PDF Data Sheet

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC536LP2 / 536LP2E
v02.0409
Typical Applications
Features
The HMC536LP2(E) is ideal for:
Input P0.1dB: +33 dBm @ +5V
• Cellular/PCS/3G Infrastructure
Insertion Loss: 0.6 dB
• WiMAX, WiBro & Fixed Wireless
Positive Control: +3V or +5V
• CATV/CMTS
Isolation: 27 dB
• Test Instrumentation
2x2 mm Leadless DFN SMT Package, 4 mm2
Functional Diagram
General Description
The HMC536LP2(E) is a DC to 6 GHz GaAs MMIC T/R
switch in leadless 2x2 mm DFN LP2 surface mount
packages with an exposed ground paddle. The switch
is ideal for cellular, WiMAX, & WiBro access point
and subscriber applications featuring low 0.6 dB insertion loss and high +54 dBm input IP3. Power handling
is excellent up through 6 GHz with the switch offering
a P0.1dB compression point of +29 dBm at +3V and
+33 dBm at +5V control. On-chip circuitry allows
positive voltage control of 0/+3V or 0/+5V at very low
DC currents.
The HMC536LP2(E) occupy only
4 mm2 and are ideal for applications where small size
is required.
SWITCHES - SPDT T/R - SMT
11
Electrical Specifi cations, TA = +25° C, Vctl = 0/+3 Vdc to +5 Vdc, 50 Ohm System
Parameter
Frequency
Insertion Loss
DC - 3.0 GHz
DC - 4.5 GHz
DC - 6.0 GHz
Isolation (RFC to RF1/RF2)
DC - 4.0 GHz
4.0 - 5.0 GHz
5.0 - 6.0 GHz
Return Loss
DC - 3.0 GHz
3.0 - 4.0 GHz
4.0 - 6.0 GHz
Input Power for 0.1 dB Compression
11 - 144
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6 GHz
Min.
23
26
24
Max.
Units
0.6
0.7
1.0
0.9
1.0
1.3
dB
dB
dB
27
30
29
dB
dB
dB
20
20
12
dB
dB
dB
29
33
dBm
dBm
(Vctl = 3V)
(Vctl = 5V)
0.5 - 6.0 GHz
0.5 - 6.0 GHz
Input Third Order Intercept
(Vctl = 3V, 5V)
(Two-Tone Input Power = +7 dBm Each Tone)
0.5 - 1.0 GHz
1.0 - 3.0 GHz
3.0 - 6.0 GHz
54
52
49
dBm
dBm
dBm
Switching Speed
DC - 6.0 GHz
33
70
ns
ns
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
27
31
Typ.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC536LP2 / 536LP2E
v02.0409
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6 GHz
Insertion Loss
Return Loss
0
0
RETURN LOSS (dB)
INSERTION LOSS (dB)
-5
-0.5
-1
+25 C
+85 C
-40 C
-1.5
RFC
RF1
RF2
-10
-15
-20
-25
-30
-2
-35
1
2
3
4
5
6
0
1
FREQUENCY (GHz)
4
5
6
11
Isolation Between Ports RF1 and RF2
0
0
-5
-5
-10
-10
ISOLATION (dB)
ISOLATION (dB)
3
FREQUENCY (GHz)
Isolation Between
Ports RFC and RF1 / RF2
RF1
RF2
-15
-20
-25
-15
RF1-RF2
-20
-25
-30
-30
-35
-35
-40
-40
0
1
2
3
4
5
6
0
1
FREQUENCY (GHz)
2
3
4
5
6
5
6
FREQUENCY (GHz)
Input Third Order
Intercept Point, Vctl = 3v
Input 0.1 dB Compression Point
64
40
60
38
5V
3V
36
56
IP3 (dBm)
INPUT 0.1dB COMPRESSION POINT (dBm)
2
34
32
52
SWITCHES - SPDT T/R - SMT
0
48
+25C
+85C
-40C
30
44
28
40
26
0
1
2
3
4
FREQUENCY (GHz)
5
6
0
1
2
3
4
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 145
HMC536LP2 / 536LP2E
v02.0409
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6 GHz
Control Voltages
Absolute Maximum Ratings
Control Voltage Range
*Control Input Tolerances are ± 0.2V
-0.5 to +7.5V
State
Bias Condition*
Low
0 Vdc @ 25 μA Typical
High
+3 Vdc to +5 Vdc @ 25 μA Typical
Hot Switch Power Level
(Vctl = +3V)
+29 dBm
Channel Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 13.3 mW/°C above 85 °C)
0.86 W
Thermal Resistance
75 °C/W
A
B
Storage Temperature
-65 to +150 °C
Low
High
RF1
Operating Temperature
-40 to +85 °C
High
Low
RF2
ESD Sensitivity (HBM)
Class 1A
Truth Table
Control Input
Signal Path State
RFC to:
DC blocks are required at ports RFC, RF1, RF2.
Choose value for lowest frequency of operation.
Outline Drawing
SWITCHES - SPDT T/R - SMT
11
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC536LP2
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC536LP2E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
536
XXX
[2]
536
XXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 3-Digit lot number XXX
11 - 146
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC536LP2 / 536LP2E
v02.0409
GaAs MMIC POSITIVE CONTROL
T/R SWITCH, DC - 6 GHz
Pin Descriptions
Pin Number
Function
Description
1
A
See truth and control voltage tables.
3
B
See truth and control voltage tables.
2, 4, 6
RFC, RF1, RF2
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
5
N/C
This pin should be connected to
RF ground to achieve best isolation.
GND
Package bottom has exposed metal paddle
that must be connected to RF/DC ground.
Interface Schematic
Evaluation PCB
List of Materials for Evaluation PCB 115195 [1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J4 - J6
DC Pin
C1 - C3
100 pF Capacitor, 0402 Pkg.
R1 - R2
1K Ohm Resistor, 0402 Pkg.
U1
HMC536LP2(E) SPDT Switch
PCB [2]
115194 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application should
be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50
ohm impedance and the package ground leads and
exposed paddle should be connected directly to the
ground plane similar to that shown above. The evaluation circuit board shown above is available from
Hittite Microwave Corporation upon request.
SWITCHES - SPDT T/R - SMT
11
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 147