DATASHEET HC SERIES ULTRACAPACITORS FEATURES AND BENEFITS* TYPICAL APPLICATIONS Up to 500,000 duty cycles or 10 year life Low internal resistance High power density 1F to 150F capacitance range -40o to 85o C operating temperature range Back-up power for cache-toflash applications Smart Meters Automotive subsystems Consumer and industrial electronics Wireless transmitters PRODUCT SPECIFICATIONS ELECTRICAL Rated Capacitance 1 Minimum Capacitance, initial Maximum ESRDC, initial 1 1 Test Current for Capacitance and ESRDC 1 Rated Voltage (65 /85 C) o o Absolute Maximum Voltage 2 Absolute Maximum Current BCAP0010 BCAP0001 BCAP0003 BCAP0005 1F 3.3 F 5F 10 F 0.8 F 2.6 F 4.0 F 8.0 F 700 mΩ 290 mΩ 170 mΩ 75 mΩ 0.1 A 0.33 A 0.5 A 1A 2.70 / 2.30 V 2.70 / 2.30 V 2.70 / 2.30 V 2.70 / 2.30 V 2.85 V 2.85 V 2.85 V 2.85 V T01/T11/T12 0.8 A 1.9 A 3.2 A 7.2 A 0.006 mA 0.012 mA 0.015 mA 0.030 mA Minimum -40oC -40oC -40oC -40oC Maximum 65o / 85oC 65o / 85oC 65o / 85oC 65o / 85oC Minimum -40oC -40oC -40oC -40oC Maximum 70oC 70oC 70oC 70oC Leakage Current at 25oC, maximum3 TEMPERATURE Operating temperature range (Cell case temperature) Storage temperature range (Stored uncharged) PHYSICAL Mass, typical 1.1 g 1.7 g 2.3 g 3.5 g Terminals Wire Leads Wire Leads Wire Leads Wire Leads Vibration - - - - Shock - - - - *Results may vary. Additional terms and conditions, including the limited warranty, apply at the time of purchase. See the warranty details and enclosed information for applicable operating and use requirements. Page 1 Document number: 1013793.9 maxwell.com DATASHEET HC SERIES ULTRACAPACITORS PRODUCT SPECIFICATIONS (Cont'd) BCAP0025 ELECTRICAL BCAP0050 BCAP0100 T01 BCAP0100 T07 BCAP0150 25 F 50 F 100 F 100 F 150 F 25 F 50 F 100 F 100 F 150 F 42 mΩ 20 mΩ 15 mΩ 15 mΩ 14 mΩ 2.5 A 5A 10 A 10 A 15 A 2.70 / 2.30 V 2.70 / 2.30 V 2.70 / 2.30 V 2.70 / 2.30 V 2.70 / 2.30 V 2.85 V 2.85 V 2.85 V 2.85 V 2.85 V 20 A 27 A 36 A 36 A 40 A 0.045 mA 0.075 mA 0.260 mA 0.260 mA 0.500 mA Minimum -40oC -40oC -40oC -40oC -40oC Maximum 65o / 85oC 65o / 85oC 65o / 85oC 65o / 85oC 65o / 85oC Minimum -40oC -40oC -40oC -40oC -40oC Maximum 70oC 70oC 70oC 70oC 70oC 7.5 g 13 g 23 g 22 g 32 g Terminals Wire Leads Wire Leads Wire Leads Snap In Snap in Vibration - - - - - Shock - - - - - T01/T11 Rated Capacitance1 Minimum Capacitance, initial1 Maximum ESRDC, initial 1 Test Current for Capacitance and ESRDC 1 Rated Voltage (65 /85 C) o o Absolute Maximum Voltage 2 Absolute Maximum Current Leakage Current at 25 C, maximum o 3 TEMPERATURE Operating temperature range (Cell case temperature) Storage temperature range (Stored uncharged) PHYSICAL Mass, typical Page 2 Document number: 1013793.9 maxwell.com DATASHEET HC SERIES ULTRACAPACITORS PRODUCT SPECIFICATIONS (Cont’d) BCAP0010 POWER & ENERGY AT 2.7V BCAP0001 BCAP0003 BCAP0005 Usable Specific Power, Pd 4 1,100 W/kg 1,800 W/kg 2,200 W/kg 3,300 W/kg Impedance Match Specific Power, Pmax 5 2,400 W/kg 3,700 W/kg 4,700 W/kg 6,900 W/kg Specific Energy, Emax 0.9 Wh/kg 2.0 Wh/kg 2.2 Wh/kg 2.9 Wh/kg 0.001 Wh 0.003 Wh 0.005 Wh 0.010 Wh 4A 9A 16 A 36 A UL810a, RoHS UL810a, RoHS UL810a, RoHS UL810a, RoHS 120oC/W 76oC/W 73oC/W 43oC/W Thermal Capacitance (Cth), typical 1.0 J/oC 1.4 J/oC 2.0 J/oC 3.6 J/oC Maximum Continuous Current (ΔT = 15oC)8 0.4 ARMS 0.8 ARMS 1.1 ARMS 2.2 ARMS Maximum Continuous Current (ΔT = 40oC)8 0.7 ARMS 1.3 ARMS 1.8 ARMS 3.5 ARMS 6 Stored Energy, Estored 7,11 T01/T11/T12 SAFETY Short Circuit Current, typical (Current possible with short circuit from rated voltage. Do not use as an operating current.) Certifications TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS