3.2 mm x 5.0 mm Ceramic Package SMD VCXO, LVCMOS / LVPECL / LVDS I640 - Series Product Features Applications Small Surface Mount Package Fast Sample Delivery Frequencies to 1500 MHz Pb Free/ RoHS Compliant Leadfree Processing xDSL Broadcast video Wireless Base Stations Sonet /SDH WiMAX/WLAN Server and Storage Ethernet/LAN/WAN Optical modules Clock and data recovery FPGA/ASIC Backplanes GPON Frequency LVCMOS LVPECL LVDS 10 MHz to 250 MHz 10 MHz to 1500 MHz 10 MHz to 1500 MHz Output Level LVCMOS LVPECL LVDS VOH=90% VDD min., VOL=10 % VDD max. VOH=VDD-1.03V max. (Nom. Load), VOL=VDD-1.6V max. (Nom. Load) VOD=(Diff. Output) 350mV Typ. Duty Cycle LVCMOS LVPECL LVDS Rise / Fall Time LVCMOS LVPECL LVDS Output Load LVCMOS LVPECL LVDS 50% ±5% @ 50%VDD 50% ±5% @ 50%* 50% ±5% @ 50%* 3.0 ns max. (90%/10%)* 0.6 ns max. (80%/20%)* 0.6 ns max. (80%/20%)* Recommended Pad Layout 15pF 50 to VDD - 2.0 VDC RL=100 /CL=10pF Frequency Stability See Table Below Supply Voltage 3.3 VDC ± 10%, 2.5VDC ± 5% Current LVCMOS = 45 mA max., LVPECL = 65 mA max., LVDS = 35 mA max. Linearity 10% max. Pullability See Table Below Control Voltage 1.65 VDC ± 1.65 VDC @ 3.3V 1.25 VDC ± 1.25 VDC @ 2.5V 50K min. Input Impedance Phase Jitter (RMS) At 12kHz to 20 MHz Operating Temp. Range Storage 0.9 ps typical Dimension Units: mm See Table Below -40 C to +100 C Part Number Guide Package I640 Input Voltage Pin Connection 1 Voltage Control 2 Enable/Disable or N/C 3 GND 4 Output 5 Output or N/C 6 VDD Operating Temperature Sample Part Number: Stability (in ppm) Pullabilty Output 3 = 3.3V 1 = 0 C to +70 C F = 20 B = 50 3 = LVCMOS 6 = 2.5V 3 = -20 C to +70 C A = 25 C = 100 8 = LVDS 2 = -40 C to +85 C B = 50 I640–31AB9H2–155.520 Enable / Disable (Pin 2) H = Enable O = N/C Complimentary Ouput (Pin 5) ** Frequency 1 = N.C. 2 = Output 9 = LVPECL -155.520 MHz NOTE: A 0.01 µF bypass capacitor is recommended between VDD (pin 6) and GND (pin 3) to minimize power supply noise. * Measured as percent of waveform. ** Available on LVDS and LVPECL ouput only. ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 11/05/13_F Specifications subject to change without notice Page 1 3.2 mm x 5.0 mm Ceramic Package SMD VCXO, LVCMOS / LVPECL / LVDS I640 - Series SSB Phase Noise (typ.) Offset 10Hz 100Hz 1kHz 10kHz 100kHz 77.76 MHz 155.52 MHz 622.08 MHz -75 dBc/Hz -105 dBc/Hz -117 dBc/Hz -123 dBc/Hz -125 dBc/Hz -62 dBc/Hz -101 dBc/Hz -112 dBc/Hz -115 dBc/Hz -118 dBc/Hz -47 dBc/Hz -79 dBc/Hz -100 dBc/Hz -104 dBc/Hz -106 dBc/Hz Typical Application: Pb Free Solder Reflow Profile: *Units are backward compatible with 240C reflow processes Package Information: MSL = N.A. (package does not contain plastic, storage life is unlimited under normal room conditions). Termination = e4 (Au over Ni over W base metalization). ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 11/05/13_F Specifications subject to change without notice Page 2 3.2 mm x 5.0 mm Ceramic Package SMD VCXO, LVCMOS / LVPECL / LVDS I640 - Series Tape and Reel Information: Quantity per Reel A B C D E F 1000 16 +/-.3 8 +/-.2 7.5 +/-.2 17.5 +/-1 50 / 60 / 80 180 / 250 Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: ILSI and Date Code (YWW) Line 2: Frequency ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 11/05/13_F Specifications subject to change without notice Page 3