ACLM-4748F

ACLM-4748F
Surface Mount Limiter
Data Sheet Revision Date: 12/22/2015
The most important thing we build is trust
DESCRIPTION:
This series of surface mount limiters was developed to offer higher power handling than
our conventional limiters in a small compact design.
Covering the band from 20 - 6000MHz, these devices can limit input power levels of 10W
CW over the operating temperature range of -55C to +85C. Peak power handling is rated
to 1kW with a 1us pulse width and a 0.1% duty cycle. Typical leakage levels are less than
12.5dBm (measured at 1W input).
These units are available in both drop-in and surface mount packages. Coaxial
configurations are available upon request.
SPECIFICATIONS:
Parameter
Specification
Unit of Measure
Frequency Range (min)
0.020 – 6.0
GHz
Peak Input Power (max)
1000
W
CW Input Power (max)
10
W
CW Flat Leakage (max)
12.5
dBm
Insertion Loss (max)
1.0
dB
1.4:1
ratio
VSWR (max)
OUTLINE DRAWING:
FEATURES:
•
Limits input power levels of 10 W CW
•
Offered in drop in and surface mount packages
•
Coaxial configurations available upon request
•
RoHS Compliant
•
Low Insertion Loss
•
Low Leakage Power Circuit Protection
•
High CW Power Handling
•
Hermtically Sealed Modules
STANDARD CASE STYLE M17
(OPTIONAL CASE STYLES M16, M22)
Revised Date: 12/22/2015
(732) 460-0212
www.cobham.com/CSCS
1
ACLM-4748F
Surface Mount Limiter
NOTES:
ENVIRONMENTAL SPECIFICATIONS*:
Typically CW leakage is measured at mid-band with 1 W
input.
MIL-E-5400, MIL-STD-202, MIL-E-16400
Power handling is rated from -55°C to +85°C.
Storage Temp: -65 °C to +125 °C
Operating Temp: -55 °C to +85 °C
Shock: MIL-STD-202F, M213, Cond B
SCREENING:
Altitude: MIL-STD-202F, M105, Cond B
Internal Visual per MIL-STD-883, Method 2017
Vibration: MIL-STD-202F, M204, Cond B
Temperature Cycle: -65°C to +100°C, 10 cycles
Thermal Shock: MIL-STD-202F, M107, Cond A
OPTIONAL HIGH-REL SCREENING
(Ref MIL-PRF-38534):
* Compliant by design, verification optional
Stabilization Bake per MIL-STD-883, Method 1008
Temperature Cycle per MIL-STD-883, Method 1010
Constant Acceleration per MIL-STD-883, Method 2001
Burn-in per MIL-STD-883, Method 1015
External Visual per MIL-STD-883, Method
PART NUMBER ORDERING INFORMATION:
Add desired case style suffix: “M16” (Ex: ACLM-4812FM16)
ISO 9001:2008 and AS9100 certified
For further information please contact:
Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make
changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales
representative to verify that the information in this data sheet is current before using this product. CSCS
does not assume any responsibility or liability arising out of the application or use of any product or service
described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a
product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any
other of the intellectual rights of CSCS or of third parties.
Cobham Signal & Control Solutions
40 Industrial Way East
Eatontown , NJ 07724 [USA]
Phone: (732) 460-0212
Fax: (732) 460-0214
[email protected]
Copyright 2015, Cobham Signal & Control Solutions. All rights reserved.
Revised Date: 12/22/2015
(732) 460-0212
www.cobham.com/CSCS
2