FR301_7G PRV : 50 - 1000 Volts Io : 3.0 Amperes Features • Glass passivated chip • High current capability • High reliability • Low reverse current • Low forward voltage drop • Fast switching for high efficiency • RoHS compliant package Mechanical Data • Case : DO-201AD Molded plastic • Epoxy : UL94V-O rate flame retardant • Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed • Polarity : Color band denotes cathode end • Mounting position : Any • Weight : 1.10 grams Packing & Order Information Graphic symbol 1,250/T MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specifie. Single phase, half wave, 60 Hz, resistive or inductive load For capacitive load, derate current by 20% Symbol FR 301G FR 302G FR 303G FR 304G FR 305G FR 306G FR 307G FR307G -STR Unit VRRM 50 100 200 400 600 800 1000 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 1000 V Rating Maximum Recurrent Peak Reverse Voltage Maximum Average Forward Current 0.375"(9.5mm) Lead IF(AV) 3.0 Length Ta = 55 °C Publication Order Number: [FR301_7G] © Bruckewell Technology Corporation Rev. A -2014 A FR301_7G PRV : 50 - 1000 Volts Io : 3.0 Amperes Rating at 25 °C ambient temperature unless otherwise specifie. Single phase, half wave, 60 Hz, resistive or inductive load For capacitive load, derate current by 20% Rating Symbol FR 301G FR 302G FR 303G FR 304G FR 305G FR 306G FR 307G FR307G -STR Unit Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load IFSM 100 A VF 1.3 V IR 5.0 μA IR(H) 100 μA (JEDEC Method) Maximum instantaneous forw ard voltage at IF =3.0 A Maximum DC Reverse Current Ta = 25 °C at Rated DC Blocking Voltage Ta = 100 °C Maximum Reverse Recovery Time ( Note 1 ) Typical Junction Capacitance Trr 150 250 500 250 ns CJ 60 pF Junction Temperature Range TJ -65 to +150 °C Storage Temperature Range TSTG -65 to +150 °C ( Note 2 ) Notes : ( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. ( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC Publication Order Number: [FR301_7G] © Bruckewell Technology Corporation Rev. A -2014 FR301_7G PRV : 50 - 1000 Volts Io : 3.0 Amperes ■RATING AND CHARACTERISTIC CURVES ( FR301G - FR307G-STR ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM FIG.2 - DERATING CURVE FOR OUTPUT FIG.3 - MAXIMUM NON-REPETITIVE PEAK FORWARD RECTIFIED CURRENT SURGE CURRENT FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS Publication Order Number: [FR301_7G] © Bruckewell Technology Corporation Rev. A -2014 FR301_7G PRV : 50 - 1000 Volts Io : 3.0 Amperes Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [FR301_7G] © Bruckewell Technology Corporation Rev. A -2014