MS23P01 P-Channel 20-V (D-S) MOSFET Description These miniature surface mount MOSFETs utilize a high cell density trench process to provide low rDS(on) and to ensure minimal power loss and heat dissipation. Typical applications are DC-DC converters and power management in portable and battery-powered products such as computers, printers, PCMCIA cards, cellular and cordless telephones. Features • Low rDS(on) provides higher efficiency and extends battery life •Low thermal impedance copper lead frame • SOT-23 saves board space • Fast switching speed • High performance trench technology • RoHS compliant package Packing & Order Information 3,000/Reel Graphic symbol Publication Order Number: [MS23P01] © Bruckewell Technology Corporation Rev. A -2014 MS23P01 P-Channel 20-V (D-S) MOSFET MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings (TA=25°C unless otherwise specified) Symbol Parameter Value Unit VDS Drain-Source Voltage -20 V VGS Gate-Source Voltage ±8 V a -2.6 A a -1.5 A -10 A ±1.6 A a 1.25 W a 0.8 W -55 to +150 °C Continuous Drain Current (TA =25°C) ID Continuous Drain Current (TA =70°C) Pulsed Drain Current IDM IS b Continuous Source Current (Diode Conduction) a Power Dissipation (TA =25°C) PD Power Dissipation (TA =70°C) TJ/TSTG Operating Junction and Storage Temperature THERMAL RESISTANCE RATINGS Symbol Parameter Maximum a 100 a 166 Maximum Junction-to-Ambient (t <= 5 sec) RθJA Maximum Junction-to-Ambient (Steady-State) Units °C/W Notes: a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature Static Symbol Parameter Test Conditions Min VGS(th) Gate-Threshold Voltage VDS = VGS, ID = -250μA -0.4 IGSS Gate-Body Leakage VDS = 0 V , VGS = ±8 V IDSS Zero Gate Voltage Drain Current ID(on) On-State Drain Current r A gfs Forward Tranconductance VSD Diode Forward Voltage Dynamic Symbol A A Max. Units -1 ±100 VDS = -16 V , VGS = 0 V -1 VDS = -16 V , VGS = 0 V , TJ= 55°C -10 VDS = -5 V, VGS = -4.5 V Drain-Source On-Resistance DS(on) Typ. -3 nA uA A VGS = -4.5 V, ID = -2.6 A 0.130 VGS = -2.5V, ID = -2.1 A 0.190 Ω VDS = -5 V, ID = -2.8 A 3 S IS = -1.6 V, VGS = 0 V -0.70 V b Parameter Test Conditions Min Typ. Max. Units -- 6.5 -- ns td(on) Turn-On Delay Time tr Rise Time VDD = -5 V , RL = -5 OHM -- 20 -- ns td(off) Turn-Off Delay Time VGEN = -4.5 V , RG = 6 OHM -- 31 -- ns tf Fall Time -- 21 -- ns Publication Order Number: [MS23P01] © Bruckewell Technology Corporation Rev. A -2014 MS23P01 P-Channel 20-V (D-S) MOSFET Dynamic Symbol Qg b Parameter Test Conditions Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDS = -5 V , ID = -2.6 A, VGS = -4.5 V Min Typ. Max. Units -- 12.2 -- nC -- 1.1 -- nC -- 1.5 -- nC Notes: a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Publication Order Number: [MS23P01] © Bruckewell Technology Corporation Rev. A -2014 MS23P01 P-Channel 20-V (D-S) MOSFET ■Characteristic Curves FIG.1-ON REGION CHARACTERISTICS FIG.2-ON-RESISTANCE VARIATION WITH DRAIN CURRENT AND GATE VOLTAGE FIG.3-ON RESISTANCE VARIATION WITH FIG.4-ON-RESISTANCE VARIATION WITH GATE TO TEMPERATURE SOURCE VOLTAGE FIG.5-TRANSFER CHARACTERISTICS FIG.6-BODY DIODE FORWARD VOLTAGE VARIATION WITH SOURCE CURRENT AND TEMPERATURE Publication Order Number: [MS23P01] © Bruckewell Technology Corporation Rev. A -2014 MS23P01 P-Channel 20-V (D-S) MOSFET ■Characteristic Curves FIG.7-GATE CHARGE CHARACTERISTIC FIG.8-CAPACITANCE CHARACTERISTIC FIG.9-MAXIMUM SAFE OPERATING AREA FIG.10-SINGLE PULSE MAXIMUM POWER DISSIPATION FIG.11-TRANSIENT THERMAL RESPONSE CURVE Publication Order Number: [MS23P01] © Bruckewell Technology Corporation Rev. A -2014 MS23P01 P-Channel 20-V (D-S) MOSFET Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [MS23P01] © Bruckewell Technology Corporation Rev. A -2014