OPTO OPTICAL-ELECTRIC SENSOR LINEUP ★ Under ■ Distance Measuring Sensor Lineup Output Detected distance 1-bit digital output according to distance measuring Analog voltage output according to distance measuring (Including I2C output) Features Battery drive compatible, compact, 1-bit digital output GP2Y0D805Z0F 10 cm Battery drive compatible, compact, 1-bit digital output GP2Y0D810Z0F GP2Y0D815Z0F 15 cm Battery drive compatible, compact, 1-bit digital output 13 cm 1-bit digital output GP2Y0D413K0F 24 cm 1-bit digital output GP2Y0D21YK0F 80 cm 1-bit digital output GP2Y0D02YK0F 1.5 to 15 cm 2 to 15 cm 4 to 50 cm CMOS type Analog output Analog output GP2Y0AF15 series GP2Y0A51SK0F Analog output GP2Y0A41SK0F / GP2Y0AF30 series Analog output GP2Y0E02A I2C output GP2Y0E02B Analog, I2C output GP2Y0E03 10 to 80 cm Analog output GP2Y0A21YK0F 10 to 150 cm Compact (22 × 8 × 7.2 [T] mm), Analog output GP2Y0A60SZLF 20 to 150 cm Analog output GP2Y0A02YK0F 100 to 550 cm Analog output GP2Y0A710K0F Sensor Unit Lineup Output Analog output Digital output Features Model No. Pulse analog output, single-shot detection of house dust, general purpose GP2Y1010AU0F Single-shot detection of house dust, LED drive via external input, high sensitivity GP2Y1012AU0F Digital (PWM) output, built-in microprocessor controller, single-shot detection of house dust, high sensitivity GP2Y1023AU0F Digital (UART) output, built-in microprocessor controller, sensing can discriminate between PM2.5 and PM10, internal cleaning possible 58 Model No. 5 cm 4 to 30 cm ■ Dust development ★GP2Y1030AU0F OPTO DISTANCE MEASURING SENSORS ■ Distance Measuring Sensors (1) ♦Digital Output GP2Y0D805Z0F 5 GP2Y0D810Z0F 10 GP2Y0D815Z0F 15 GP2Y0D413K0F 13 GP2Y0D21YK0F 24 GP2Y0D02YK0F 80 *1 Vcc = 5 V Absolute maximum ratings Features Light detector, infrared LED and signal processing circuit, short distance measuring type, battery drive compatible (operating power supply: 2.7 to 6.2 V) Light detector, infrared LED and signal processing circuit, short distance measuring type, battery drive compatible (operating power supply: 2.7 to 6.2 V) Light detector, infrared LED and signal processing circuit, short distance measuring type, battery drive compatible (operating power supply: 2.7 to 6.2 V) Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, digital voltage output according to the measured distance Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, digital voltage output according to the measured distance Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, long distance measuring type (No external control signal required), digital voltage output according to the measured distance Electro-optical characteristics*1 Dissipation current VOL (V) Operating Standby MAX. (mA) (µA) Vcc (V) Topr (°C) VOH (V) MIN. –0.3 to +7 –10 to +60 Vcc –0.6 0.6 MAX. 6.5 MAX. 8 –0.3 to +7 –10 to +60 Vcc –0.6 0.6 MAX. 6.5 MAX. 8 –0.3 to +7 –10 to +60 Vcc –0.6 0.6 MAX. 6.5 MAX. 8 –0.3 to +7 –10 to +60 Vcc –0.3 0.6 – – –0.3 to +7 –10 to +60 Vcc –0.3 0.6 MAX. 40 – –0.3 to +7 –10 to +60 Vcc –0.3 0.6 MAX. 50 – ※ PSD: Position Sensitive Detector Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Optoelectronics Model No. Detected distance (cm) (Ta = 25°C) 59 OPTO DISTANCE MEASURING SENSORS ☆ New product ■ Distance Measuring Sensors (2) ♦ Analog Output (Including I2C output) Model No. Distance measuring range (cm) (Ta = 25°C) Absolute maximum ratings Features Vcc (V) Topr (°C) –0.3 to +7 –10 to +60 ☆GP2Y0AF15 series 1.5 to 15 Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, short measuring cycle (16.5 ms), compact, lineup of various connector shapes GP2Y0A51SK0F 2 to 15 Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, short measuring cycle (16.5 ms) –0.3 to +7 –10 to +60 ☆GP2Y0AF30 series 4 to 30 Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, short measuring cycle (16.5 ms), compact, lineup of various connector shapes –0.3 to +7 –10 to +60 GP2Y0A41SK0F 4 to 30 Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, short measuring cycle (16.5 ms) –0.3 to +7 –10 to +60 GP2Y0E02A 4 to 50 –0.3 to +3.6 –10 to +60 GP2Y0E02B 4 to 50 –0.3 to +3.6 –10 