ACSP-2154P

ACSP-2154P
Broadband Flat Schottky Detector
Data Sheet Revision Date: 12/22/2015
The most important thing we build is trust
DESCRIPTION:
These schottky diode detectors are designed for optimum output voltage
flatness vs. input frequency. Excellent flatness performance is maintained up
through +15dBm input power.
Many forms of detectors exhibit uneven expansion and unacceptable
flatness at higher power levels. Our design minimizes this effect making the
detectors more useful and accurate as broadband power monitors.
SPECIFICATIONS:
Parameter
Frequency Range (min)
GHz
Minimum Output Voltage
OUTLINE DRAWING:
Specification
Unit of Measure
18 - 26
GHz
800
mV/mW
4
mV
FEATURES:
•
Contains hermetically sealed modules, internal RF
matching, DC return, and RF bypass capacitor
•
The video port is protected from static or transient
charges
•
Input impedance matching
•
Models may be chosen for broadband RF performance
of for optimized narrow bands
STANDARD CASE STYLE C36
(Optional Case Styles – C37, M61)
Revised Date: 12/22/2015
(732) 460-0212
www.cobham.com/CSCS
1
ACSP-2154P
Broadband Flat Schottky Detector
NOTES:
ENVIRONMENTAL SPECIFICATIONS*:
Maximum input power: +14 dBm
(3 dB guardband for +17 dBm possible burnout)
MIL-E-5400, MIL-STD-202, MIL-E-16400
Sensitivity is measured into an open circuit load
(>10k ohm).
Storage Temp: -65°C to +150°C
Operating Temp: -55°C to +125°C
Humidity: MIL-STD-202F, M103, Cond B
SCREENING:
Shock: MIL-STD-202F, M213, Cond B
Internal Visual per MIL-STD-883, Method 2017
Altitude: MIL-STD-202F, M105, Cond B
Temperature Cycle: -65°C to +100°C, 10 cycles
Vibration: MIL-STD-202F, M204, Cond B
OPTIONAL HIGH-REL SCREENING
(Ref MIL-PRF-38534):
Thermal Shock: MIL-STD-202F, M107, Cond A
* Compliant by design, verification optional
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
Leak Test per MIL-STD-883, Method 1014
External Visual per MIL-STD-883, Method 2009
PART NUMBER ORDERING INFORMATION:
Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACSP-2154N)
Add desired case style suffix: “C36” (Ex: ACSP-2154NC36)
Add “R” suffix: Reverse Connector Configuration (Ex: ACSP-2154NC36R) (SMA Female Input/SMA Male Output)
Add “-RC” suffix: RoHS-compliant (Ex: ACSP-2154NC36 -RC)
ISO 9001:2008 and AS9100 certified
For further information please contact:
Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make
changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales
representative to verify that the information in this data sheet is current before using this product. CSCS
does not assume any responsibility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a
product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of CSCS or of third parties.
Cobham Signal & Control Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212
Fax: (732) 460-0214
[email protected]
Copyright 2015, Cobham Signal & Control Solutions. All rights reserved.
Revised Date: 12/22/2015
(732) 460-0212
www.cobham.com/CSCS
2