Finally Synchronous Inverter - SEPIC - Boost Inverter SEPIC VIN 4.5V to 80V –VOUT Up to 10A VIN BG TG LT8710 FBX VIN 4.5V to 80V 80V VOUT Up to 10A VIN INPUT BG TG LT8710 GND FBX GND 150W Multitopology Synchronous Controller Makes It Possible ® The LT 8710 is a synchronous SEPIC, inverting and boost multitopology DC/DC controller. Its synchronous design uses an NMOS main switch and a PMOS rectifier, increasing efficiency and maximum output current up to 10A without the use of a heat sink. The LT8710’s rail-to-rail output current monitor and control is easily configured for current-limited applications such as battery charging. An input voltage regulation pin allows high impedance sources such as solar panels to power device. Topology Benefits and Features Topology Benefit SEPIC Step Up/Step Down Low Input Noise Inverter Step Up/Down Low Input & Output Noise Boost Step Up High Efficiency Conversion Flyback Step Up/Step Down Multiple Outputs, High Efficiency & Output Current Monitor Additional Features Info & Free Samples www.linear.com/product/LT8710 1-800-4-LINEAR Wide Input Range: 4.5V to 80V Rail-to-Rail Output Current Monitor Input Voltage Regulation for High Impedance Inputs C/10 or Power Good Indicator Switching Frequency up to 750kHz, Synchronizable to an External Clock video.linear.com/171 , LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.