November 2, 2005 PCN Number: 0515 PCN Change Level: Major Subject: New Version of Silicon Sculptor Software for A54SX32 and A54SX16P Dear Customer, This notice is to inform you that Actel has released a new version of Silicon Sculptor software v3.92.2 DOS/v4.55.2 WIN. This version should be used when programming the A54SX32 and A54SX16P devices. The products affected are listed in Table 1. Table 1: Affected Devices Device A54SX16P A54SX16P A54SX16P A54SX16P A54SX16P A54SX16P A54SX16P A54SX16P A54SX32 A54SX32 A54SX32 A54SX32 A54SX32 A54SX32 A54SX32 A54SX32 A54SX32 A54SX32 A54SX32 A54SX32 Note: Package RoHS-Compliant PQ208 PQG208 TQ144 TQG144 TQ176 TQG176 VQ100 VQG100 PQ208 PQG208 TQ144 TQG144 TQ176 TQG176 BG313 BGG313 BG329 BGG329 CQ208 * CQ256 * * Includes DSCC SMD Part Number: 5962-9958601QXC, 5962-9958602QXC, 5962-9958601QYC, and 5962-9958602QYC Actel Corporation 2061 Stierlin Court, Mountain View, CA 94043 Phone: 650.318.4200 Fax 650.318.4600 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ This version of software will reduce the programming time on the above devices. This includes all temperature (C, I, M, and Class B) and speed grades (Std., –1, –2, and –3). Download the software at: http://www.actel.com/custsup/updates/silisculpt/ sculptor3922.html. This software version and later versions should be used when programming the above devices. For questions, please contact the Actel Technical Support hotline at [email protected]. Regards, Actel Corporation Actel Corporation 2061 Stierlin Court, Mountain View, CA 94043 Phone: 650.318.4200 Fax 650.318.4600