Thermal Resistance (Rca, Case to Ambient), typical8 Page 3 Document number: 1013793.9 maxwell.com DATASHEET HC SERIES ULTRACAPACITORS PRODUCT SPECIFICATIONS (Cont’d) POWER & ENERGY AT 2.7V BCAP0025 T01/T11 BCAP0050 BCAP0100 T01 BCAP0100 T07 BCAP0150 Usable Specific Power, Pd 4 2,800 W/kg 3,400 W/kg 2,500 W/kg 2,700 W/kg 2,000 W/kg Impedance Match Specific Power, Pmax5 5,800 W/kg 7,000 W/kg 5,300 W/kg 5,500 W/kg 4,100 W/kg Specific Energy, Emax 6 3.4 Wh/kg 3.9 Wh/kg 4.4 Wh/kg 4.6 Wh/kg 4.7 Wh/kg Stored Energy, Estored 7,11 0.025 Wh 0.051 Wh 0.101 Wh 0.101 Wh 0.152 Wh 64 A 140 A 180 A 180 A 190 A UL810a, RoHS UL810a, RoHS UL810a, RoHS UL810a, RoHS UL810a, RoHS 47oC/W 26oC/W 22oC/W 22oC/W 18oC/W Thermal Capacitance (Cth), typical 6.3 J/oC 13 J/oC 23 J/oC 23 J/oC 32 Maximum Continuous Current (ΔT = 15oC)8 2.8 ARMS 5.4 ARMS 6.7 ARMS 6.7 ARMS 7.7 ARMS Maximum Continuous Current (ΔT = 40oC)8 4.5 ARMS 8.8 ARMS 11 ARMS 11 ARMS 13 ARMS SAFETY Short Circuit Current, typical (Current possible with short circuit from rated voltage. Do not use as an operating current.) Certifications TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS Thermal Resistance (Rca, Case to Ambient), typical8 Page 4 Document number: 1013793.9 maxwell.com DATASHEET HC SERIES ULTRACAPACITORS TYPICAL CHARACTERISTICS (Cont’d) LIFE BCAP0010 BCAP0001 BCAP0003 BCAP0005 1,000 hours 1,000 hours 1,000 hours 1,000 hours Capacitance Change 30% 30% 30% 30% ESR Change 100% 100% 100% 100% 10 years 10 years 10 years 10 years Capacitance Change 30% 30% 30% 30% ESR Change 100% 100% 100% 100% 500,000 cycles 500,000 cycles 500,000 cycles 500,000 cycles Capacitance Change 30% 30% 30% 30% ESR Change 100% 100% 100% 100% Test Current 0.1 A 0.33 A 0.5 A 1.0 A 2 years 2 years 2 years 2 years DC Life at High Temperature (held continuously at Rated Voltage & Maximum Operating Temperature) (% decrease from minimum initial value) (% increase from maximum initial value) Projected DC Life at 25oC 1 (at Rated Voltage & 25oC) (% decrease from minimum initial value) (% increase from maximum initial value) Projected Cycle Life at 25oC1,9,10 (% decrease from minimum initial value) (% increase from maximum initial value) Shelf Life (Stored uncharged at 25oC) ESR AND CAPACITANCE VS TEMPERATURE 180% Capacitance DC ESR Percentage change from value at 25°C 170% 160% 150% 140% 130% 120% 110% 100% 90% 80% -60 -40 -20 0 20 40 Temperature (°C) Page 5 T01/T11/T12 1 Document number: 1013793.9 maxwell.com 60 80 DATASHEET HC SERIES ULTRACAPACITORS TYPICAL CHARACTERISTICS (Cont’d) BCAP0025 T01/ LIFE BCAP0050 BCAP0100 T01 BCAP0100 T07 BCAP0150 1,000 hours 1,000 hours 1,000 hours 1,000 hours 1,000 hours Capacitance Change 30% 30% 30% 30% 30% ESR Change 100% 100% 100% 100% 100% 10 years 10 years 10 years 10 years 10 years Capacitance Change 30% 30% 30% 30% 30% ESR Change 100% 100% 100% 100% 100% 500,000 cycles 500,000 cycles 500,000 cycles 500,000 cycles 500,000 cycles Capacitance Change 30% 30% 30% 30% 30% ESR Change 100% 100% 100% 100% 100% Test Current 2.5 A 5A 10 A 10 A 15 A 2 years 2 years 2 years 2 years 2 years T11 DC Life at High Temperature1 (at Rated Voltage & Maximum Operating Temperature) (% decrease from minimum initial value) (% increase from maximum initial value) Projected DC Life at 25oC1 (at Rated Voltage & 25oC) (% decrease from minimum initial value) (% increase from maximum initial value) Projected Cycle Life at 25oC1,9,10 (% decrease from minimum initial value) (% increase from maximum initial value) Shelf Life (Stored uncharged at 25 oC) NOTES 1. Capacitance and ESRDC measured at 25°C using specified test current per waveform below. 