Surge Protection For Business-Critical ContinuityTM Edco HVCP Series Video Control Power Protection The Edco HVCP-48 is a hybrid surge protection product featuring DC power, data and video protection in one package. Each separate circuit is capable of handling high-current impulses while tightly clamping transients and allowing critical power and data to be transmitted. General Technical Specifications DC Power Protection (VS) Operating Voltage 48 VDC Operating Current 1 Amp Clamping Voltage 70 VDC Total Peak Surge Current Rating SPD Technology Connection 10 kA GDT, SAD, Series Element 5.08mm Terminal Block Plug Features High Speed Data Protection (SDIO) Clamping Voltage Total Peak Surge Current Rating SPD Technology Connection 15 VDC 10 kA GDT, SAD, Series Element 5.08mm Terminal Block Plug Video Protection 2 VDC Total Peak Surge Current Rating 10 kA Connection GDT, SAD, Series Element 5.08mm Terminal Block Plug (-BNC Model) Female BNC Jack Physical Data Ground Wire Size Material Weight Mounting Three separate hybrid circuits Balanced transition circuit Ultra low capacitance, low signal loss Rugged gas tube protection Clamping Voltage SPD Technology Edco HVCP-48 HVCP-48-BNC provides BNC video connections Optional DIN rail assembly (sold separately) 1 Year warranty 12 AWG, 36.0” Long 3.3 L x 3.3 W x 1.35 H (inches) High Impact Plastic 12 oz. Flange mounted, 3.75” mounting hold distance, (.188 dia.) (2x) DIn Rail mounting (Optional) Environmental Operating Temperature Operating Humidity -40˚C to +74˚C 0% to 95% Non-condensing Wiring Terminal Wire Range Torque Strip Length 28-12 AWG 4.5 LB in .28 -.31 in Certifications Environmental Safety Warranty RoHS Compliant UL 497B Listed, Tested to IEC 802.11 1 Year Edco HVCP-48-BNC Installation 1. Mount device as close to protected equipment as possible using mounting flanges (hardware not supplied). 2. Strip all wires going to the field and protected terminal plugs on the device .28-.31 inches. 3. Connect power wire from field side to the field side terminal on device marked "VS+" and "GND" for the ground. 4. Connect data wiring from field to the field side of device marked "SDIO+" and "SDIO-". 5. Connect video wire from field to the field side of device marked "Video +" and "Video-". From -BNC model connect to the "Video In" terminal. 6. Connect protected equipment wiring to all corresponding terminal on the protected side of the device. Optional DIN Mounting Kit, (Sold Separately): Part number: 11852KIT (See IO-50139 for installation instructions) Wiring Diagram Dimensions Emerson Network Power. The global leader in enabling Business-Critical ContinuityTM. AC Power Embedded Computing Outside Plant Racks and Integrated Cabinets Connectivity Embedded Power Power Switching & Control Services DC Power Infrastructure Management & Monitoring Precision Cooling Surge Protection Emerson Network Power Contact information www.emersonnetworkpower.com/surge Headquarters Surge Protection 100 Emerson Parkway Binghamton, NY 13905 T: (607) 721-8840 T: (800) 288-6169 F: (607) 722-8713 E: [email protected] IO-50138 1/12 Rev. 5 Printed in USA Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2012 Emerson Electric Co.