MBR20L150FCT 20A Low VF Trench MOS Schottky Rectifiers - 150V PRIMARY CHARACTERISTICS IO ITO-220 10A×2 VRRM ● Body Marking Example 150V IFSM 150A VF@10A, TJ=125°C 0.68V TJ Max 150℃ PACKAGE VYM Logo Date Code MBR20L10FCT Marking Code Equivalent Circuit Diagram (Samples are usually not indicated Date Code ) V:Product Lines Y:AD late code, EX : 3-2013,4-2014 M:Month, EX : 1-1,2-2,---10-O,11-N,12-D FEATURES MECHANICAL DATA EXTREMELY LOW VF CASE：TRANSFER MOLDED,72 TRENCH MOS SCHOTTKY LEADS：SOLDERABLE PER MIL-STD-202, METHOD 208 TECHNOLOGY LOW POWER LOSS / HIGH POLARITY：AS MARKED EFFICIENCY TERMINALS：PURETIN PLATED HIGH FREQENCY OPERATION HALOGEN FREE HIGH FORWARD SURGE CAPABILITY M2,6785( S(16,7,9,7< L(9(/ 1 MAXIMUM RATINGS (T A =25℃ UNLESS OTHERWISE NOTED ) AND ELECTRICAL CHARACTERISTICS RATINGS SYMBOL MBR20L150FCT MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT SEE FIG.1 PER LEG PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD PER LEG OPERATING JUNCTION TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VRRM VRMS VDC UNITS 150 105 150 20 10 V V V IFSM 150 A TJ TSTG - 55 TO + 150 - 55 TO + 175 ℃ ℃ IO RATINGS SYMBOL MAXIMUM FORWARD VOLTAGE AT IF= 10A TJ =25℃ TJ =125℃ TYPICAL FORWARD VOLTAGE T J =25℃ AT IF= 5A TJ =125℃ MAXIMUM REVERSE CURRENT V R = VRRM @TJ =25℃ PER LEG (NOTE 1) MAXIMUM REVERSE CURRENT V R = VRRM @TJ =125℃ PER LEG (NOTE 1) VF IR A MIN TYP M AX UNITS ----- - 0. 0. 0.0 10 0. 0. --- V mA TYPICAL THERMAL RESISTANCE JUNCTION TO CASE PER LEG Rθjc 4.0 ℃/W ISOLATION VOLTAGE(ITO-220 ONLY)FROM TERMINAL TO HEATSINK T=1MIN VAC 1500 V NOTES ︰ 1. PULSE TEST: 300µS PULSE WIDTH, 1% DUTY CYCLE. 2014.10 www.willas.com.tw Rev.f 01 P1 MBR20L150FCT 20A Low VF Trench MOS Schottky Rectifiers - 150V RATINGS AND CHARACTERISTIC CURVES FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE RATING 20 15 10 MBR20L150FCT 5 0 0 25 5 0 100 1 25 150 175 2 00 PEAK FORWARD SURGE CURRENT AMPERES 150 25 CURRENT AMPERES AVERAGE FORWARD CURRENT RECTIFIED FIG. 1-FORWARD CURRENT DERATING CURVE 8.3 ms Single Half Sine Wave 125 100 75 50 25 0 AMBIENT TEMPERATURE, oC 1 5 10 50 100 NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL INSTANTANEOUS FIG. 3- TYPICAL REVERSE FORWARD CHARCTERISTICS 10.0 Tj=125℃ 1.0 0.1 Tj=100℃ 0.01 Tj=25℃ 0 20 40 60 PERCENT OF RATED VOLTAGE PEAK REVERSE VOLTAGE (%) 2014.10 80 100 INSTANTANEOUS FORWARD CURRENT ,AMPERES INSTANTANEOUS REVERSE CURRENT,MILLIAMPERES CHARACTERISTICS 100 10 Tj=125℃ 1.0 Tj=25℃ 0.1 Pulse Width = 300uS 1% Duty Cycle 0.01 0.1 0.3 0.5 0.7 0.9 1.1 1 .3 1.5 INSTANTANEOUS FORWARD VOLTAGE VOLTS www.willas.com.tw Rev.f 01 P2 MBR20L150FCT 20A Low VF Trench MOS Schottky Rectifiers - 150V Outline Drawing ITO-220 .189(4.80) .406(10.30) .138(3.50) .169(4.30) .118(3.00) .382(9.70) .134(3.40) .114(2.90) .098(2.50) .110(2.54) .642(16.30) .571(14.50) .171(4.35) .067(1.70) .039(1.00) .035(1.00) .022(0.55) .138(3.50) .114(2.90) .098(2.50) .560(14.22) .492(12.50) .031(0.80) .015(0.38) MAX.(1.80) .108(2.75) .091(2.30) Dimensions in inches and (millimeters) Rev.H 2014.10 www.willas.com.tw Rev.f 01 P3 MBR20L150FCT 20A Low VF Trench MOS Schottky Rectifiers - 150V Ordering Information: Device PN MBR20L150FCT - (1)G(2)-WS Packing Tube Packing:50pcs/Tube; 1000pcs/Box Note: 1. Packing code: Empty is Tube Packing 2. RoHS product for packing code suffix ”G”, Halogen free product for packing code suffix "H" . ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. This is the preliminary specification. WILLAS products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2014.10 www.willas.com.tw Rev.f 01 P4