TECHNICAL CHARACTERISTICS B 4 2 A SPECIFICATION >Rating: 50mA, 12VDC >Contact Resistance: Initial: 100mOHM max. After Life Test: 2OHM max. >Insulation Resistance: min. 100MOHM at 500VDC >Dielectric Strength: 500VAC for 1 minute >Stroke: 0.3 ± 0.1 mm >Bounce 10ms max. 5,08 3 O 1,0 O 1,2 10,16 5,08 1 P.C.B. MOUNTING PLAN MATERIAL >Diffuser plate: >Actuator: >Frame: >Contact: >Terminal: >Rubber: 8,2 3,3 4,05 0,8 5,08 0,9 12,0 Polarity Mark (Cathode) 1 0,8 5,08 10,16 11,0 Switch 2 SOLDERING INFORMATION >Terminal in THT version >Wave soldering 260°C 10 sec. max. >Hand soldering under 350°C for 3 sec. max B A PC UL HB PA66 UL HB PA66 UL HB, color Black Stainless Steel with Ag Brass with Ag Silicone CIRCUIT DIAGRAM 12,0 ENVIRONMENTAL >Storage condition: -40°C ~ +85°C, 60% RH max. >Operation condition: -40°C ~ +85°C >Compliance: ROHS, Reach HANDLING ADVISE >ESD prevention methods need to be applicated for manual handling and processing by machinery >Resistors for protection are obligator LED SCHEMATIC 3 PACKAGING INFORMATION >ESD Tray 4 Scale - 2:1 PN Force 440 RS670 82622 440 GS670 82622 440 BS670 82622 440 YS670 82622 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. Projection 220g ± 50gf 220g ± 50gf 220g ± 50gf 220g ± 50gf GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Basic material Date Drawn 13-10-02 Checked 13-10-02 DESCRIPTION Name Fandrey Hsu WE Würth Elektronik In addition, even electronic component in general electronic equipments, eiCan b revised MatchCode 14-07-28 AL when used in electrical circuits that require high safety, reliability CAD eiCan a Bounce 10ms max. 14-04-14 DaF functions or performance, the sufficient reliability evaluation-check for the FILE DATE BY EDV NO 440xx67082622.dft REV safety must be performed before by the user before usage. Color of LED Life cycle Red Green Blue Yellow 100.000 100.000 100.000 100.000 WS-TATL 12x12mm Tact Switch with integrated LED, THT version Scale 2:1 Position Drawing.- No. 440xx67082622 SIZE A4 System :Solid Edge V20 item 1 2 3 4 5 6 7 8 9 10 11 Emitting color Order code unit Peak wavelength typ. nm Dominant Wave length @IF=20mA typ.nm spectral Line Half-width @IF=20mA typ.nm Capacitance VF=0V;f=1MHZ typ.pF Forward voltage typ. V @IF=20mA max.V Reverse current @VR=5V uA ESD V Viewing Angle @20mA 2θ 50% typ º Luminous intensity min. mcd @IF=20mA typ. mcd Material lens type Yellow YS Red RS bright green VS green GS Blue BS 590 650 574 520 468 590 630 567 525 470 20 28 20 35 21 20 2 2,5 35 1,95 2,5 15 2,1 2,5 100 3,2 4 100 3,2 4 10 2000 10 2000 10 2000 10 1000 10 1000 145 145 145 80 180 AIGaInP water clear 120 220 AIGaInP water clear 145 20 50 AIGaInP water clear 80 150 InGaN water clear HANDLING ADVISE 1) The solder profile has to be complied with according to the technical reflow /or wave soldering specification, otherwise no warranty will be sustained 2) All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not 100% solderability can't be warranted 3) Violation of the technical product specifications such as exceeding the absolute maximum ratings will be result in the loss of warranty 4) It's also recommended to return the products into the original packaging 5) ESD prevention methods need to be applicated for manual handling and processing by machinery 145 20 50 InGaN water clear 6) Resistors for protection are obligatory 7) The standard deliveries include values in the range and limitation as defined in the Electrical & Optical Properties specified in the datasheet.On each reel, only one bin is sorted and taped. The bin is defined on intensity, chromaticity coordinate or wavelength and forward voltage.In order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered.Please contact us in advance, if you need a particular bin sorting before placing your order to clarify the lead time, MOQ and pricing. Absolute Maximun Ratings (Ambient Temperature 25C ) Properties Power Dissipation Peak Forward current continuous Forward current Reverse voltage ESD Threshold / HBM Blue & green Red 120 100 30 5 1000 yellow 75 185 30 5 2000 This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wurth Elektronik must be asked for a written approval. bright green 75 175 30 5 2000 75 150 30 5 2000 Unit mW mA mA V V Projection GENERAL TOLERANCE .x = +/- 0,2 .xx = +/- 0,15 Basic material Date Drawn 13-10-02 Checked 13-10-02 DESCRIPTION Name Fandrey Hsu WE Würth Elektronik In addition, even electronic component in general electronic equipments, eiCan b revised MatchCode 14-07-28 AL when used in electrical circuits that require high safety, reliability CAD eiCan a Bounce 10ms max. 14-04-14 DaF functions or performance, the sufficient reliability evaluation-check for the FILE DATE BY EDV NO 440xx67082622.dft REV safety must be performed before by the user before usage. WS-TATL 12x12mm Tact Switch with integrated LED, THT version Scale 2:1 Position Drawing.- No. 440xx67082622 SIZE A4 System :Solid Edge V20