SS515B SCHOTTKY RECTIFIER Features • Ideal for surface mount applications . Easy pick and place • Built-in strain relief • Low forward voltage drop • RoHS compliant package Mechanical Data • Case: Molded plastic • Epoxy: UL 94V-0 rate flame retardant • Metallurgically bonded construction • Polarity: Color band denotes cathode end . Mounting position: Any • Weight: 0.93 grams Packing & Order Information 3,000/Reel Graphic symbol MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Maximum Ratings (Tc=25°C unless otherwise noted) Parameter Symbol SS515B Unit Maximum repetitive peak reverse voltage VRRM 150 V Working peak reverse voltage VRWM 150 V Maximum DC blocking voltage VDC 150 V IF(AV) 5 A IFSM 120 A TJ -50 to +150 °C TSTG -50 to +175 °C Maximum average forward rectified current Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Operating junction temperature range Storage temperature range Notes: Mounted on 2” Square PC Board with 1” Square Total Pad Size, PC Board FR4. Publication Order Number: [SS515B] © Bruckewell Technology Corporation Rev. A -2014 SS515B SCHOTTKY RECTIFIER Electrical characteristics (Tc=25°C unless otherwise noted) Parameter Symbol Instantaneous forward voltage at IF=5A, Tj=25°C Maximum reverse current VF Value Typical Max 0.87 Tj=25°C 0.95 Unit V 0.1 m’A 10 m’A Value Unit IR at working peak reverse voltage Tj=125°C Thermal characteristics (Tc=25°C unless otherwise noted) Parameter Typical thermal resistance Symbol SS515B RθJL 50 Rthja 80 °C/W Notes: (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms Publication Order Number: [SS515B] © Bruckewell Technology Corporation Rev. A -2014 SS515B SCHOTTKY RECTIFIER ■RATING AND CHARACTERISTIC CURVES FIG.1-FORWARD DERATIVE CURVE FIG.2-MAXFWD NON-REPETITIVE FORWARD SUGE CURRENT FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTIC Publication Order Number: [SS515B] © Bruckewell Technology Corporation Rev. A -2014 SS515B SCHOTTKY RECTIFIER Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [SS515B] © Bruckewell Technology Corporation Rev. A -2014