2. Absolute maximum voltage, non-repeated. Not to exceed 1 second. 3. After 72 hours at rated voltage. Initial leakage current can be higher. 0.12V2 4. Per IEC 62391-2, Pd = ESR x mass DC 5. Pmax = 6. Emax = V2 4 x ESRDC x mass ½ CV2 3,600 x mass 7. Estored = ½ CV2 3,600 Page 6 Document number: 1013793.9 maxwell.com 8. ∆T=IRMS2 x ESR x Rca 9. Cycle using specified test current per waveform below. 10. Cycle life varies depending upon application-specific characteristics. Actual results will vary. 11. Per United Nations material classification UN3499, all Maxwell ultracapacitors have less than 10 Wh capacity to meet the requirements of Special Provisions 361. Both individual ultracapacitors and modules composed of those ultracapacitors shipped by Maxwell can be transported without being treated as dangerous goods (hazardous materials) under transportation regulations. DATASHEET HC SERIES ULTRACAPACITORS MOUNTING RECOMMENDATIONS Please refer to the user manual for installation recommendations. BCAP0001, 3, 5,10,25,50,100 (T01) BCAP0010, 25 (T11) Page 7 Document number: 1013793.9 maxwell.com MARKINGS Products are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, negative terminal, warning marking, serial number. DATASHEET HC SERIES ULTRACAPACITORS BCAP0010 (T12) Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. Part Description Dimensions (mm) F R L D d BCAP0001 P270 T01 12 8 0.6 3.8 BCAP0003 P270 T01 20 10 0.6 BCAP0005 P270 T01 20 10 BCAP0010 P270 T01 30 BCAP0010 P270 T11 Package Quantity a b - - - 4,000 5 - - - 4,000 0.6 5 - - - 4,000 10 0.6 5 - - - 3,000 30 10 0.6 5 1.5 10.5 5 1,600 BCAP0010 P270 T12 30 10 0.6 5 1.5 10.5 5 1,600 BCAP0025 P270 T01 26 16 0.8 7.5 - - - 1,300 BCAP0025 P270 T11 26 16 0.8 7.5 2 11.6 8.4 975 BCAP0050 P270 T01 40 18 0.8 7.5 - - - 800 BCAP0100 P270 T01 45 22 1 9.5 - - - 400 Page 8 Document number: 1013793.9 maxwell.com DATASHEET HC SERIES ULTRACAPACITORS BCAP0100, 150 (T07) L Dimensions (mm) D d F Package Quantity BCAP0100 P270 T07 45 22 - - 400 BCAP0150 P270 T07 50 25 - - 400 Part Description Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following U.S. patents and their respective foreign counterparts: 6525924, 6643119, 7295423, 7342770, 7352558, 7384433, 7492571, 7508651, 7791860, 7791861, 7883553, 7935155, 8072734, 8279580, and patents pending. Maxwell Technologies, Inc. Global Headquarters 3888 Calle Fortunada San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301 Maxwell Technologies SA Route de Montena 65 CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Maxwell Technologies, GmbH Leopoldstrasse 244 80807 München Germany Tel: +49 (0)89 / 4161403 0 Fax: +49 (0)89 / 4161403 99 Maxwell Technologies Shanghai Trading Co. Ltd. Unit A2,C 12th Floor Huarun Times Square 500 Zhangyang Road, Pudong New Area Shanghai 200122, P.R. China Phone: +86 21 3852 4000 Fax: +86 21 3852 4099 MAXWELL TECHNOLOGIES, MAXWELL, MAXWELL CERTIFIED INTEGRATOR, ENABLING ENERGY’S FUTURE, BOOSTCAP, C CELL, D CELL and their respective designs and/or logos are either trademarks or registered trademarks of Maxwell Technologies, Inc. and may not be copied, imitated or used, in whole or in part, without the prior written permission Maxwell Technologies, Inc. All contents copyright © 2013 Maxwell Technologies, Inc. All rights reserved. No portion of these materials may be reproduced in any form, or by any means, without prior written permission from Maxwell Technologies, Inc. Page 9 Document number: 1013793.9 maxwell.com Maxwell Technologies Korea Co., Ltd. Room 1524, D-Cube City Office Tower, 15F #662 Gyeongin-Ro, Guro-Gu, Seoul, 152-706 South Korea Phone: +82 10 4518 9829