TAE 1453 TAF 1453 Single PNP-Operational Amplifiers Bipolar IC Features ● ● ● ● ● ● ● ● ● PNP input Supply voltage range between 3 V and 36 V Low current consumption, 0.25 mA typ. Extremely large control range Low output saturation voltage, almost independent of load current Output current up to 70 mA (100 mA max.) Wide common-mode range Wide operating temperature range (TAF 1453) Open collector output P-DSO-6-1 Applications ● ● ● ● ● Amplifier Level converter Driver Zero voltage switch Comparator Type Ordering Code Package TAE 1453 G Q67000-A2106 P-DSO-6-1 (SMD) TAF 1453 G Q67000-A2209 P-DSO-6-1 (SMD) These operational amplifiers are circuits for universal applications having a PNP-input differential stage and an open collector output. Apart from one resistor, only active components are used. The integrated regulator provides for all parameters a large degree of independence from the supply voltage. Semiconductor Group 1 01.96 TAE 1453 TAF 1453 Pin Configurations (top view) TAE 1453 G TAF 1453 G Semiconductor Group 2 TAE 1453 TAF 1453 CC = output frequency compensation (if required); RL = load resistance (collector resistance) Connection Diagram Circuit Diagram Semiconductor Group 3 TAE 1453 TAF 1453 Absolute Maximum Ratings (TAE 1453 G) Parameter Symbol Limit Values Unit Supply voltage VS ± 18 V Output current IQ 100 mA Differential input voltage VID ± VS V Junction temperature Storage temperature range Tj Tstg 150 – 55 to 150 °C °C Thermal resistance system - air TAE 1453 G Rth SA 200 K/W Supply voltage VS ± 2 to ± 18 (± 1.5 V with slightly increased offset voltage) V Ambient temperature TA – 25 to 85 °C Operating Range (TAE 1453 G) Characteristics (TAE 1453 G) VS = ± 5 V to ± 15 V; RL = 10 kΩ, unless otherwise specified Parameter Symbol Limit Values TA = 25 °C min. Limit Values TA = – 25 to 85 °C Unit typ. max. min. max. 0.25 0.4 0.45 mA Open-loop current consumption IS Input offset voltage, RG = 50 Ω VIO – 5.5 5.5 –7 7 mV Input offset current Input current IIO II – 15 15 150 – 100 100 200 nA nA Semiconductor Group 40 4 TAE 1453 TAF 1453 Characteristics (TAE 1453 G) (cont’d) VS = ± 5 V to ± 15 V; RL = 10 kΩ, unless otherwise specified Parameter Symbol Limit Values TA = 25 °C min. typ. Limit Values TA = – 25 to 85 °C Unit max. min. max. – 14.7 14.9 – 14.5 14.9 – 10 – 14.7 V – 14.4 V V Control range RL = 2 kΩ, VS = ± 15 V RL = 620 Ω, VS = ± 15 V RL = 2 kΩ, VS = ± 15 V, f = 100 kHz VQ pp VQ pp VQ pp Input impedance, f = 1 kHz ZI Open-loop voltage gain GV0 Output reverse current IQR Common-mode input voltage range VIC Common-mode rejection kCMR Supply voltage rejection GV = 100 kSVR 25 Temperature coefficient of IIO αIIO 0.1 nA/K Temperature coefficient of VIO RG = 50 Ω αVIO 6 µV/K Slew rate for non-inverting operation Slew rate for inverting operation SR 6 3 11 V/µs1) SR 6 3 10 V/µs1) RG = 50 Ω 1) 14.9 14.9 10 200 78 85 78 10 – VS – 0.2 75 Ck = 15 pF Semiconductor Group kΩ 5 VS – VS – 1.8 80 dB 20 µA VS V – 2.0 75 100 dB 120 µV/V TAE 1453 TAF 1453 Characteristics (TAE 1453 G) VS = ± 2.5 V, RL = 10 kΩ Parameter Symbol Limit Values TA = 25 °C min. Input offset voltage, RG = 50 Ω VIO –6 Input offset current Input current IIO II – 15 Open-loop voltage gain GV0 70 typ. 40 Limit Values TA = – 25 to 85 °C max. min. Unit max. 6 – 7.5 7.5 mV 15 150 – 100 nA nA 100 200 70 dB Absolute Maximum Ratings (TAF 1453 G) Parameter Symbol Limit Values Unit Supply voltage VS ± 18 V Output current IQ 100 mA Differential input voltage VID ± VS V Junction temperature Storage temperature range Tj Tstg 150 – 55 to 125 °C °C Thermal resistance system - air TAF 1453 G Rth SA 200 K/W Supply voltage VS ± 2 to ± 18 (± 1.5 V with slightly increased offset voltage) V Ambient temperature TA – 55 to 125 °C Semiconductor Group 6 Operating Range (TAF 1453 G) TAE 1453 TAF 1453 Characteristics (TAF 1453 G) VS = ± 5 V to ± 15 V; RL = 10 kΩ, unless otherwise specified Parameter Symbol Limit Values TA = 25 °C min. Limit Values TA = – 55 to 125 °C Unit typ. max. min. max. 0.25 0.35 0.45 mA Open-loop current consumption (Output in H state) IS Input offset voltage, RG = 50 Ω VIO –4 4 –6 6 mV Input offset current Input current IIO II – 10 10 100 – 75 75 150 nA nA 40 Control range RL = 2 kΩ, VS = ± 15 V VQ pp RL = 620 Ω, VS = ± 15 V VQ pp RL = 2 kΩ, VS = ± 15 V, f = 100 kHz VQ pp 14.9 14.9 10 – 14.7 14.9 – 14.5 14.9 – 10 – 14.7 V – 14.4 V V Input impedance, f = 1 kHz ZI Open-loop voltage gain GV0 Output reverse current IQR Common-mode input voltage range VIC – VS – 0.2 Common-mode rejection kCMR 80 Supply voltage rejection GV = 100 kSVR 25 100 Temperature coefficient of IIO RG = 50 Ω Temperature coefficient of VIO RG = 50 Ω αIIO 0.1 0.8 nA/K αVIO 6 25 µV/K Semiconductor Group 200 80 kΩ 85 75 1 7 dB 5 µA VS – VS VS V – 1.5 + 0.2 – 1.8 85 75 dB 100 µV/V TAE 1453 TAF 1453 Characteristics (TAF 1453 G) VS = ± 2.5 V, RL = 10 kΩ Parameter Symbol Limit Values TA = 25 °C min. typ. Limit Values TA = – 55 to 125 °C max. min. Unit max. Slew rate for non-inverting operation Slew rate for inverting operation SR 6 2 12 V/µs1) SR 6 2 11 V/µs1) Input offset voltage, RG = 50 Ω VIO –4 4 –6 6 mV Input offset current Input current IIO II – 50 50 100 – 75 75 150 nA nA Open-loop voltage gain GV0 75 1) 40 Ck = 15 pF Semiconductor Group 8 70 dB TAE 1453 TAF 1453 Typical Characteristics of Electrical Parameters Load Characteristics Output Saturation Voltage versus Output Current Output Saturation Voltage versus Output Current Semiconductor Group 9 TAE 1453 TAF 1453 Supply Current versus Supply Voltage Input Current and Input Offset Current versus Supply Voltage Semiconductor Group 10 TAE 1453 TAF 1453 Input Offset Voltage versus Supply Voltage VIO Behavior at Low Operating Voltages Input Offset Voltage versus Supply Voltage Semiconductor Group 11