to +60 GP2Y0E03 4 to 50 Infrared LED and CMOS image sensor with built-in signal processing circuit, compact size (16.7 × 11 × 5.2 mm), high-precision measurement, analog / I2C output both compatible –0.3 to +5.5 –10 to +60 GP2Y0A21YK0F 10 to 80 Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, linear voltage output –0.3 to +7 –10 to +60 GP2Y0A60SZLF GP2Y0A02YK0F GP2Y0A710K0F Infrared LED and CMOS image sensor with built-in signal processing circuit, compact size (18.9 × 8 × 5.2 mm), high-precision measurement, analog output Infrared LED and CMOS image sensor with built-in signal processing circuit, compact size (18.9 × 8 × 5.2 mm), high-precision measurement, I2C output Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, 10 to 150 compact type (22 x 8 x 7.2 mm), long distance measuring type (No external control signal required) Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, 20 to 150 long distance measuring type (No external control signal required) Distance measuring sensor united with PSD※, infrared LED and signal processing circuit, 100 to 550 long distance measuring type (No external control signal required) –0.3 to +5.5 –10 to +60 –0.3 to +7 –10 to +60 –0.3 to +7 –10 to +60 *1 Vcc = 5 V *2 When Vcc = 3 V: Vo (TYP.) = 0.35 V (at L = 150 cm); ∆Vo (TYP.) = 1.6 V (at L = 150 cm → 20 cm) 60 Electro-optical characteristics*1 Dissipation VOH VOL current (V) (V) Operating MIN. MAX. (mA) VO (TYP.) = 0.4 V (at L = 15 cm), TYP. 17 ∆VO (TYP.) = 2.3 V (at L = 15 cm → 1.5 cm) VO (TYP.) = 0.4 V (at L = 15 cm), TYP. 12 ∆VO (TYP.) = 2.25 V (at L = 15 cm → 2 cm) VO (TYP.) = 0.4 V (at L = 30 cm), TYP. 17 ∆VO (TYP.) = 2.3 V (at L = 30 cm → 4 cm) VO (TYP.) = 0.4 V (at L = 30 cm), MAX. 22 ∆VO (TYP.) = 2.25 V (at L = 30 cm → 4 cm) VOUT (A) 1 = 0.3 to 0.8 V (at L = 50 cm), MAX. 36 VOUT (A) 3 = 2.1 to 2.3 V (at L = 4 cm) D1 = 45 to 50 cm (at L = 50 cm), MAX. 36 D3 = 3 to 5 cm (at L = 4 cm) VOUT (A) 1 = 0.3 to 0.8 V, D1 = 45 to 50 cm (at L = 50 cm), MAX. 36 VOUT (A) 3 = 2.1 to 2.3 V, D3 = 3 to 5 cm (at L = 4 cm) VO (TYP.) = 0.4 V (at L = 80 cm), MAX. 40 ∆VO (TYP.) = 1.9 V (at L: 80 cm → 10 cm) VO (TYP.) = 0.65 V *2 (at L = 150 cm), ∆VO (TYP.) = 3.0 V (at L = 150 cm → 20 cm) VO (TYP.) = 0.4 V (at L = 150 cm), ∆VO (TYP.) = 2.05 V (at L = 150 cm → 20 cm) VO (TYP.) = 2.5 V (at L = 100 cm), ∆VO (TYP.) = 0.7 V (at L = 100 cm → 200 cm) MAX. 50 MAX. 50 TYP. 30 ※ PSD: Position Sensitive Detector Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. DISTANCE MEASURING SENSORS / DUST SENSOR UNIT ★ Under GP2Y0D805Z0F ⎧ ⎫ GP2Y0D810Z0F, ⎜ GP2Y0D815Z0F, ⎜ ⎜ GP2Y0D810Z1F ⎜ ⎩ ⎭ GP2Y0AF30 series ■ Dust GP2Y0E02A (GP2Y0E02B) GP2Y0E03 GP2Y0A60SZLF GP2Y0AF15 series GP2Y0A21YK0F GP2Y0A51SK0F GP2Y0D02YK0F (GP2Y0A02YK0F) GP2Y0A710K0F ⎧ GP2Y0D21YK0F, ⎫ ⎜GP2Y0A41SK0F ⎜ ⎜ ⎜ ⎜GP2Y0D413K0F: ⎜ ⎜without mounting ⎜ ⎩ hole ⎭ Sensor Unit Model No. GP2Y1010AU0F GP2Y1012AU0F GP2Y1023AU0F ★GP2Y1030AU0F development Topr (°C) Features • Built-in infrared emitting diode, photodiode and signal processing circuit • Compact, single-shot detection of house dust • Output: Analog voltage • High sensitivity • Built-in infrared emitting diode, photodiode and signal processing circuit • Compact, single-shot detection of house dust • Output: Analog voltage • High sensitivity • Built-in microcomputer • Built-in infrared emitting diode, photodiode and signal processing circuit • Compact, single-shot detection of house dust • Output: Digital signal output (PWM) • Built-in infrared emitting diode, photodiode and signal processing circuit • Built-in microcomputer • Sensing can discriminate between PM2.5 and PM10 • Internal cleaning possible GP2Y1010AU0F (GP2Y1012AU0F, GP2Y1023AU0F) (Ta = 25°C) Electro-optical characteristics Operating Detection supply voltage Dissipation Output current concentration (V) (mA) μg/m3 (TYP.) 4.5 to 5.5 TYP. 11 0 to 600 Analog voltage 4.5 to 5.5 TYP. 11 0 to 240 Analog voltage 4.75 to 5.25 TYP. 15 0 to 240 Digital signal (PWM) Temperature correction Averaging 3 to 5.5 TYP. 25 0 to 500 Digital signal (UART) –10 to +65 Optoelectronics OPTO GP2Y1030AU0F Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 61