Data Sheet

SFP-1GBT-09
SFP Copper Transceiver 1000Base-X to 1000Base-T
GBIC with SyncE
DESCRIPTION
The Bel SFP-1GBT-09 transceiver is an internally configured 1000Base-T SFP that requires the host system
to provide GBIC interface. The PHY interfaces directly with SerDes interface. The host interface transmits
and receives serial data differentially at 1.25 Gbps. The copper interface is full featured as advertised full/half
duplex and 1000Base-T wire speed.
FEATURES / BENEFITS
•
•
•
•
•
•
•
•
•
•
•
•
•
Designed with Broadcom’s BCM54616S
chipset
Complies with IEEE 802.3, 802.3u, and
802.3ab specifications
Configured for operation with a GBIC
compliant host
Supports SyncE functionality
Conforms to Multi-Source Agreement (MSA)
specifications for SFP transceivers
(Exceptions for SyncE features)
Supports IEEE 802.3u and IEEE 802.3ab
auto–negotiation features to allow networking
equipment to automatically determine and
adjust the required settings
Operates in extended temperature range of
-40° to +85° C
Automatically compensates for baseline
wander by removing the DC offset from the
input signal
Automatic dependent interface (DI)
crossover, eliminating the need for crossover
cables or cross-wire (MDIX) ports
Bail latch provides ease of extraction
Compact RJ45 connector assembly
The BCM54616S physical layer IC (PHY)
can be accessed via I2C interface:
PHY address = “ACh”
EEPROM memory address = “A0h”
The SyncE feature can be accessed via I2C
Interface:
Address = “A2h”
APPLICATIONS
•
•
•
•
•
10/100/1000 Mbps data rate in excess of
100 meters of Category 5/5e cable
Industrial temperature environments -40°
to +85° C
Networking equipment
Switch-to-switch interface
Routers
©2013 Bel Fuse Inc. Specifications subject to change without notice. 03.09.2013
CORPORATE
ASIA
EUROPE
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
Bel Fuse Ltd.
8F / 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Bel Integrated Modules
28 Turkey Court, Turkey Mill
Ashford Road, Maidstone,
Kent ME14 5PP U.K.
Tel +44-1622-757395
Fax +44-1622-663252
www.belfuse.com
1
SFP-1GBT-09
SFP Copper Transceiver 1000Base-X to 1000Base-T
GBIC with SyncE
SFP-1GBT-09 MODULE SPECIFICATIONS
Parameter
Symbol
Min
Typ
Max
Units
Supply Voltage
VDD3
3.12
3.3
3.46
V
Supply Current
IS
TBC
mA
1000Base-T
Supply Current
IS
TBC
mA
10Base-T and
100Base-Tx
SFP Host
Serial Interface
(TX/RX)
Symbol
Line Frequency
FLINE
125
MHz
TX Output Impedance
ZTX_OUT
100
Ω
Differential
RX Output Impedance
ZRX_IN
100
Ω
Differential
25
MHz
4
ns
Min
Clock Frequency
Rise/Fall Time
TR/TF
RMS Phase Jitter
FJ
SyncE
Symbol
Min
Recovered
Clock Jitter
Typ
Typ
Max
Units
1.5
ps-rms
Max
Unit
Notes
Notes
20% - 80%
FJ = 12 kHz to 20 MHz
offset frequency
Notes
±25ppm
Recovered Clock
RCO
125
MHz
Primary Reference
Clock
PRC
25
MHz
Environmental
Specifications
Symbol
Min
Max
Unit
Operating Temp
TOP
-40
+85
°C
Case temperature
Storage Temp
TSTG
-40
+85
°C
Ambient temperature
Typ
Notes
©2013 Bel Fuse Inc. Specifications subject to change without notice. 03.09.2013
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
2
SFP-1GBT-09
SFP Copper Transceiver 1000Base-X to 1000Base-T
GBIC with SyncE
SFP HOST CONNECT ELECTRICAL INTERFACE AND PINS DESCRIPTIONS
2
7
Pin
Name
Description
1
VeeT
Transmitter ground (common with receiver ground).
Normal
Operation
TX Fault
Transmitter fault is internally pulled low.
SyncE
Operation
RCO
Recovered clock output from PHY (125MHz output).
3
TX Disable
Transmit disable. Enable PHY low power mode.
4
MOD-DEF2
Signal SDA (data) of the two-wire serial ID interface.
5
MOD-DEF1
Signal SCL (clock) of the two-wire serial ID interface.
6
MOD-DEF0
This pin is internally tied to transmit ground.
Normal
Operation
Rate Select
Not implemented.
SyncE
Operation
PRC
Primary reference clock (25MHz input).
8
LOS
Loss of signal indication.
9
VeeR
Receiver ground (common with transmitter ground).
10
VeeR
Receiver ground (common with transmitter ground).
11
VeeR
Receiver ground (common with transmitter ground).
12
RD-
Differential reciever outputs. User terminate to 100 Ω differential at
host. AC coupled.
13
RD+
Differential reciever outputs. User to terminate to 100 Ω differential at
host. AC coupled.
14
VeeR
Receiver ground (common with transmitter ground).
15
VccR
3.3V power
16
VccT
3.3V power
17
VeeT
Transmitter ground (common with receiver ground).
18
TD+
Differential transmitter outputs. User to terminate to 100 Ω differential at
host. AC coupled.
19
TD-
User to terminate to 100 Ω differential at host. AC coupled.
20
VeeT
Transmitter ground (common with receiver ground).
©2013 Bel Fuse Inc. Specifications subject to change without notice. 03.09.2013
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
3
SFP-1GBT-09
SFP Copper Transceiver 1000Base-X to 1000Base-T
GBIC with SyncE
DEFAULT CONFIGURATION
Part Number
Link Indicator on
Rx_LOS Pin
Auto-Negotiation
enabled by default
SyncE
Interface
SFP-1GBT-09
Yes
Yes
Disabled
GBIC
(1000Base-X to 1000Base-T)
SYNCE CONFIGURATION
The SFP-1GBT-09 will default to GBIC without SyncE support. In this mode pins 2 and 7 have no function.
SyncE can be configured by writing to address “A2h”, the data byte configuration is:
•
Write SFP data “FFh” (Default):
•
SyncE disabled
Rx_Los
•
High - Linked
•
Low - Not linked
Pin 2 pulled low
Pin 7 not used
Write SFP data “F8h”:
-
SyncE Enabled
Rx_Los
•
High - Not linked or PHY Interrupt
•
Low - Linked
Pin 2 Recovered clock from PHY (125MHz)
Pin 7 Primary reference clock (25MHz)
©2013 Bel Fuse Inc. Specifications subject to change without notice. 03.09.2013
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
4
SFP-1GBT-09
SFP Copper Transceiver 1000Base-X to 1000Base-T
GBIC with SyncE
MECHANICAL
©2013 Bel Fuse Inc. Specifications subject to change without notice. 03.09.2013
CORPORATE
ASIA
EUROPE
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
Bel Fuse Ltd.
8F / 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Bel Integrated Modules
28 Turkey Court, Turkey Mill
Ashford Road, Maidstone,
Kent ME14 5PP U.K.
Tel +44-1622-757395
Fax +44-1622-663252
www.belfuse.com
5