2 Lead Plastic Package ZTB Series Product Features: Applications: Low Cost Compatible with Leadfree Processing Storage Media Home Appliance Microprocessors Office Automation 0.91 E Frequency 190 kHz to 1600 kHz ESR (Equivalent Series Resistance) See Table Below Frequency Tolerance @ 25° C ±0.3% Frequency Stability over Temperature ±0.3% Aging ±0.3% Max. for 10 Years A B C Temperature D Operating -40° C to +85° C Storage -40° C to +85° C Standard Dimension Units: mm Part Frequency ESR C1 C2 "A" * "B" * "C" * "D" * (Ω Max.) (pF) (pF) (mm) (mm) (mm) (mm) (mm) ±1 kHz 20 330* 470* 13.5 3.8 14.7 8.0 10.0 250 to 374 ±1 kHz 20 220* 470* 11.0 3.8 9.3 7.0 7.7 ZTB-C 375 to 429 ±2 kHz 20 120* 470* 7.9 3.6 9.3 7.0 5.0 ZTB-D 430 to 519 ±2 kHz 20 100* 100* 7.0 3.5 9.0 ** 5.0 ZTB-E 520 to 699 ±2 kHz 30 100* 100* 7.0 3.5 9.0 ** 5.0 ZTB-F 700 to 999 ±0.5% 30 100* 100* 5.2 2.8 6.8 3.5 2.5 ZTB-G 1000 to 1600 ±0.5% 50 100* 100* 5.2 2.8 6.8 3.5 2.5 Code (KHz) ZTB-A 190 to 249 ZTB-B Tolerance * Recommended external C1 and C2 values. "E" * ** 4.0 mm or 6.0 mm, contact ILSI America. The terminations of the ZTB series ceramic resonator are Pb free. Pb may be contained in the ceramic resonator element of this device and is exempted via item 7 of the RoHS annex. This ceramic resonator series is considered RoHS compliant. Part Number Guide Sample Part Number: Part Series ZTB - ZTB - G - 1000 Part Code Frequency A B C D E F G - 1000 kHz ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 06/09_A Specifications subject to change without notice Page 1 2 Lead Plastic Package ZTB Series Pb Free Solder Reflow Profile: Typical Circuit: *Units are backward compatible with 240C reflow processes Package Information: MSL = 1 Termination = e1 (Sn / Cu / Ag). Environmental Specifications Thermal Shock Moisture Resistance Mechanical Shock Mechanical Vibration Resistance to Soldering Heat Hazardous Substance Solderability Terminal Strength Gross Leak Fine Leak Solvent Resistance MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2007, Condition A J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max) Pb-Free / RoHS / Green Compliant JESD22-B102-D Method 2 (Preconditioning E) MIL-STD-883, Method 2004, Test Condition D MIL-STD-883, Method 1014, Condition C MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s MIL-STD-202, Method 215 Marking Line 1: ILSI Line 2: Frequency ILSI America Phone: 775-851-8880 • Fax: 775-851-8882• e-mail: [email protected] • www.ilsiamerica.com 06/09_A Specifications subject to change without notice Page 2