ACSP-2521 Padded Zero Bias Schottky Detector Data Sheet Revision Date: 12/22/2015 The most important thing we build is trust DESCRIPTION: Detectors with internal attenuators are often requested. They are typically used in circuits where an improved RF match is needed or where the power levels applied are higher than is typical for low level detectors. Frequently, they are used in laboratory applications with associated instruments such as broadband power leveling or monitoring. These detectors are all zero bias, making them convenient to use. SPECIFICATIONS: Parameter Frequency Range (min) Flatness vs. Frequency (max) Typical TSS Internal Attenuation Sensitivity (min) OUTLINE DRAWING: Specification Unit of Measure 5 – 18 GHz 0.5/octave ±dB -44 dBm 6 dB 500 mV/mW FEATURES: • Contains hermetically sealed modules, internal RF matching, DC return, and RF Bypass capacitor • The video port is protected from static or transient charges • Input impedance matching • Models may Be chosen for BroadBand RF performance of for optimized narrow Bands STANDARD CASE STYLE C3 (Optional Case Styles – C15, C32) Revised Date: 12/22/2015 (732) 460-0212 www.cobham.com/CSCS 1 ACSP-2521 Padded Zero Bias Schottky Detector NOTES: ENVIRONMENTAL SPECIFICATIONS*: Maximum input power: +23 dBm MIL-E-5400, MIL-STD-202, MIL-E-16400 Sensitivity is measured into an open circuit load (>10k ohm). Operating Temp: -55°C to +125°C The temperature performance of the zero Bias schottky is poor when operating at low input power levels. Humidity: MIL-STD-202F, M103, Cond B SCREENING: Storage Temp: -65°C to +150°C Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Internal Visual per MIL-STD-883, Method 2017 Vibration: MIL-STD-202F, M204, Cond B Temperature Cycle: -65°C to +100°C, 10 cycles Thermal Shock: MIL-STD-202F, M107, Cond A OPTIONAL HIGH-REL SCREENING (Ref MIL-PRF-38534): * Compliant by design, verification optional Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Leak Test per MIL-STD-883, Method 1014 External Visual per MIL-STD-883, Method 2009 PART NUMBER ORDERING INFORMATION: Add desired polarity suffix: “N” for Negative, “P” for Positive (Ex: ACSP-2521N) Add “Z” for zero Biased schottky (Ex: ACSP-2521NZ) Add desired case style suffix: “C3” (Ex: ACSP-2521NZC3) Add “-RC” suffix: RoHS-compliant (Ex: ACSP-2521NZC3-RC) ISO 9001:2008 and AS9100 certified For further information please contact: Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales representative to verify that the information in this data sheet is current before using this product. CSCS does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of CSCS or of third parties. Cobham Signal & Control Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Phone: (732) 460-0212 Fax: (732) 460-0214 [email protected] Copyright 2015, Cobham Signal & Control Solutions. All rights reserved. Revised Date: 12/22/2015 (732) 460-0212 www.cobham.com/CSCS 2