4) 1 SOT617-3 +9 HVQFN32; Reel pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending ,118 or J Ordering code (12NC) ending 118 Rev. 1 — 2 April 2014 Packing information 1. Packing method Printed plano box Barcode label Reel Tape QA Seal Preprinted ESD warning PQ-label (permanent) Circular sprocket holes opposite the label side of reel Cover tape Carrier tape 001aak603 Fig 1. Reel pack for SMD Table 1. Dimensions and quantities Reel dimensions d w (mm) [1] SPQ/PQ (pcs) Reels per box Outer box dimensions l w h (mm) 330 12.4 6 000 1 339 335 30 [1] d = reel diameter; w = tape width. SOT617-3 NXP Semiconductors HVQFN32; Reel pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending, 118 or J Ordering code (12NC) ending 118 2. Product orientation SLQ DDD Pin 1 is in quadrant x. Fig 2. Product orientation in carrier tape 3. Carrier tape dimensions 4 mm W K0 A0 B0 P1 T direction of feed Fig 3. 001aao148 Carrier tape dimensions Table 2. Carrier tape dimensions In accordance with IEC 60286-3. SOT617-3_118 Packing information A0 (mm) B0 (mm) K0 (mm) T (mm) P1 (mm) W (mm) 5.30 0.1 5.30 0.1 1.10 0.1 0.30 0.05 8.00 0.1 12.00 0.3 All information provided in this document is subject to legal disclaimers. Rev. 1 — 2 April 2014 © NXP Semiconductors N.V. 2014. All rights reserved. 2 of 4 SOT617-3 NXP Semiconductors HVQFN32; Reel pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending, 118 or J Ordering code (12NC) ending 118 4. Reel dimensions A Z W2 B ØC ØD detail Z 001aao149 Fig 4. Schematic view of reel Table 3. Reel dimensions In accordance with IEC 60286-3. SOT617-3_118 Packing information A [nom] (mm) W2 [max] (mm) B [min] (mm) C [min] (mm) D [min] (mm) 330 18.4 1.5 12.8 20.2 All information provided in this document is subject to legal disclaimers. Rev. 1 — 2 April 2014 © NXP Semiconductors N.V. 2014. All rights reserved. 3 of 4 SOT617-3 NXP Semiconductors HVQFN32; Reel pack, SMD, 13" Q1/T1 standard product orientation Orderable part number ending, 118 or J Ordering code (12NC) ending 118 5. Barcode label Fixed text Country of origin i.e. "Made in....." or "Diffused in EU [+] Assembled in...... Packing unit (PQ) identification 2nd traceability lot number* 2nd (youngest) date code* 2nd Quantity* Traceability lot number Date code With linear barcode Quantity With linear barcode Type number NXP 12NC With linear barcode NXP SEMICONDUCTORS MADE IN >COUNTRY< [PRODUCT INFO] (Q) QTY Optional product information* Re-approval date code* Origin code Product Manufacturing Code MSL at the Peak Body solder temperature with tin/lead* MSL at the higher lead-free Peak Body Temperature* 2D matrix with all data (including the data identifiers) HALOGEN FREE (30P) TYPE RoHS compliant (1P) CODENO Additional info if halogen free product Additional info on RoHS (33T) PUID: B.0987654321 (30T) LOT2 (31D) REDATE (30D) DATE2 (32T) ORIG (30Q) QTY2 (31T) PMC (31P) MSL/PBT (1T) LOT MSL/PBT (9D) DATE Lead-free symbol 001aak714 Fig 5. Table 4. Example of typical box and reel information barcode label Barcode label dimensions Box barcode label l w (mm) Reel barcode label l w (mm) 100 75 100 75 Limited warranty and liability © NXP Semiconductors N.V. 2014. Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 2 April 2014 Document identifier: SOT617-3_118 All rights reserved.