)
--
50
mVolts
Output Symmetry
47
53
%
Referenced to 50% of amplitude or
crossing point
Output TRISE and TFALL
150
230
pS
Vth is 20% and 80% of waveform
-
0.8
pS RMS
-
3.2
-
-20
mA
Vout = 0.0V
Modulation Bandwidth
10
-
KHz
Vcontrol = 1.65V +
_ 1.50 V , -3dB
Vcontrol Resistance (Pad 1)
20
-
Kohm
Voltage vs. Frequency Linearity
-10
+10
%
-
90
mA
50
-
Kohm
To Vcc (equivalent resistance)
V disable
-
0.8
Volts
Referenced to Ground
V enable
2.0
-
Volts
Referenced to Ground
VOUT = VCC
-20
+20
uA
VOUT = 0V
-20
+20
uA
Enable
-
10
nS
Time for output to reach a logic state
Disable time
-
10
nS
Time for output to reach a high Z state
Start up time
-
5
mS
Measured from the time Vcc = 3.0V
Output Offset Voltage (VOS)
Jitter
Output Short Circuit Current
Vcc Supply Current
Enable/Disable
Internal Pull-up
Output leakage
Operating Temperature Range
Storage Temperature Range
See load circuit
R1 = 50 ohms
Measured from 12KHz to 20MHz from Fnominal
Measured from 10Hz to 20MHz from Fnominal
Vcontrol = 1.65V _
+1.50 V
Pad 1 low, device disabled
+70
o
Standard Temperature Range
-40
+85
o
Extended Temperature Range
-55
+125
o
-10
C
C
“E” Option
C
Specifications with Pad 2 E/D open circuit or connected to VCC
www.pletronics.com
425-776-1880
3
VPB7 Series 3.3 V
LVDS VCXO Oscillators
December 2007
Typical Phase-Noise Response
0
-20
dBc/Hz
-40
-60
100MHz dBc/Hz
-80
400MHz dBc/Hz
-100
-120
-140
-160
10
1,000
100,000
10,000,000
Frequency (Hz)
Load Circuit
Test Waveform
Symmetry
Vhigh
Out
80%
50%
20%
Vlow
Out*
Trise
Tfall
Showing Out Measurement only
www.pletronics.com
425-776-1880
4
VPB7 Series 3.3 V
LVDS VCXO Oscillators
December 2007
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
MIL-STD-883 Method 2002, Condition B
Vibration
MIL-STD-883 Method 2007, Condition A
Solderability
MIL-STD-883 Method 2003
Thermal Shock
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
2000
MIL-STD-883 Method 3115
Charged Device Model
1500
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Bar code is 39-Full ASCII
www.pletronics.com
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
425-776-1880
5
VPB7 Series 3.3 V
LVDS VCXO Oscillators
December 2007
Mechanical:
Inches
mm
6
1
5
0.380 +
_ 0.010
9.65 +
_ 0.25
B
0.550 +
_ 0.010
13.97 +
_ 0.25
C
0.177 +
_ 0.010
4.50 +
_ 0.25
D1
0.026 typ.
0.66
E1
0.050
1.27
F1
0.028 R
0.72 R
G1
0.180
4.57
H1
0.100
2.54
I1
0.050
1.27
J1
0.015
0.38
2
A
4
3
FR4 PCB Base:
Solder masked
All via holes tented on bottom
Copper Clad ½ oz. Typical
Gold plated 0.02 µinch (0.5 µm)
Pin 3 Ground plane is typical
Not to scale
Label:
Laser engraved on the 5x7 mm
oscillator that is mounted on the
FR4 base
1
Typical Dimensions
Pad
Function
Note
1
Vcontrol
Modulates the output frequency
2
Output
Enable/Disable
When this pad is not connected the oscillator shall operate.
When this pad is <0.80 volts, the output will be inhibited (high impedance state.)
Recommend connecting this pad to VCC if the oscillator is to be always on.
3
Ground (GND)
4
Output
5
Output*
The outputs must be terminated, 100 ohms between the outputs is the ideal
termination.
Capacitor coupled terminations can be used.
6
Supply Voltage
(VCC)
Recommend connecting appropriate power supply bypass capacitors as close as
possible.
www.pletronics.com
425-776-1880
6
VPB7 Series 3.3 V
LVDS VCXO Oscillators
December 2007
Temperature (°C)
Reflow Cycle (typical for lead free processing)
245°C Maximum
10 Seconds Maximum
250
215°C±10°C
200
175°C±10°C
150
100
Approximately 50 Seconds
120 to 160 Seconds
The part may be reflowed 2 times without degradation.
Allowed rate of temperature change
Maximum 4°C per second
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
Tape
Size
D0
8mm
D1
Min
E1
P0
P2
1.0
T
Max
0.6
0.6
0.1
2.0
+0.05
_
12mm
1.5
1.5
1.75
4.0
16mm
+0.1
-0.0
1.5
_
+0.1
_0.1
+
24mm
T1
Max
S1
Min
2.0
_
+0.1
1.5
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
F
P1
T2
Max
W
Max
Ao, Bo
& Ko
16 mm
12.1
14.25
7.5 +
_0.1
8.0 +
_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
7.0
10.0
13.0
mm
177.8
254.0
330.2
inches
2.50
4.00
3.75
mm
63.5
101.6
95.3
Tape
Width
C
mm
13.0 +0.5 / -0.2
D
mm
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.0
mm
---
---
24.4
+2.0
-0.0
24.0
mm
---
---
32.4
+2.0
-0.0
32.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
7
VPB7 Series 3.3 V
LVDS VCXO Oscillators
December 2007
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a warranty
or endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Tel: 425-776-1880
Fax: 425-776-2760
E-mail: [email protected]
URL: www.pletronics.com
Copyright © 2007, Pletronics Inc.
www.pletronics.com
425-776-1880
8