Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC-C010 v02.1007 600° Analog Phase Shifter MODULE, 6 - 15 GHz Features Wide Bandwidth: 6 - 15 GHz >600° Phase Shift Single Positive Voltage Control Hermetically Sealed Module Field Replaceable SMA Connectors Typical Applications The HMC-C010 is ideal for: Phase Shifters 6 • Fiber Optics • Military • Test Equipment Functional Diagram -55 to +85 °C Operating Temperature General Description The HMC-C010 is an Analog Phase Shifter which is controlled via an analog control voltage from 0 to +5V. The HMC-C010 provides a continuously variable phase shift of 0 to 800 degrees at 6 GHz, and 0 to 450 degrees at 16 GHz, with consistent insertion loss versus phase shift. The phase shift is monotonic with respect to control voltage. The control port has a modulation bandwidth of 50 MHz. The low insertion loss and extremely robust packaging enable this part to be used in a wide range of applications including the phase adjustment of clocks in fiber optic systems and test equipment. The HMC-C010 is housed in a miniature hermetic module with replaceable SMA connectors. Electrical Specifications, TA = +25° C, 50 Ohm System Parameter 6-1 Frequency (GHz) Min. Typ. Phase Shift Range: 6 - 10 GHz 10 - 15 GHz 600 360 800 600 Insertion Loss 6 - 15 GHz Return Loss (Input and Output) 6 - 15 GHz 7 dB Control Voltage Range 6 - 15 GHz 0-5 Volt Modulation Bandwidth 6 - 15 GHz 50 MHz Phase Voltage Sensitivity 6 - 15 GHz 120 deg /Volt Insertion Phase Temperature Sensitivity 6 - 15 GHz 0.5 deg /°C 7 Max. Units degrees degrees 10 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com dB HMC-C010 v02.1007 600° Analog Phase Shifter MODULE, 6 - 15 GHz Phase Shift vs. Control Voltage Insertion Loss vs. Control Voltage NORMALIZED PHASE SHIFT (degrees) +25C +85C -55C -2 -4 -6 -8 -10 900 6 GHz 11 Ghz 15 GHz 750 600 450 300 150 0 0 1 2 3 4 5 0 1 2 Vctl (Vdc) 4 5 6 Insertion Loss vs. Frequency 0 900 750 INSERTION LOSS (dB) NORMALIZED PHASE SHIFT (degrees) Phase Shift vs. Frequency @ Vctl = 5V (Relative to Vctl = 0V) 600 450 +25C +85C -55C 300 150 -4 -8 0V 1V 2V 3V 4V 5V -12 -16 -20 0 5 6 7 8 9 10 11 12 13 14 15 5 16 6 7 8 9 10 11 12 13 14 15 16 15 16 FREQUENCY (GHz) FREQUENCY (GHz) Input Return Loss vs. Frequency, Vctl = 0 to +5V Output Return Loss vs. Frequency, Vctl = 0 to +5V 0 0 0V 1V 2V -5 3V 4V 5V RETURN LOSS (dB) RETURN LOSS (dB) 3 Vctl (Vdc) Phase Shifters INSERTION LOSS (dB) 0 -10 -15 -20 0V 1V 2V -5 3V 4V 5V -10 -15 -20 5 6 7 8 9 10 11 12 FREQUENCY (GHz) 13 14 15 16 5 6 7 8 9 10 11 12 13 14 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 6-2 HMC-C010 v02.1007 600° Analog Phase Shifter MODULE, 6 - 15 GHz Input IP3 vs. Control Voltage 90 35 75 30 45 30 15 5 0 0 0 1 2 6 3 4 5 0 1 2 Vctl (Vdc) 3 4 5 Vctl (Vdc) Insertion Loss vs. Pin @ 7 GHz Insertion Loss vs. Pin @ 11 GHz 0 0 -1 -2 0V 2V 5V -3 INSERTION LOSS (dB) INSERTION LOSS (dB) Phase Shifters 20 10 6 GHz 11 GHz 15 Ghz 15 -4 -5 -6 -7 -8 -9 0V 2V 5V -2 -4 -6 -8 -10 -11 -15 -10 -5 0 5 10 15 20 -10 -15 25 -10 -5 NORMALIZED PHASE SHIFT (degrees) INSERTION LOSS (dB) 0V 2V 5V -4 -6 -8 -10 -15 -10 -5 0 5 10 INPUT POWER (dBm) 5 10 15 20 25 Phase Shift vs. Pin @ 7 GHz 0 -2 0 INPUT POWER (dBm) INPUT POWER (dBm) Insertion Loss vs. Pin @ 15 GHz 6-3 6 GHz 11 GHz 15 GHz 25 60 IP3 (dBm) 2nd HARMONICS (dBc) Second Harmonics vs. Control Voltage, Pin = -10 dBm 15 20 25 50 40 0V 2V 5V 30 20 10 0 -10 -20 -15 -10 -5 0 INPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 5 HMC-C010 v02.1007 600° Analog Phase Shifter MODULE, 6 - 15 GHz Phase Shift vs. Pin @ 15 GHz 15 0V 2V 5V 10 5 0 -5 -20 -15 -10 -5 0 INPUT POWER (dBm) 5 5 3 1 -1 0V 2V 5V -3 -5 -20 -15 -10 -5 0 INPUT POWER (dBm) Absolute Maximum Ratings Control Voltage (Vctl) -1 Vdc to +8 Vdc Input Power (RFIN) +25 dBm Channel Temperature (Tc) 150 °C Continuous Pdiss (T = 85 °C) (derate 21 mW/°C above 85 °C) 1.36 W Thermal Resistance (junction to ground paddle) 48 °C/W Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class 1B For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 5 6 Phase Shifters 20 NORMALIZED PHASE SHIFT (degrees) NORMALIZED PHASE SHIFT (degrees) Phase Shift vs. Pin @ 11 GHz 6-4 HMC-C010 v02.1007 600° Analog Phase Shifter MODULE, 6 - 15 GHz Outline Drawing Phase Shifters 6 Package Information NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™ 2. BRACKET MATERIAL: ALUMINUM Package Type C-1 Package Weight [1] 10.2 gms [2] ELECTROLYTIC NICKEL 75 MICROINCHES MIN. Spacer Weight N/A 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. [1] Includes the connectors [2] ±1 gms Tolerance 3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER 5. TOLERANCES ±.005 [0.13] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602 - 5CCSF OR EQUIVALENT. 7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80 HARDWARE WITH DESIRED MOUNTING SCREWS. 6-5 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C010 v02.1007 600° Analog Phase Shifter MODULE, 6 - 15 GHz Pin Descriptions Function Description 1 RFIN & RF Ground RF input connector, SMA female, field replaceable. This pin is DC blocked and matched to 50 Ohms. 2 RFOUT & RF Ground RF output connector, SMA female, field replaceable. This pin is DC blocked and matched to 50 Ohms. 3 Vctl Phase shift control pin. Application of a voltage between 0 and 5 volts causes the transmission phase to change. The DC equivalent circuit is a series connected diode and resistor. GND Power supply ground. Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 6 Phase Shifters Pin Number 6-6