Microwave Single Layer X7S Capacitors Z Dielectric With and Without Borders GENERAL INFORMATION This grain boundary barrier layer (GBBL) system was developed as a replacement for conventional Z5U/Y5V dielectrics. With X7S temperature characteristics, the Z Series offers not only a significant improvement over the TCC of these two dielectrics, but does so over a much wider operating range of -55C to +125°C. Voltage ratings of 50 and 100VDC are available. The Z Series is offered in a range of five dielectric constants (2,500, 5,000, 9,000, 14,000 and 18,000) and products are available with & without borders. CAPACITANCE CHANGE WITH TEMPERATURE 40 X7S Typical Delta Cap (%) 20 Sample kits are available Z Dielectric KIT Catalog # KITSLCZDIESAMPL includes 10 each: GH015Z101MA6N, GH025Z221MA6N, GH035Z471MA6N, GH045Z102MA6N Samples of individual P/N's are also available 0 -20 -40 Z5U -60 -80 Y5V -100 -60 -40 -20 0 20 40 60 Temperature (°C) 80 100 120 140 DIMENSIONS: inches (millimeters) (L) Length GH/GB01 .015±.005 (.381±.127) GH/GB02 GH/GB03 GH/GB04 .025±.005 .035±.005 .050±.010 (.635±.127) (.889±.127) (1.27±.254) .007+.002, -.001 (.178+.051, -.025) .002±.001 (.051±.025) (T) Thickness (B) Border GH/GB05 .070±.010 (1.78±.254) GH/GB06 .090±.010 (2.29±.254) Z DIELECTRIC GH WITHOUT BORDERS Cap (pF) Min Max 20 200 Cap (pF) Min Max 35 470 Cap (pF) Min Max 80 800 Cap (pF) Min Max 150 2000 Cap (pF) Min Max 300 3000 Cap (pF) Min Max 500 4700 Cap (pF) Min Max 70 700 Cap (pF) Min Max 140 1800 Cap (pF) Min Max 280 2700 Cap (pF) Min Max 470 4500 Z DIELECTRIC GB WITH BORDERS Cap (pF) Min Max 20 150 Cap (pF) Min Max 30 390 HOW TO ORDER GH 02 5 Z 102 M A 6N Type Code GH = No Borders GB = With Borders Case Size 01 02 03 04 05 06 Working Voltage Code 5 = 50V 1 = 100V Dielectric Code Z = X7S (k = 2.5K-18K) Capacitance EIA Cap Code in pF Capacitance Tolerance Code K = ±10% M = ±20% Z = +80% -20% Termination Code A = Au (100 µ-in min) over Ti/W (1000 Å nom) also available N = Ti/W-Ni-Au Packaging Code 6N = Antistatic Waffle Pack Note: GH/GB01 & 02 above replace GH/GB10, 15, 20 & 25 and are slightly different dimensionally. Contact factory for details. GH/GB03, 04, 05 & 06 replace GH/GB35, 50, 70 & 90 respectively and are dimensionally identical. 8