15KP

M15KP22A – M15KP280CA(e3)
Available
15,000 Watt Transient Voltage Suppressor
(TVS) Protection Device
Screening in
reference to
MIL-PRF-19500
available
DESCRIPTION
This Transient Voltage Suppressor series of M15KP22A – M15KP280CA offers an extended
voltage range and also provides a variety of high reliability, uni- and bi-directional options as
well. RoHS compliant versions are also available. These devices have the ability to clamp
dangerous high voltage transients such as secondary effects of lightning strikes, providing
circuit protection to several class levels in the IEC61000-4-5 specification. Clamping time is
virtually instantaneous. It also provides protection from transients caused by inductive load
dumps, RFI, and ESD, providing protection to IEC61000-4-2 and -4-4.
Important: For the latest information, visit our website http://www.microsemi.com.
FEATURES
•
•
•
•
•
•
•
•
Available in both unidirectional and bidirectional configurations
3σ lot norm screening performed on standby current I D
100% surge tested devices
Suppresses transients up to 15 kW @ 10/1000 µs and 100 kW @ 8/20 µs (see Figure 1)
Various screenings in reference to MIL-PRF-19500 are available. Refer to Hirel Non-Hermetic
Product Portfolio for more details on the screening options.
(See part nomenclature for all options.)
High reliability controlled devices have wafer fabrication and assembly lot traceability
Moisture classification is level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant versions are available
DO-204AR
Package
APPLICATIONS / BENEFITS
•
•
•
•
•
•
•
•
Selections from 22 to 280 volts stand-off voltage (V WM )
Economical TVS series for thru-hole mounting
Protection from switching transients & induced RFI
Fast sub-nanosecond response (unidirectional)
Compliant to IEC 61000-4-2 and IEC 61000-4-4 for ESD and EFT protection respectively
Secondary lightning protection per IEC61000-4-5 with 42 ohms source impedance:
Class 1, 2, 3, 4: M15KP22A to M15KP280CA
Class 5: M15KP22A to M15KP280CA (short distance)
Class 5: 1M5KP22A to M15KP110CA (long distance)
Secondary lightning protection per IEC61000-4-5 with 12 ohms source impedance:
Class 1 & 2: M15KP22A to M15KP280CA
Class 3: M15KP22A to M15KP240CA
Class 4: M15KP22A to M15KP120CA
Secondary lightning protection per IEC61000-4-5 with 2 ohms source impedance:
Class 2: M15KP22A to M15KP220CA
Class 3: M15KP22A to M15KP110CA
Class 4: M15KP22A to M15KP54CA
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
RF01011, Rev. D (15/06/15)
©2015 Microsemi Corporation
Page 1 of 7
M15KP22A – M15KP280CA(e3)
MAXIMUM RATINGS @ 25 ºC unless otherwise noted
Parameters/Test Conditions
Junction and Storage Temperature
Thermal Resistance, Junction to Lead @ 3/8 inch (10 mm)
lead length from body
(1)
Thermal Resistance, Junction to Ambient
(2)
Peak Pulse Power Dissipation
10/1000us
Steady-State Power Dissipation @ T L = 30 ºC 3/8 inch
(10 mm) from body
Unidirectional
T clamping (0 volts to V (BR) min, theoretical)
Bidirectional
(3)
Surge Peak Forward Current
Solder Temperature @ 10 s
Symbol
Value
T J and
T STG
R ӨJL
-65 to +150
20
o
C/W
R ӨJA
P PP
PD
80
15,000
6
(1)
1.56
< 100
<5
200
260
o
C/W
W
W
I FSM
Unit
o
C
ps
ns
A
o
C
Notes: 1. When mounted on FR4 PC board with 4 mm2 copper pads (1 oz) and track width 1 mm, length 25 mm.
2. With impulse repetition rate (duty factor) of 0.01 % or less (also Figures 1 and 2).
3. At 8.3 ms half-sine wave for unidirectional devices only.
MECHANICAL and PACKAGING
•
•
•
•
•
•
•
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0.
TERMINALS: Tin-lead or RoHS compliant annealed matte-tin plating. Solderable per MIL-STD-750, method 2026.
MARKING: Part number.
POLARITY: Cathode indicated by band. No cathode band on bidirectional devices.
TAPE & REEL option: Standard per EIA-296 (add “TR” suffix to part number). Consult factory for quantities.
WEIGHT: Approximately 1.4 grams.
See Package Dimensions on last page.
PART NOMENCLATURE
M
15
K
P
22
C
Reliability Level*
M
MA
MX
MXL
(*see Hirel Non-Hermetic
Product Portfolio)
A
(e3)
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
Voltage Tolerance
A = 5% tolerance level
Polarity
C = Bi-directional
Blank = Unidirectional
Peak Pulse Power
Kilowatt Rating
Stand-off Voltage Rating
(see Electrical Characteristics
table)
Encapsulated Plastic
Package
RF01011, Rev. D (15/06/15)
©2015 Microsemi Corporation
Page 2 of 7
M15KP22A – M15KP280CA(e3)
SYMBOLS & DEFINITIONS
Definition
Symbol
α V(BR)
I (BR)
ID
I FSM
I PP
P PP
V (BR)
VC
V WM
Temperature Coefficient of Breakdown Voltage: The change in breakdown voltage divided by the change in
temperature that caused it expressed in %/°C or mV/°C.
Breakdown Current: The current used for measuring Breakdown Voltage V (BR) .
Standby Current: The current through the device at rated stand-off voltage.
