Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC316MS8 / 316MS8E v02.0505 Typical Applications Features The HMC316MS8 / HMC316MS8E is ideal for: Conversion Loss: 8 dB • Cellular Basestations LO/RF Isolation: >35 dB • Cable Modems Input IP3: +25 dBm • Fixed Wireless Access Systems Ultra Small Package: <1 mm High 9 • WiMAX Included in the HMC-DK003 Designer’s Kit MIXERS - DBL-BAL - SMT GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 1.5 - 3.8 GHz Functional Diagram General Description The HMC316MS8 & HMC316MS8E are miniature double balanced mixers in 8 lead plastic surface mount packages. The passive GaAs schottky diode mixer implements planar on chip balun transformers, and requires no external components. The mixer can be used as an upconverter, downconverter, or modulator. At mid-band the mixer provides 7.5 dB conversion loss and +25 dBm IIP3 with LO drive levels of +19 dBm. The design was optimized for low cost high volume applications where high converter linearity is required. Electrical Specifi cations, TA = +25° C, As a Function of LO Drive LO = +15 dBm IF = 100 MHz Parameter Min. Typ. LO = +17 dBm IF = 100 MHz Max. Min. Typ. LO = +19 dBm IF = 100 MHz Max. Min. Typ. LO = +19 dBm IF = 500 MHz Max. Min. Typ. Frequency Range, RF & LO 1.6 - 3.2 1.6 - 3.2 1.5 - 3.5 3.3 - 3.8 GHz Frequency Range, IF DC - 1.0 DC - 1.0 DC - 1.0 DC - 1.0 GHz Conversion Loss 8 11 8 10 7.5 11 9.5 dB Noise Figure (SSB) 8 11 8 10 7.5 11 9.5 dB LO to RF Isolation 28 35 32 38 32 42 34 dB LO to IF Isolation 22 27 24 28 26 30 40 dB 20 25 19 25 19 25 25 dBm 12.5 15.5 14 16 14.5 17 17 dBm IP3 (Input) 1 dB Gain Compression (Input) *Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz. 9 - 166 Units Max. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC316MS8 / 316MS8E v02.0505 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 1.5 - 3.8 GHz Conversion Gain vs. Temperature @ LO = +17 dBm Isolation @ LO = +17 dBm 0 RF/IF LO/RF LO/IF -10 -5 ISOLATION (dB) -10 +25 C +85 C -40 C -15 -20 9 -30 -40 -20 -50 1 1.5 2 2.5 3 3.5 4 1 1.5 2 FREQUENCY (GHz) 0 3.5 4 0 -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 3 Return Loss @ LO = +17 dBm Conversion Gain vs. LO Drive -10 +15 dBm +17 dBm +19 dBm -15 -10 -15 RF IF LO -20 -20 -25 1 1.5 2 2.5 3 3.5 4 0 0.5 FREQUENCY (GHz) 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) If Bandwidth @ LO = +17 dBm Upconverter Performance vs. LO Drive 0 0 -5 CONVERSION GAIN (dB) CONVERSION GAIN (dB) 2.5 FREQUENCY (GHz) MIXERS - DBL-BAL - SMT CONVERSION GAIN (dB) 0 -10 -15 -20 -5 -10 +15 dBm +17 dBm +19 dBm -15 -25 -30 -20 0 0.2 0.4 0.6 0.8 1 1.2 1.4 IF FREQUENCY (GHz) 1.6 1.8 2 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 167 HMC316MS8 / 316MS8E v02.0505 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 1.5 - 3.8 GHz Input IP3 vs. Temperature @ LO = +17dBm* 30 25 25 IP3 (dBm) 30 20 +15 dBm +17 dBm +19 dBm 15 20 +25C +85C -40C 15 10 10 1 1.5 2 2.5 3 3.5 4 1 1.5 FREQUENCY (GHz) 2 2.5 3.5 4 3.5 4 Input IP2 vs. Temperature @ LO = +17 dBm* 70 65 65 60 60 IP2 (dBm) 70 55 50 55 50 +15 dBm +17 dBm +19 dBm 45 +25C +85C -40C 45 40 40 1 1.5 2 2.5 3 3.5 4 1 1.5 FREQUENCY (GHz) 2 2.5 3 FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +17 dBm MxN Spurious Outputs 20 nLO mRF 18 P1dB (dBm) 3 FREQUENCY (GHz) Input IP2 vs. LO Drive* IP2 (dBm) MIXERS - DBL-BAL - SMT 9 IP3 (dBm) Input IP3 vs. LO Drive* 16 14 +25C +85C -40C 0 1 2 3 0 xx -8 3.6 1.1 29 1 10 0 22 44 48 2 71 72 77 60 85 3 >110 >110 >110 91 91 4 >110 >110 >110 >110 >110 RF = 2.08 GHz @ -10 dBm LO = 1.9 GHz @ +17 dBm All values in dBc relative to the IF output power. 12 10 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 9 - 168 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 4 HMC316MS8 / 316MS8E v02.0505 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 1.5 - 3.8 GHz Absolute Maximum Ratings RF / IF Input +22 dBm LO Drive +27 dBm Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C IF DC Current ±18 mA ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 9 MIXERS - DBL-BAL - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC316MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC316MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H316 XXXX [2] H316 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 169 HMC316MS8 / 316MS8E v02.0505 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 1.5 - 3.8 GHz Evaluation PCB MIXERS - DBL-BAL - SMT 9 List of Materials for Evaluation PCB 101830 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC316MS8 / HMC316MS8E Mixer PCB [2] 101828 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 9 - 170 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown below. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board as shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC316MS8 / 316MS8E v02.0505 GaAs MMIC HIGH IP3 DOUBLEBALANCED MIXER, 1.5 - 3.8 GHz Notes: MIXERS - DBL-BAL - SMT 9 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 171