S1U5/S1U5R PIN Diode Switch Single Pole, Single Throw Absorptive/Reflective Data Sheet Revision Date: 11/02/2015 The most important thing we build is trust DESCRIPTION: The S1 series of single pole, single throw PIN diode switches span the frequency range of 10MHz to 18GHz and are available with absorptive or reflective inputs. The switches are available in a wide variety of standard frequency ranges from costeffective narrowband to high-performance broadband. Each switch incorporates a TTL-compatible driver for convenient system integration and operates from +5V and -12V to -18V DC power supplies. All switches incorporate DC blocks at the RF ports. Standard screened switches incorporate epoxy sealed lids and undergo a stringent yet cost effective screening cycle. The switches are also available with hermetic seal and high-rel screening for military and aerospace applications. SPECIFICATIONS: Parameter Absorptive Reflective Unit of Measure 0.5 – 12 0.5 – 12 GHz Insertion Loss (max) 2.7 2.5 dB VSWR (max) (50 ohms) 2.0 2.0 ratio Isolation (min) 70 65 dB Switching Speed (max) 100 100 nsec CW RF Power, Survival 30 30 dBm P1dB* 27 27 dBm Frequency Range *Standard bias configuration OUTLINE DRAWING: FEATURES: • TTL-compatible drivers for convenient system integration • Operates on +5V or +15V and -5V or -15V DC power supplies (see ordering information) • DC blocks at all RF ports • Ruggedized construction • Hermetic versions available • All parts receive internal visual (per MIL-STD-883) and temp cycle (-40 °C to 100 °C, 10 cycles) • Hi-Rel screening available upon request • 30-day lead time on some configurations (contact factory for details) 0.15 1.20 0.35 1.00 0.10 0.10 MODEL NUMBER 0.45 J1 SN: 0000 -V G DC: J2 WWYY +V 0.70 E1 0.90 SMA FEMALE (2) PLCS. Ø 0.10 THRU MOUNTING HOLE (4) PLCS. Ø0.020 X 0.15 LG SOLDER PIN (4) PLCS. 0.38 0.15 (3) PLCS. 0.15 0.38 REF. OUTLINE CASE STYLE S1 Revised Date: 11/02/2015 (732) 460-0212 www.cobham.com/CSCS 1 S1U5/S1U5R PIN Diode Switch Single Pole, Single Throw, Absorptive/Reflective NOTES: ENVIRONMENTAL SPECIFICATIONS*: DC Bias: (Standard) +5 V +/- 0.5 V @ 50 mA max -15 V +/- 3 V @ 50 mA max MIL-E-5400, MIL-STD-202, MIL-E-16400 DC Bias: (-5 option) +5 V +/- 0.5 V @ 60 mA max -5 V +/- 0.5 V @ 60 mA max Operating Temp: -40 °C to +71 °C Storage Temp: -65 °C to +125 °C DC Bias: (-12 option) +15 V +/- 3 V @ 50 mA max -15 V +/- 3 V @ 50 mA max Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Control: TTL 0 = Low Loss TTL 1 = Isolation Altitude: MIL-STD-202F, M105, Cond B Vibration: MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Absorptive Switch: 50 ohm termination present at both RF ports (in isolation mode). * Compliant by design, verification optional Switching speed is defined as 50% TTL to 90% RF (t-on) and 50% TTL to 10% RF (t-off). Finish: Gold Plate per MIL-G-45204 Weight: 20g (max) PART NUMBER ORDERING INFORMATION: Add Add Add Add Add Add Add Add “-RC” suffix: RoHS-compliant “-H” suffix: Hermetic seal “-5” suffix: +/-5 V DC supplies “-5-RC” suffix: +/-5 V DC supplies, RoHS-compliant “-5-H” suffix: +/-5 V DC supplies, Hermetic seal “-12” suffix: +/-15 V DC supplies “-12-RC” suffix: +/-15 V DC supplies, RoHS-compliant “-12-H” suffix: +/-15 V DC supplies, Hermetic seal ISO 9001:2008 and AS9100 certified For further information please contact: Aeroflex Control Components, DBA Cobham Signal & Control Solutions (CSCS) reserves the right to make changes to any products and services herein at any time without notice. Consult CSCS or an authorized sales representative to verify that the information in this data sheet is current before using this product. CSCS does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by CSCS; nor does the purchase, lease, or use of a product or service from CSCS convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of CSCS or of third parties. Cobham Signal & Control Solutions 40 Industrial Way East Eatontown , NJ 07724 [USA] Phone: (732) 460-0212 Fax: (732) 460-0214 [email protected] Copyright 2015, Cobham Signal & Control Solutions. All rights reserved. Revised Date: 11/02/2015 (732) 460-0212 www.cobham.com/CSCS 2