GROA_M PRV : 50 - 1000 Volts Io : 1.5 Amperes Features • High current capability • High surge current capability • High reliability • Low reverse current • Low forward voltage drop • Fast switching for high efficiency • RoHS compliant package Mechanical Data • SOD-123FL • Epoxy : UL94V-O rate flame retardant • Lead : Lead Formed for Surface Mount • Polarity : Color band denotes cathode end • Mounting position : Any • Weight : 0.063 gram Packing & Order Information 3,000/Reel Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Rating Symbol GROA GROB GROD Maximum Recurrent Peak Reverse GROG GROJ GROK GROM Unit VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Voltage Maximum Average Forward Current Tc = 50°C Maximum Peak Forward Voltage at IF = 1.5 A Publication Order Number: [GROA_M] IF(AV) 1.5 A VF 1.3 V © Bruckewell Technology Corporation Rev. A -2016 GROA_M PRV : 50 - 1000 Volts Io : 1.5 Amperes Rating at 25 °C ambient temperature unless otherwise specified. Rating Symbol GROA GROB GROD GROG GROJ GROK GROM Unit Maximum Peak Forward Surge Current,8.3ms Single half sine wave IFSM 50 V IR 5 μA IR(H) 100 μA CJ 30 pF Junction temperature range TJ -65 to +150 °C Storage temperature range TSTG -65 to +150 °C superimposed on rated load (JEDEC Method) Maximum DC Reverse Current Ta = 25°C at Rated DC Blocking Voltage Ta = 100°C Typical Junction capacitance (Note 2) NOTE: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC Publication Order Number: [GROA_M] © Bruckewell Technology Corporation Rev. A -2016 GROA_M PRV : 50 - 1000 Volts Io : 1.5 Amperes ■RATING AND CHARACTERISTIC CURVES ( GROA - GROM ) FIG.1 –REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM FIG.2 – DERATING CURVE FOR OUTPUT FIG.3 – MAXIMUM NON-REPETITIVE PEAK FORWARD RECTIFIED CURRENT SURGE CURRENT FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS Publication Order Number: [GROA_M] © Bruckewell Technology Corporation Rev. A -2016 GROA_M PRV : 50 - 1000 Volts Io : 1.5 Amperes Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [GROA_M] © Bruckewell Technology Corporation Rev. A -2016