Surge Peak Forward Current: The forward current including all nonrepetitive transient currents but excluding all
repetitive transients (ref JESD282-B).
Peak Impulse Current: The maximum rated random recurring peak impulse current or nonrepetitive peak impulse
current that may be applied to a device. A random recurring or nonrepetitive transient current is usually due to an
external cause, and it is assumed that its effect will have completely disappeared before the next transient arrives.
Peak Pulse Power. The rated random recurring peak impulse power or rated nonrepetitive peak impulse power. The
impulse power is the maximum-rated value of the product of I PP and V C .
Breakdown Voltage: The voltage across the device at a specified current I (BR) in the breakdown region.
Clamping Voltage: The voltage across the device in a region of low differential resistance during the application of an
impulse current (I PP ) for a specified waveform.
Working Standoff Voltage: The maximum-rated value of dc or repetitive peak positive cathode-to-anode voltage that
may be continuously applied over the standard operating temperature.
RF01011, Rev. D (15/06/15)
©2015 Microsemi Corporation
Page 3 of 7
M15KP22A – M15KP280CA(e3)
ELECTRICAL CHARACTERISTICS @ 25 ºC
PART NUMBER
REVERSE
STANDOFF
VOLTAGE
V WM
(Note 1)
BREAKDOWN
VOLTAGE
V (BR) @ I (BR)
MAXIMUM
CLAMPING
VOLTAGE
V C @ I PP
MAXIMUM
STANDBY
CURRENT
I D @ V WM
V
V
mA
V
µA
M15KP22A
22
24.4
37.1
500
10
24
26.7
40.7
150
5
M15KP24A
M15KP26A
26
28.9
44.0
50
5
M15KP28A
28
31.1
47.5
25
5
M15KP30A
30
33.3
50.7
15
5
33
36.7
54.8
10
5
M15KP33A
M15KP36A
36
40.0
59.7
10
5
40
44.4
65.8
10
5
M15KP40A
M15KP43A
43
47.8
69.7
10
5
M15KP45A
45
50.0
73.0
10
5
M15KP48A
48
53.3
77.7
10
5
51
56.7
82.8
10
5
M15KP51A
M15KP54A
54
60.0
87.5
10
5
58
64.4
94.0
10
5
M15KP58A
M15KP60A
60
66.7
97.3
10
5
M15KP64A
64
71.1
104
10
5
M15KP70A
70
77.8
114
10
5
75
83.3
122
10
5
M15KP75A
M15KP78A
78
86.7
126
10
5
85
94.4
137
10
5
M15KP85A
M15KP90A
90
100
146
10
5
M15KP100A
100
111
162
10
5
M15KP110A
110
122
178
10
5
120
133
193
10
5
M15KP120A
M15KP130A
130
144
209
10
5
150
167
243
10
5
M15KP150A
M15KP160A
160
178
259
10
5
M15KP170A
170
189
275
10
5
M15KP180A
180
200
291
10
5
200
222
322
10
5
M15KP200A
M15KP220A
220
245
356
10
5
240
267
388
10
5
M15KP240A
M15KP260A
260
289
419
10
5
M15KP280A
280
311
452
10
5
** Consult factory for availability of the 17 and 18 Volt devices on a special order basis.
MAXIMUM
PEAK PULSE
CURRENT
I PP
(FIG. 2)
MAXIMUM
TEMPERATURE
COEFFICIENT OF
V (BR)
α V(BR)
A
404
369
341
316
296
274
251
228
215
205
193
181
171
160
154
144
132
123
119
109
103
93
84
78
72
62
58
55
52
47
42
39
36
33
mV/ºC
24
27
29
31
34
38
41
46
50
52
56
60
63
68
71
76
83
89
93
102
109
121
133
145
157
183
195
207
219
243
269
293
317
342
NOTES:
1.
Transient Voltage Suppressors are normally selected with reverse “stand-off voltage” (VWM) which should be equal to or greater than the
dc or continuous peak operating voltage level.
RF01011, Rev. D (15/06/15)
©2015 Microsemi Corporation
Page 4 of 7
M15KP22A – M15KP280CA(e3)
Ppp – Peak Pulse Power (kW)
GRAPHS
Waveform Non-Repetitive
t d – Pulse Width
Pulse Current in Percent of IPP
FIGURE 1
Peak Pulse Power Rating Curve
t – Time – ms
Test waveform parameters: tr=10 µs, tp=1000 µs
FIGURE 2
Pulse Waveform for 10/1000 µs Exponential Surge
RF01011, Rev. D (15/06/15)
©2015 Microsemi Corporation
Page 5 of 7
M15KP22A – M15KP280CA(e3)
C, Capacitance (pF)
GRAPHS (continued)
V (BR) – Reverse Breakdown Voltage (V)
FIGURE 3
Typical Junction Capacitance
Peak Pulse Power (Ppp) or continuous
Average Power in Percent of 25°C
NOTE: For bidirectional construction, capacitance will be one-half that shown.
Lead or Ambient Temperature °C
FIGURE 4
Derating Curve
RF01011, Rev. D (15/06/15)
©2015 Microsemi Corporation
Page 6 of 7
M15KP22A – M15KP280CA(e3)
PACKAGE DIMENSIONS
Dim
LL
BL
BD
LD
RF01011, Rev. D (15/06/15)
©2015 Microsemi Corporation
Dimensions
Inch
Millimeters
Min
Max
Min
Max
1.100 1.500 27.95
38.1
0.365 0.375
9.27
9.52
0.240 0.250
6.1
6.35
0.048 0.052
1.22
1.32
Page 7 of 7