RV2 CHIP TYPE Aluminum Electolytic Capacitors Chip Type Standard Capacitors Compatible with surface mounting for 5.3mm high capacitors. Supplied with carrier taping. Guarantees 2000 hours at 85℃. ■ SPECIFICATIONS Marking color:Black print Item Performance Category Temperature Range Capacitance Tolerance Leakage Current (A) 40℃~+85℃ 20% (20℃, 120Hz) Less than 0.01CV or 3 whichever is larger (after 2 minutes) C:Rated capacitance (F);V:Rated voltage (V) (20℃) Rated voltage (V) 4 6.3 10 16 25 35 50 3 3 0.42 0.30 0.24 0.22 0.16 0.14 0.12 tan (max.) 4 4 to 6.3 6.3 0.42 0.28 0.24 0.20 0.14 0.12 0.10 Dissipation Factor (Tan at 120Hz, 20℃) Rated voltage (V) Low Temperature Characteristics (at 120Hz) Impedance ratio (max.) 4 4 to 6.3 6.3 Test time Capacitance Change Dissipation Factor Leakage Current Endurance (85℃) (Applied ripple current) 4 7 17 7 15 Z25℃/Z+20℃ Z40℃/Z+20℃ Z25℃/Z+20℃ Z40℃/Z+20℃ 3 3 6.3 4 10 3 8 10 3 8 3 5 16 2 6 2 4 25 2 4 2 3 35 2 3 2 3 50 2 3 2 3 2000 hours (3:1000 hours) Within 20% 20% of initial value (4WV:30%) (4WV 200% or less of the initial specified value (4WV (4WV:300%) The initial specified value or less Test time:1000 hours; other items are the same as those for the endurance. Voltage application treatment treatment:According to JIS C5101-1 Frequency (Hz) 50.60 120 1k 10k.100k Rated voltage (V) 4 to 16 0.80 1 1.15 1.25 25 to 35 0.80 1 1.25 1.40 50 0.80 1 1.35 1.50 JIS C5101-1 1998, -18 1999 (IEC 60384-1 1992, -18 1993) Shelf life (85℃) Coefficient of Frequency for Rated Ripple Current Applicable standards ■ OUTLINE DRAWING C P C Unit:mm D L A B 3 4 5 6.3 5.3 0.2 5.3 0.2 5.3 0.2 5.3 0.2 3.3 4.3 5.3 6.6 3.3 4.3 5.3 6.6 C W P 1.5 0.45 to 0.75 2.0 0.5 to 0.8 2.3 0.5 to 0.8 2.7 0.5 to 0.8 0.8 1.0 1.5 2.0 Casing symbol B55 ― ― ― ■ STANDARD RATINGS 4 Rated voltage (V) Item Rated capacitance (F) 6.3 Case ESR Rated ripple current DL (mm) mArms Case DL (mm) 10 ESR Rated ripple current Case mArms DL (mm) 16 ESR Rated ripple current Case mArms DL (mm) 25 ESR Rated ripple current Case mArms DL (mm) 35 ESR Rated ripple current Case mArms DL (mm) 50 ESR Rated ripple current Case ESR Rated ripple current mArms DL (mm) mArms 905 754 603 503 424 353 199 166 75 50 2 5 3 6 4 7 6 10 15 19 0.22 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 0.33 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 0.47 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 1 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 2.2 3.3 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 8 9 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 11 19 106 70 ─ ─ ─ 57 49 35.3 35.3 4.7 ─ ─ 35.3 45.3 35.3 45.3 35.3 45.3 35.3 45.3 35.3 45.3 45.3 45.3 45.3 42 20 55.3 35 26 23 32 55.3 20 34 6.35.3 17 44 11 7.0 6.4 ─ ─ 55 67 75 ─ ─ 6.35.3 ─ ─ ─ ─ 9.1 ─ ─ ─ ─ 59 ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ 10 ─ ─ ─ ─ ─ ─ 45.3 40 23 22 33 47 100 220 35.3 45.3 45.3 55.3 6.35.3 32 21 15 7.0 3.2 14 31 37 63 110 45.3 55.3 55.3 6.35.3 ─ 21 14 10 5.0 ─ 31 44 52 89 ─ 55.3 55.3 6.35.3 6.35.3 ─ 18 12 8.5 4.0 ─ 39 48 67 98 ─ ─ ─ ─ 35.3 45.3 55.3 6.35.3 6.35.3 6.35.3 ─ 37 33 15 10 7.1 3.3 ─ 18 55.3 26 44 6.35.3 63 6.35.3 75 6.35.3 103 ─ ─ ─ (Note) Rated ripple current:85℃, 120Hz;ESR:20℃, 120Hz 12 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.