LCA Series Subminiature Snap-acting Switches Features/Benefits • Compact design • Long life and high electrical capacity • Quick connect, solder terminals, PC terminals • Wide variety of actuator styles • RoHS compatible Typical Applications • Motorized equipment • Sump pump • Thermostatic controls 14 Models Available Specifications Materials CONTACT RATING: From low level to 10.1 AMPS @ 125/250 V AC ELECTRICAL LIFE: 10,000 cycles @10.1 AMPS 100,000 cycles @ 6 AMPS MECHANICAL LIFE: 300,000 cycles. INSULATION RESISTANCE: 100 M ohm min. DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level. OPERATING TEMPERATURE: –40ºC to +125ºC OPERATING FORCE: 150 grams at actuator button MAX. Forces are less at free end of lever actuators; (see ACTUATOR’S option sections). MOUNTING: 2-56 screws, torque 2.3 in/lbs max. SWITCH HOUSING: Thermoplastic polyester ACTUATOR BUTTON: Thermoplastic polyester. SPRING: Copper alloy. PIVOT: Copper alloy. MOVABLE CONTACTS: Silver Nickel STATIONARY CONTACTS: Silver nickel on copper alloy. TERMINALS: Copper alloy. ACTUATOR LEVER: Stainless steel. J Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages J-22 thru J-24. For additional options not shown in catalog, consult Customer Service Center. L C A 1 5 0 Series LCA SP, Mom. Contact Rating 06 6 A, 125/250 VAC 6 A, 125/250V µ40T125 10 01 10.1 A, 125/250 VAC 10.1A, 125/250V µ40T125 6 (2)A, 125/250V µ40T125 0.1 A, 125/250 VAC 0.1A, 125/250V µ40T125 14 14 14 Operating Force 150 150 grams Actuator P00 Pin plunger T05 4.8 mm short lever T06 6.8 mm lever T09 8.8 mm lever T12 12.9 mm lever T16 15.6 mm lever T18 18.1 mm lever T21 20.1 mm lever T23 23.4 mm lever T36 36.1 mm lever T43 43.5 mm lever S06 6.0 mm simulated lever S09 9.2 mm simulated lever A05 5.0 mm lever roller Terminations S Solder Q .110 Quick Connect P PC Thru Hole L Left Form PC R Right Form PC Circuitry C SPDT W SPST N.C. Y SPST N.O. Dimensions are shown: mm Specifications and dimensions subject to change J–21 www.ck-components.com Snap-acting NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service center. LCA Series Subminiature Snap-acting Switches SERIES LCA 19.8 7.5 2.0 7.0 2.9 2.5 0.9 2.4 9.5 10.6 3.2 ø 2.5 ø 2.4 R0.3 0.6 8.8 1.9 5.1 1.2 7.3 3.3 9.5 6.4 Snap-acting J ELECTRICAL RATING RoHS COMPLIANT * RoHS COMPATIBLE * OPTION CODE YES YES 06 6A, 125/250 VAC YES YES 10 10.1A, 125/250 VAC YES YES 01 .1A, 125/250 VAC ELECTRICAL RATING * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. OPERATING FORCE OPTION CODE OPERATING FORCES (grams) 150 150 grams max. Dimensions are shown: mm Specifications and dimensions subject to change J–22 www.ck-components.com LCA Series Subminiature Snap-acting Switches ACTUATOR A05 SXX LEVER ROLLER SIMULATED ROLLER 4.9 3.2 B A B 4.05 C A C D E TXX D E P00 LEVER B A J 4.05 D ACTUATOR OPTION CODE P00 T05 T06 T09 T12 T16 T18 T21 T23 T36 T43 S06 S09 A05 2.0 E D E A Br ef.C mm mm mm PRE LENGTH Lever length TRAVEL OF for front mtg. (MAX) LEVER hole to OP NA 16.70 18.70 20.60 24.80 27.10 30.00 32.00 35.20 47.60 55.20 17.90 21.10 16.60 NA 4.80 6.80 9.10 12.90 15.60 18.50 20.50 23.40 36.10 43.50 6.00 9.20 5.00 3.2 C 1.1 3.6 4.0 4.3 5.4 6.0 6.0 6.4 8.6 10.9 13.3 3.9 5.7 3.8 D mm OPERATING POSITION 8.5 ± .0.3 8.9 ± .08 8.9 ± .09 9.15 ± 1.35 8.9 ± 1.5 9.15 ± 1.7 9.15 ± 1.9 9.15 ± 1.85 8.9 ± 2.0 8.85 ± 4.2 8.9 ± 3.0 10.8 ± 0.9 16.1 ± 1.5 14.6 ± 0.8 E Diff. Motion mm mm max FREE POSITION (MAX) Oper. Force max. grams 9.3 11.7 12.0 13.5 13.1 15.2 14.6 15.5 15.6 17.1 19.2 13.76 20.3 17.6 150 50 45 33 34 40 32 35 25 30 15 47 42 50 0.20 0.80 0.90 1.83 1.19 1.30 1.50 1.60 1.80 3.40 2.90 0.86 1.00 0.80 Release Force min. grams 25 6 5 2 2 1 1 1 1 1 1 5 2 6 Over Travel min. 0.4 0.6 0.67 0.75 0.89 0.70 1.2 1.0 1.5 1.0 1.0 0.64 1.0 0.6 Dimensions are shown: mm Specifications and dimensions subject to change J–23 www.ck-components.com Snap-acting 7.5 C LCA Series Subminiature Snap-acting Switches TERMINATIONS Q SOLDER QUICK CONNECT 0.6 10.5 1.6 6.4 S 2.0 3.3 2.8 0.6 L 0.6 2.80 6.0 1.3 0.9 1.2 0.6 3.8 3.3 8.35 R 1.75 RIGHT FORM PC 2.8 1.3 7.0 Snap-acting J LEFT FORM PC 1.75 PC THRU HOLE 6.0 P 0.6 3.8 8.2 7,3 8,8 5,25 COM 3X NO 1,50 1,35 NC PLUNGER POSITION PC MOUNTING Dimensions are shown: mm Specifications and dimensions subject to change J–24 www.ck-components.com LCA Series Subminiature Snap-acting Switches CIRCUITRY C W Y SPDT (Single Pole, Double Throw) SPST N.C. (Single Pole, Single Throw, Normally Closed) SPST N.O. (Single Pole, Single Throw, Normally Open) J Snap-acting Dimensions are shown: mm Specifications and dimensions subject to change J–25 www.ck-components.com